RE: IEC 60950-1 section 4.7.3.2 regarding openings in fire enclosures

There also appears to be no requirement for a top and sides of the fire enclosure, only a specific clause for the bottom of the fire enclosure. However I guess any manufacturer who shipped product requiring a fire enclosure without the top and sides of such an enclosure would be quickly called

Power Cord Question

Must a European power cord (H05VV-F) be marked as HAR for harmonised or is a marking of VDE permissible as it indicates approval by VDE, a harmonised European safety agency (harmonised indicted by the use of )? Regards, Craig - This message is from the IEEE Product Safety Engineering Society

CCC Parts Certifications and Periodic Verification

Good morning list members, We currently have 3 lists of ‘critical’ parts from CQC for our ATMs going through the CCC certification process: 1. Parts Modules Requiring CCC Certification These are ATM parts and modules which have already been identified by CQC as

Obsolete standards

Good morning experts, Would anyone be able to forward me a copy of the following obsolete standards? IEC335-1:1991 IEC 34-1 Any assistance would be greatly appreciated. Regards, Craig Craig Petrie, Product Safety Engineer, NCR Financial Solutions Group Ltd., 3rd Floor East, Discovery

CCC Question - alternate parts

Dear experts, The CB reports for our products allow for the use of alternates for the majority of the d.c. powered components as long as the alternate parts provided are to the same procurement spec's as the part listed in the CB report. These parts are rated +24Vdc or less and the majority of

RE: CCC Question - alternate parts

submits an application for change (or application for modification, depending on translation) to CQC (not a new application), according to a vice president of the CQC. Please let me know if I can be of any further assistance. Regards, Grace On 10/29/08, Petrie, Craig D cp185...@ncr.com wrote

CCC Standard - IEC Equivalent request (60950 topic)

Good morning experts, I'm working on CCC approval for some of our products but have come across a stumbling block. The standard CCC are using for their certification is GB 4943-2001. The European equivalent version of this is IEC60950: 1999 (although I have been told not all items are the

CCC Requirements for Harnesses and Manuals

Dear approval experts, I am working on CCC approvals for some Automated Teller Machines (ATMs) at present, and have come across some certification difficulties regarding harnesses and operator manuals. I would be grateful if you could share any similar CCC experiences with me, either by way of

RE: CCC processes

I am beginning to look into how to achieve CCC also. I would be obliged if I was copied on any reply to Richard. Thanks and regards, Craig From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of 'Rich Nute' Sent: 02 July 2008 02:29 To: emc-p...@ieee.org Subject: CCC processes Is there

EMC Standards for Contactless Card Readers

On behalf of a friend, I am enquiring about what EMC standards would be applicable in Europe for a Contactless Card Reader operating at 13.56Mhz. Could anyone be kind enough to advise? Regards, Craig Craig Petrie, Product Safety Engineer, NCR Financial Solutions Group Ltd., 3rd Floor