FCC Pt. 15 Section 15.101 has a table listing equipment authorization
requirements for various devices. TV broadcast receivers require verification.
Class B computers and peripherals, Declaration of Conformity. Since
verification requires only that Part 15 tests be performed with data kept
My first response on EMC-PSTC was a bit misleading! For ITE and other portable
devices with cigarette lighter power adapters, 95/54/EC testing is required.
However, 95/54/EC should not be listed as a directive on the Declaration of
Conformity. It should be listed as a technical standard
As an EMC/safety third party test agency, I have performed both CE-Mark
certifications and e-mark type testing of electronic devices. 95/54/EC type
testing may be performed by third party test agencies, or by the manufacturer,
but must be witnessed by a Notified Body. Paragraph 15.3 of the
The European Council has also published a guideline document on the application
of the EMC Directive. You can download it at :
http://www.emc-journal.co.uk/newguide.html Paragraph 7 discusses,
reconditioned, reconfigured and refurbished equipments, both CE marked and not.
In the case of non
I am resending this inquiry, due to the very limited responses, if you have
information that can help me, please pass it along. Thanks!
--
From: Frazee Doug[SMTP:dfra...@windermeregroup.com]
Sent: Monday, March 02, 1998 3:15 PM
To: 'emc-p...@ieee.org'
Cc: Banchero, Bill
I am always looking for convenient sources of international compliance
information. Most recently, my need is for a client that manufactures Ground
Stations for use in air traffic control. The ground stations include an
intentional RF transmitter currently approved for the US as well as
Windermere Information Technology Services, formerly Alliant
Techsystems, Inc.
is seeking the services of a product safety engineer on a consultancy
(contract)
basis for performing Low Voltage Directive product safety evaluations on
a broad
range of electronic devices. Hands on experience with
I have reviewed a copy of the IEC version of this standard. It calls
out a mandatory test plan containing: EUT test configuration, operating
conditions, performance criteria and test descriptions. Immunity
requirements are: 1000-4-2, -3, -4, -5, -6, and -11. Test levels are in
line with the
Can someone give me the link for the VCCI web page please?
Doug Frazee
EMC Compliance Engineer
Alliant Techsystems, Inc.
doug_fra...@atk.com
I have read, with great interest, the first two responses to this
question and am not in complete agreement with them. I guess that this
shows that there are multiple approaches to any compliance issue and
arguments can be made for any of them. With that said, I'll give my
opinion on the most
Environmental ambients are also a problem on OATS testing. Getting to
know the environmental ambient profile helps. If you have a receiver
with A-B trace capability, you can do a rough check by scanning with and
without the UUT powered, and subtracting the scans, theoretically
subtracting out
Guy,
EMC testing of a power supply may give you a warm and fuzzy feeling, but
unfortunately it is no guarantee of EMC compliance when configured with
your portable computer. I recommend the computer/power supply
combination be evaluated to the following EMC standards for usage in
environments
To demonstrate compliance of a computer option board with the EMC
Directive, EN 55022/A1 allows testing in a single compliant host for
emissions. Immunity testing is another matter, with the lack of a
harmonized ITE immunity standard. Is there any consensus or opinions on
the appropriate
A complete listing of European Directives is available, as well as
harmonized standards applicable to each directive
at: http://www2.echo.lu/nasd/
Doug Frazee
EMC Compliance Engineer
Alliant Techsystems, Inc.
Advanced Technology Applications
401 Defense Highway
Annapolis, Maryland 21401
USA
I am looking for info. on availability of test fixtures for IEC 1967
(draft). The document was written by Dr. T. Yangawa. I would also
appreciate help in contacting him for technical assistance.
Doug Frazee
EMC Compliance Engineer
Alliant Techsystems, Inc.
Advanced Technology Applications
401
We use a McIntosh MC2600 stereo/mono audio amplifier. It is 600w
stereo,
1000w mono and can be configured for output impedances of 16, 8, 4, 2 or
1 ohm.
We also use this amp for CS101. Although you could get by with about
200w, the
extra power is often helpful. Even though the amp is rated
Competent Bodies have differing opinions. I believe if you contacted
several, they would not all give the same answer on your ESD question.
Clearly, the trend is to test to IEC 801-2:1991 or EN 61000-4-2, which
call out the same ESD discharge network. Contact discharge is the
preferred method
I am looking for information on applicable directives/standards for EMC
certification of air conditioners, booth rooftop and underhood; air
conditioner/heaters and auxiliary electric heaters for off-road (eg
farm, mining vehicles, boats). All equipments operate on 27.2 VDC or
less. I looked at
I have completed CE certification testing of a large thermal/mechanical
metallurgical test system. Applicable Directives are Machinery, Low
Voltage and EMC. The manufacturer also wishes to sell in Japan. Will
additional testing be required? What are good sources of information
regarding
19 matches
Mail list logo
