You better CE-mark the cord . Passport to Europe.
Gert Gremmen, Ing.
== Ce-test, Qualified testing ==
Consultants in EMC, Electrical safety and Telecommunication
Compliance tests for European standards and ce-marking
Member of NEC/IEC voting committee for EMC.
Our Web presence:
Pryor:
As of the latest TUV Product Service list of approved Safety Components and
Safety Controllers, EE controls do not have any approved devices with us.
However , we are one certification body within the EU and you must check
with EE controls to find out if they are approved and who they
A client uses PONZ-1 relays in a safety circuit for packaging machinery.
This circuit has been approved by US EU agencies. He would like to change to
EE Controls positive guided relays. The circuit would be re-evaluated with the
EE Controls type SH04 positive guided relays. His
Hello group,
I have a vendor that wants to sell us line cords for use in Europe. There
are several agency marks on the cordage, but no HAR. The plugs have
several agency approvals.
Does anyone know the legal requirement for marking the cordage.
I have seen references to HD-21 and HD-22, but do
If your intent is to satisfy the requirements of the EU for CE marking,
then your report should refer to the performance criteria specified in
EN 50082-1 (or a product specific standard as applicable).
If your intent is only to do 'diagnostic' tests in accordance with a
basic standard, then you
Greetings to all,
My questions concerns differences in performance criteria definitions
during immunity testing.
Example:
EN 50082-1: 1992 defines 3 performance criteria (A, B and C) in section
6 while, for instance, IEC 801-4: 1988 defines 4 performance criteria
(1, 2, 3 and 4) in section
Hello all,
I have just received a reply from the Secretary of the IECEE (CB Scheme)
which confirms that Russia is still very much a part of the CB Scheme.
Keijo Wegelius's reply follows:
Regards, Art Michael, Editor
* * * * * * * * * * * * * * * * * * * * * *
It has been my philosophy is such cases, that a 3 meter length should be
provided.
During radiated emissions and immunity tests, a minimum of 1 meter
should be exposed. In the case of immunity, the 1 meter should be in the
'uniform' field area (even if you are not requiring the field uniformity
Is anyone familar with the Safety and EMC requirements or have contact
information for the following countries?
Yes.
Your help is appreciated.
No problem.
Egon :-)
Hallow !
Recently, I read post subject about Leakage Current Test limitation
on the virtual conference hall in the RCIC.
By the way, I have some unsolved question about leakage current limitation.
According to IEC335-1, leakage current is something different.
For Class 0, / 01/ III
help
__
Get Your Private, Free Email at http://www.hotmail.com
Hallow !
Recently, I read post subject about Leakage Current Test limitation on
the virtual
conference hall in the RCIC.
By the way, I have some unsolved question about leakage current
limitation.
According to IEC335-1, leakage current is something different.
For Class 0, / 01/ III
Hi All,
Is anyone familar with the Safety and EMC requirements or have contact
information for the following countries?
Indonesia
Taiwan
China
Mexico
Your help is appreciated.
Sincerely
Frank F. Goto
A-pex International Co., Ltd.
1st Engineering Department
248-1 Kusube-cho
Ise-shi, Mie-ke
Thanks for all responses both on and off-line.
Some very funny, but all very informative.
Greetings,
Our equipment operates with cables that vary from two feet to two
hundred feet in length. The length is dependent upon the customer's
needs. Some cables are provided by the customer for their applications.
We test our equipment to industrial environment using EN50081 and 50082.
15 matches
Mail list logo