Re: [PSES] IEEE Elections and Constitution

Voted “No” as well. Bill Lawrence From: Richard Nute [mailto:ri...@ieee.org] Sent: Wednesday, September 14, 2016 4:41 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] IEEE Elections and Constitution I have already voted “no” for the amendment. The proposed amendment

Re: [PSES] slightly off target but NEMA 4

The NEMA 4 test is about 5 psi. The IPX6 test is about three times that pressure. Less flow but higher pressure. In my opinion, a more severe test. Sent from Bill Lawrence's iPhone > On Jun 10, 2016, at 1:48 PM, Gary McInturff > wrote: > > Hey Don, > Thank you

RE: Hazardous Area Designations/Certifications

/research_standard_testing/product_certification/s296 .html for an explanatory poster comparing US, EN, and IEC standards in this area. Bill Lawrence Senior Engineering Specialist, Hazardous Locations FM Approvals, an FMGlobal Enterprise 1151 Bos-Prov Tpke Norwood, MA 02062 781-255-4822 william.lawre...@fmglobal.com

RE: Potentially Explosive Atmospheres

a different domain while travelling.) Bill Lawrence Senior Engineer Hazardous Locations Electrical Group Approvals Division Factory Mutual Research 781-255-4822 william.lawre...@fmglobal.com

RE: certification mark identification

It is associated with electrical equipment for explosive atmospheres in Europe. It is called for in both the old approach (76/117/EEC) and new approach (94/9/EC) directives. http://europa.eu.int/comm/enterprise/atex/ Bill Lawrence Factory Mutual Research -Original Message- From: owner

RE: 2 Phases in North America

a special Scott-T transformer connection. The correct designation for the 120/240 power system described is Single Phase / 3 Wire. Bill Lawrence -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Wagner, John P (John) Sent

Re: Dust and Water Tightness

of protection provided by enclosures (IP Code) Bill Lawrence, Factory Mutual Research At 07:35 11/02/2000 -0500, Maxwell, Chris wrote: All, I am trying to compile a comprehensive list of standards that we can reference with regards to specifying how water tight and how dust tight a product

Conduit entry dimensions

1.719 / 1.766 A source of the data is NEMA ICS 6. Bill Lawrence - Factory Mutual Research At 09:06 10/07/1999 -0400, Lacey,Scott wrote: Jim, I took a few quick measurements of workboxes, isolation transformers, etc. in the lab, as well as the knockout

Re: Fw: EN 50021 and the EX Mark

frequently used was BS 6941:1988. Under ATEX, this is no longer true as the directive applies to Zone 0, 1, and 2 hazardous areas. Certification is not required for Zone 2 apparatus, self declaration may be used. If you have any further questions, please contact me privately. Bill Lawrence Factory

Position Openings

francis.mcgo...@factory-mutual.com Bill Lawrence South Yarmouth, MA 02664 wlawr...@capecod.net

Re: IEC Spray Nozzle

records to get you one. Bill Lawrence - Factory Mutual At 11:17 1/22/98 -0800, Darrell Locke (MSMail) wrote: Can anyone tell where where I can find a reasonably priced IEC Spray Nozzle as specified in figure 5 of IEC 529? Thanks in advance Darrell Locke Advanced Input Devices Bill

Jurisdiction over Electrical Equipment in a Sewer

as the pipeline is not a 'workplace' potentially visited by humans. A person will not fit in a pipe, therefore it is not a 'workplace'. This seems to me to be a somewhat shortsighted approach, although it may be such due to the limitations of the OSHA legislation. Bill Lawrence South Yarmouth, MA 02664

Re: intrinsic safety requirements

Midcom, Inc. Homologations Engineer Phone: (605) 882-8535 mpeder...@midcom.anza.com Fax:(605) 886-6752 Bill Lawrence South Yarmouth, MA 02664 wlawr...@capecod.net

Intrinsic Safety

. If you want to discuss this please call me on (617) 255 4847, and I can give you some more information. Best Regards Nick Ludlam - Factory Mutual Bill Lawrence South Yarmouth, MA 02664 wlawr...@capecod.net

Re: IEC 529 Hosedown Test

our IPX3 / IPX4 spray test fixture from them. They are probably also available from Friborg in Sweden although I am not sure. Bill Lawrence, Factory Mutual Views expressed are personal, not corporate. At 07:50 3/21/97 -0500, you wrote: Does anyone know where to obtain equipment for doing IEC

Positions for Product Safety Engineers

. These are exempt positions and the starting salary depends on the selected individual's experience and qualifications. Additional information may be obtained from: Bill Lawrence, Senior Engineer - Electrical Section Factory Mutual Research Corporation Tel: 617-255-4822 FAX: 617-762-9375 Internet: fmsysnet/g