Cobro Corp. has two openings for System Safety Engineers at the U. S. Army
Safety Center, Ft. Rucker, AL.
Job Description: Performs a variety of systems safety engineering, risk
management integration duties. Serve as primary monitor and coordinator of the
Army System Safety Program. Assess,
Ron,
I'm sure you'll get lots of responses on this one. Here is what I
believe/know.
For cord connected equipment that connects to wall outlets protected with 20
A overcurrent protection devices, 25 Amps is 125% of rated current. 25A X
0.1Ohms=2.5V, safe even in a damp environment. The NEC
NEC Wiring QuestionMichael,
The 1996 version of the NEC addresses this issue by saying that if a
connector is not specifically listed for an application, it is not OK. The
reference is: 300-15(c) - Fittings Connectors shall be used only with the
specific wiring methods for which they are
From the Paschen curve, the electrical spacings must be increased 14% at
3000 meters over those at 2000 meters. Thermal derating is a tougher call
since some smps vendors engineer in more cooling capacity than others.
Testing for your application is the only reliable way to make a good
Peter,
Try NSSN.com
Best regards,
Dan
Daniel E. Teninty, P.E.
Managing Partner
DTEC Associates LLC
Streamlining The Compliance Process
Advancing New Products To Market
http://www.dtec-associates.com
(509) 443-0215
(509) 443-0181 fax
-Original Message-
From:
a human tendancy
towards creeping elegance and we ned to ensure that the
EMC discipline does not tend in that direction.
My 2c
Charles Grasso
Ansoft Corporation
From: Dan Teninty dteni...@dtec-associates.com
Reply-To: Dan Teninty dteni...@dtec-associates.com
To: PSTC IEEE-EMC emc-p
..
Dell is taking a very professional approach to
addresses ALL the issues - not just EMC.
From: Dan Teninty dteni...@dtec-associates.com
Reply-To: Dan Teninty dteni...@dtec-associates.com
To: Rich Nute ri...@sdd.hp.com, nutwoo...@nutwood.eu.com
CC: emc-p...@majordomo.ieee.org
Subject: RE
The Compliance Process
Advancing New Products To Market
http://www.dtec-associates.com
(509) 443-0215
(509) 443-0181 fax
-Original Message-
From: Dan Teninty [mailto:dteni...@dtec-associates.com]
Sent: Tuesday, November 27, 2001 12:01 PM
To: Rich Nute
Subject: RE: Quality Assurance and Product
Rich,
Dell Computers, as well as a few other major players, take a proactive
approach to compliance and actually have a VP position for compliance. With
a little investigation into the benefits of having a first rate compliance
department with the ability to design for compliance, test to
Here, here !
Best regards,
Daniel E. Teninty, P.E.
Managing Partner
DTEC Associates LLC
http://www.dtec-associates.com
Streamlining the Compliance Process
5406 S. Glendora Drive
Spokane, WA 99223
(509) 443-0215
(509) 443-0181 fax
-Original Message-
From:
Group,
I pulled these from Cigital labs web site. A good first crack at definitions
that perhaps the community could agree on. I am familiar with
MIL-HDBK-882C and have used it on several occasions to evaluate things that
go boom in a loud way. This is generally considered BAD by those in
Don't forget the Product Liability Lawyers ! !
Listing a product does not protect the manufacturer from being sued, it
just establishes that the manufacturer has been duly diligent and therefore
has not been negligent. This makes a huge difference when a lawsuit happens.
In our society, where
RE: Fish paperI smelt that coming :)
Dan
DTEC Associates LLC
http://www.dtec-associates.com
Streamlining the Compliance Process
5406 S. Glendora Drive
Spokane, WA 99223
(509) 443-0215
(509) 443-0181 fax
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
Robert,
I remember solving a similar problem, water cooled heat-sink, using a
machinists handbook. If you have one handy it saves dragging out the Fluid
dynamics text and clearing the cobwebs.
Best regards,
Daniel E. Teninty, P.E.
Managing Partner
DTEC Associates LLC
Robert,
The best I can do is point you in the direction of IEC 479-1 which is by now
IEC 600479. The title is Effects of current passing through the human
body. The electrical model for the human body is derived from this
information. There is a good description of this in Annex A of ANSI/ISA
Do any of my esteemed colleagues know what restrictions EN 55022 places on
Class A equipment? I was having a discussion today and the topic came up. I
understand that a transmitting license is required in Germany? Are there
any other restrictions for Class A equipment?
Thanks in advance,
Do any of my esteemed colleagues know of any specific requirements in 60950
(UL/CSA or EN) relating specifically to hot swappable power supplies? A
search in the PDF version of UL/CSA 60950 reveals nothing specific when
searching for hot, swap, or power supply. A visual search of the TOC
also
EN 61010-1 has indeed been harmonized. In the US it exists as UL 3111 and
ANSI/ISA S82.01. The National Forward addresses NEC specific issues.
Daniel E. Teninty, P.E.
Managing Partner
DTEC Associates LLC
Streamlining the Compliance Process
(509) 443-0215
(509) 443-0181 fax
-Original
components, such as
interlock switches and relays, I would appreciate some information.
Thank you for your thoughts.
Ray
ray_russ...@leco.com
Dan Teninty P.E.
Senior Design Engineer
Product Safety
teni...@tc.fluke.com
FLUKE Corporation
Everett
Rich,
Your response was well considered and appropriate. I think it is good to keep
a perspective on who the users of this fourum are and their mean level of
computer sophistication.
Now that you are no longer the administrator of this fourum, who will be
filling in ?
Dan Teninty P.E
20 matches
Mail list logo