Interesting. And, no, I wasn’t there, either. I was 6 years old at the time
and had never heard of CISPR then. 😊
Ghery S. Pettit
From: Ari Honkala
Sent: Tuesday, November 19, 2019 12:09 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] 80/80 rule
I found an interesting old
And no, I was not there.
Regards,
Ari Honkala
SESKO
*From:* Ghery S. Pettit [mailto:n6...@comcast.net]
*Sent:* maanantai 18. marraskuuta 2019 21.50
*To:* EMC-PSTC@LISTSERV.IEEE.ORG
*Subject:* Re: [PSES] 80/80 rule
I know it is in VDE 0871/6.78, so it dates back to at least June of
1978. I
From: John Woodgate mailto:j...@woodjohn.uk>>
Sent: Monday, November 18, 2019 11:47 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] 80/80 rule
I agree: I'm almost certain that it is German in origin, and I'm sure it dates
ba
The 80/80 rule was/is applied for auditing manufacturing as, according to
management, 'good enough for government work.' They figured the risk of
getting caught was sufficiently low enough to continue shipping.
Initial testing has no allowance for exceeding the requirements.
An experienced prod
Yes, 20% is an over-estimate for committees with more than five members.
My view (and I think it might even begin to be believed) is that it can
be accepted that standards should not allow, or even encourage, the
shipment of non-compliant product. The manufacturer alone must decide
how to cope
Allen; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] 80/80 rule
That's the 80/20 rule, which is an entirely different thing. It applies to
standards committees; 20 % of members do all the work and 80 % just accept the
results.
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgat
e only
> place I’ve seen a requirement that if a single unit is tested then a 2 dB
> margin is required.
>
> Ghery S. Pettit iNCE
> Pettit EMC Consulting LLC
>
>
> From: John Woodgate
> Sent: Monday, November 18, 2019 11:47 AM
> To: EMC-PSTC@LISTSERV.IEEE
commercial field (military field was, and still is, a
rather different one).
John E Allen
W. London, UK.
*From:*John Woodgate [mailto:j...@woodjohn.uk]
*Sent:* 18 November 2019 19:47
*To:* EMC-PSTC@LISTSERV.IEEE.ORG
*Subject:* Re: [PSES] 80/80 rule
I agree: I'm almost certain that it is G
s, a rather different one).
John E Allen
W. London, UK.
From: John Woodgate [mailto:j...@woodjohn.uk]
Sent: 18 November 2019 19:47
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] 80/80 rule
I agree: I'm almost certain that it is German in origin, and I'm sure it dates
bac
itary field was,
and still is, a rather different one).
John E Allen
W. London, UK.
From: John Woodgate [mailto:j...@woodjohn.uk]
Sent: 18 November 2019 19:47
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] 80/80 rule
I agree: I'm almost certain that it is German in origin, an
From: John Woodgate
Sent: Monday, November 18, 2019 11:47 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] 80/80 rule
I agree: I'm almost certain that it is German in origin, and I'm sure it dates
back to the 20th Century, possibly as early as 1960.
Best wishes
John Wo
I agree: I'm almost certain that it is German in origin, and I'm sure it
dates back to the 20th Century, possibly as early as 1960.
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk
Rayleigh, Essex UK
On 2019-11-18 19:44, John Shinn wrote:
If my memory
If my memory serves me right, as I recall, the 80/80 rule was in at least one
of the VDE standards regarding radiated emissions. I can’t recall the number or
name. This is going back to the late ‘70s or so.
John Shinn
Retired
Sent from my iPhone
> On Nov 18, 2019, at 9:55 AM, John Woodgate w
ate: Monday, November 18, 2019 at 11:18 AM
To:
Subject: Re: [PSES] 80/80 rule
Thanks for your response, but the rule dates back much further.
Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associates
www.woodjohn.uk Rayleigh, Essex UK
On 2019-11-18 18:22, Larry K. Stil
rther.
Mark
From: John Woodgate
Organization: J M Woodgate and Associates
Reply-To: John Woodgate
Date: Monday, November 18, 2019 at 11:18 AM
To:
Subject: Re: [PSES] 80/80 rule
Thanks for your response, but the rule dates back much further.
Best wishes John Woodgate OOO-Own Opi
. Opinions, conclusions and
other information in this message that do not relate to the official business
of my firm shall be understood as neither given nor endorsed by it.
From: John Woodgate
Sent: Monday, November 18, 2019 12:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.O
HEID=ROOTWORKSPACE-add13339-9211-4e73-9f5d-229f45406f61-mm1LfFj
*From:* John Woodgate
*Sent:* Monday, November 18, 2019 12:55 PM
*To:* EMC-PSTC@LISTSERV.IEEE.ORG
*Subject:* [PSES] 80/80 rule
*EXTERNAL SENDER: Verify links, attachments and sender before taking
action*
Can someone tell me when the 80/80 rule
:55 PM
*To:* EMC-PSTC@LISTSERV.IEEE.ORG
*Subject:* [PSES] 80/80 rule
Can someone tell me when the 80/80 rule was introduced into CISPR
standards and if possible, a bit more detail than just the date, please?
--
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associateswww.woodj
y it.
From: John Woodgate
Sent: Monday, November 18, 2019 12:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] 80/80 rule
Can someone tell me when the 80/80 rule was introduced into CISPR standards and
if possible, a bit more detail than just the date, please?
--
Best wishes
John Woodgate OOO-O
-9f5d-229f45406f61/OrthoMailSigLogo160x17.png?MOD=AJPERES&CACHEID=ROOTWORKSPACE-add13339-9211-4e73-9f5d-229f45406f61-mm1LfFj]
From: John Woodgate
Sent: Monday, November 18, 2019 12:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] 80/80 rule
EXTERNAL SENDER: Verify links, attachments and sender befo
Can someone tell me when the 80/80 rule was introduced into CISPR
standards and if possible, a bit more detail than just the date, please?
--
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk
Rayleigh, Essex UK
-
---
21 matches
Mail list logo