Re: [PSES] Schuko CEE 7/7 Plugs for Appliances Sold in Italy?

You can look at: https://www.power-plugs-sockets.com/ or Power plug and outlet check when traveling abroad | World-Power-Plugs.com Otherwise, call the Italian Embassy in Washington, D.C. Best regards, Ron Wellman From: MIKE SHERMAN Sent:

Re: [PSES] Schuko CEE 7/7 Plugs for Appliances Sold in Italy?

See: https://www.worldstandards.eu/electricity/plug-voltage-by-country/ https://www.iec.ch/world-plugs The US Dept of Commerce used to annually publish a book with all the world plugs, but I can’t find it. Stay safe, and best regards, Rich From: MIKE SHERMAN Sent: Thurs

[PSES] Schuko CEE 7/7 Plugs for Appliances Sold in Italy?

Is it legal to appliances in Italy that have Schuko CEE 7/7 plugs? All my Wikipedia research says that this is common. Is there a government regulatory body that can answer this? I could not find an answer on the mise.gov.it website, or a contact to ask. Thanks! Mike Sherman Graco Inc. - ---

Re: [PSES] EMC/EMI Cables

Cass, I have purchased HDMI Ultra series from Extron and they are great cables. Try www.extron.com Good luckPeter -Original Message- From: Cass Carmanico <14a63c67e767-dmarc-requ...@listserv.ieee.org> To: EMC-PSTC@LISTSERV.IEEE.ORG Sent: Wed, Apr 28, 2021 11:24 am Subject: [PSES] EMC

Re: [PSES] e-Labeling

Sorry Peter for the late reply. I was not well. The product is ITE and it will go under LVD and it will be tested to IEC62368-1 The product does have an display. ThanksPeter -Original Message- From: Pete Perkins <0061f3f32d0c-dmarc-requ...@listserv.ieee.org> To: EMC-PSTC@LISTSERV.IEEE

Re: [PSES] EMC/EMI Cables - Don't cut yourself

"Pretty Similar" story from about 8 yrs ago when working as a contractor for a UK division of a very large Oil & Gas instrumentation contractor: The DUT consisted of a surface control & interface unit and a "downhole" (i.e. goes down inside the metal casing of a oil well extraction pipe) mea

Re: [PSES] EMC/EMI Cables - Don't cut yourself

Sorry, too late. A few years back I cut myself on copper quilted foil. Hurts like the dickens. -Doug Douglas E Powell Laporte, Colorado USA doug...@gmail.com http://www.linkedin.com/in/dougp01 On Thu, Apr 29, 2021 at 11:09 AM David Garnier wrote: > Story. > > This happened 20+ years ago so

[PSES] EMC/EMI Cables - Don't cut yourself

Story. This happened 20+ years ago so don't shoot me. An outside vendor was supplying the Operator Interface Console for our new Ultrasound machine. This console was a slick EMC design, each of the 11 or more rotary encoders that used low power CPU's that went to sleep after rotation. I was told

Re: [PSES] EMC/EMI Cables

Hi, Cass— If your company’s PCB inspection team uses x-ray equipment ask if they will take a few pictures for you. Dissecting suspect cables is certainly valuable and often essential, but you can also learn quite a lot about which shielded cables are “good” or “bad”, not really shielded at all

Re: [PSES] EMC/EMI Cables

I haven’t dissected an HDMI cable in a couple of years, but the HDMI Adopters consortium calls out lower EMI for 2.1-compliant cables: https://www.hdmi.org/spec21sub/ultrahighspeedcable Any cable labeled as 2.1-compliant should still be dissected. Cheers, Adam in Atlanta adam.di...@ieee.org On

Re: [PSES] EMC/EMI Cables

There is a company called Sewelldirect that used to provide a well shielded HDMI cable. They had a webpage on the subject. However, I can't find it on their website anymore. Apple sell a properly shielded HDMI cable. BR John McAuley From: Ken Wyatt Sent: 29 April 2021 15:54 To: EMC-PSTC@LIST

Re: [PSES] EMC/EMI Cables

The only sure way to qualify an HDMI cable manufacturer is to dissect the connector - cable termination and check for pigtails. https://interferencetechnology.com/hdmi-cables-emi/ The article references some original investigations by Begey