The IEC just announced the PRV (FDIS) of IEC 62911 "Audio, video and
information technology equipment - Routine electrical safety testing in
production" (see link below).
https://webstore.iec.ch/publication/23531_source=JustPublished_medium=email_content=2015-10_campaign=Monthly+email+for+JP
Hi Ron,
I'm not sure how it will be handled specifically. I took a closer look at what
was published in the OJ and the only routine tests published are EN 50106 for
products under IEC 60335. EN 50514 (which superseded EN 50116) has not been
published in the OJ.
My experience has been that the
The most concise information I have found is available at
http://members.iecee.org/iecee/ieceemembers.nsf/ACRFList?readform. Select your
country, scheme and certification body and download their response which will
advise of the regulatory requirements and whether they will accept your CB
Hi Ron:
5.4.9.2, IEC 62368-1, is for routine electric
strength testing of solid insulation (there is no
routine electric strength test for clearances or
creepage distances - as if they can be separated).
The routine test voltage is 10% less than the type
test voltage. For 250-volt
Hi Folks,
Let me or Steve Koster (ste...@wll.com) know if you have any interest in two
lab test positions in Maryland.
http://wll.com/us/jobs/
Best regards,
Mike
Mike Violette
American Certification Body
mi...@acbcert.com
+1 240 401 1388
-
Hi Ted et al,
Thanks for your reply.
Please note that the observation of not including communication equipment was
merely that.
Also in the 5.4.9.2 Note of IEC 62368-1, there is a reference to routine tests
in production. I'm wondering if IEC 62911 would then become a basic standard of
sorts
The scope states the following.
This International Standard defines routine electrical safety test procedures
for use during or after manufacturing of complete equipment, sub-assemblies or
components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by
an a.c. mains supply or
All,
Now that we've all had some time to use the Third Edition of 61010-1, I
wonder what are the typical responses to section 17?
What I usually see are companies using their in-house FMEA/FMECA process to
satisfy the requirement of this section. Presumably, with a view to
product safety, a
Dear folks,
I am looking for some feedback regarding getting a test date at SDPPI lab in
Indonesia.
our in-country agent has been telling me that SDPPI lab is booked fr past 3
weeks and cannot get test date.
Any help, if you have first hand knowledge dealing with this issue recently is
List members,
I have water treatment process control equipment that needs to get into
Dubai, which I believe is part of UAE? I've learned that there is a
Certificate of Conformity (CoC) issuance for Low Voltage Equipment (LVE),
but I cannot find what is within the scope of that LVE. Does
Dear Members,
I am curious to learn the acceptance (value) of CB EMC test reports and
certificates by the (government) regulatory agencies.
Is there any regulatory agencies accept CB EMC test reports and
certificates (without additional evaluation and testing)? Countries
interested are China,
Hi Grace,
I would say that the best way would be to check the regulatory website of
the agencies of these countries for the correct information. I do not have
all the details but sharing whatever I readily know.
- *Japan* - Check the Voluntary Control Council for Interference website
at
12 matches
Mail list logo
