In a message dated 8/29/01, Andy White writes:
When does an Ethernet interface require JATE approval? Is the approval only
reqd. when connected to a Leased Line? or does it apply when connected to a
local building ethernet network?
Hi Andy:
Ethernet is not a service offering on the
I read in !emc-pstc that Ron r...@vascor.com wrote (in 00d501c1309e$f4
81d540$21df7...@vascor.com) about 'Medical application-Isolation
voltage', on Wed, 29 Aug 2001:
I have a medical application that requires double insulation from the
Mains to an applied part according to IEC60601. IEC60601
Hi Bill et al
If you scroll past the message and look at the last line of the This
message is from the IEEE EMC Society Product Safety Technical Committee
emc-pstc discussion list.PSTC header on every e-mail posting--you will
see the following!
All emc-pstc postings are archived and searchable
Hello Ron,
RCIC.com, also known as cfont.com, also known as CliteHouse.com, have
gone away as they say in the UK. It was shut down at the beginning of
August. I believe plans are underway to move the archives to the
redesigned PSTC webpages - due soon.
And, this would be a good time to
I tried too. Response was: Web Site not responding and the advice that it
was down (AOL response).
Thurman J. (Bill) Ritenour
EMC Compliance LLC
4575 Sioux Drive #303
Boulder, CO 80303
303-543-7404
emccom...@aol.com
---
This message is from the IEEE EMC
I have a medical application that requires double insulation from the
Mains to an applied part according to IEC60601. IEC60601 states that for
a reference voltage of 250v and double insulation, the test voltage is 4000v
for 1 min. I am assuming that the voltages are RMS values.
How does one go
I can't access the archives of the EMC-PSTC which is at
http://www.cfont.com/cnf/ .
Any help is appreciated.
Thanks
Ronald Cyprowski
Vascor Inc.
566 Alpha Drive
Pittsburgh PA 15238
412-963-7438 x139
r...@vascor.com
---
This message is from the IEEE
Does anyone know what the requirements for Ethernet (10bT/100bT) certification
and approval are for Japan?
When does an Ethernet interface require JATE approval? Is the approval only
reqd. when connected to a Leased Line? or does it apply when connected to a
local building ethernet network?
Have you lookd at HASS at all ? (Highly Accelerated Stress Screening).
HASS involves subjecting your product to simulatneous extremes of
temperature and vibration. The stress screen is developed following a HALT
(Highly Accelerated Life Testing). Proponents of HALT/HASS claim to have
realised
Geoff,
I have had further thoughts on the headset immunity testing:
The requirements of an artificial hand on a telephone handset is to simulate
a human hand on the handset, normally within a handset there are 2 wires
being fed through the handset to the earpiece which would be enveloped in
At 11:26 AM 8/28/01 -0700, you wrote:
In the ETSI server there is a FAQ about the standard on mechanics see
http://www.etsi.org/ee/QA.htm
Ciao
Paolo
Does anyone have a feel for how close the spacing requirements in ETS 300
119 have to be met? There doesn't seem to be any tolerances, mins or
To all interested parties
(especially those who could not get
to Montreal!!)
The Rocky Mountain Chapter (RMC) of the Institute of Electrical and Electronic
Engineers (IEEE) Electromagnetic Compatibility (EMC) Society will hold its 11th
annual Regional EMC Symposium on Wednesday, October 3rd,
12 matches
Mail list logo