There is a company called Sewelldirect that used to provide a well shielded
HDMI cable. They had a webpage on the subject. However, I can't find it on
their website anymore.
Apple sell a properly shielded HDMI cable.
BR
John McAuley
From: Ken Wyatt
Sent: 29 April 2021 15:54
To: EMC-PSTC
Hi Derek
Did you manage to obtain a NSG600 manual? I have a paper copy if you still need
it.
John McAuley
CEI
-Original Message-
From: DEREK WALTON <00734758d943-dmarc-requ...@ieee.org>
Sent: 27 December 2018 21:23
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] NSG600 Manual
Hi Scott
Ireland uses the same plug as the UK as per I.S. 401:1997 - Safety Requirements
For Rewireable And Non-rewireable 13A Fused Plugs.
IS 401 is the equivalent of BS 1363.
Interesting issue about plugs being able to be inserted upside down in some
extension sockets.
John
Hi
Can anyone suggest a US based antenna calibration facility that provides ISO
17025 accredited calibration to ANSI 63.5. A Google search doesn't point to
obvious suppliers.
They must be accredited to ISO 17025.
Thanks in advance
John McAuley
@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Correlation between Radiated Fields and Induced currents
IEC 61000-4-6 might be of some help.
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk <http://www.woodjohn.uk>
Rayleigh, Essex UK
On 2018-01-11 13:23, John M
.
Can anyone point me to a standard or other reference that examines the subject?
I remember there was an assumption that 3 Vrms conducted immunity level was
supposed to correlate to a radiofrequency field of 3 V/m and this was disputed!
Thanks in advance
John McAuley
The difference between dB(pT) and dB(µA/m) is 2 dB.
dB(pT) -2 = dB(µA/m)
-Original Message-
From: Cortland Richmond [mailto:k...@earthlink.net]
Sent: 27 February 2017 16:45
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] CORRECTION (wrong page) Passive Loop Emissions [General Use]
Hi All
Can anyone recommend a repair shop for an Agilent E8358A 9 GHz Network
Analyzer? In Europe or the US.
Apparently it is outside their supported equipment at this stage. It has an
intermittent fault.
Many thanks in advance.
Best Regards
John
John McAuley
Compliance Engineering
into vehicles applies to his product.
Has anyone any experience of derogations in this respect?
Thanks
John McAuley
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail
I have seen significant interference on magnetic pickups in a recording studio
from a DC tram. The problem is the significant harmonics from the 12 pulse
rectifiers which fall in the audio band. Is that what you are using for the
calculation?
Best Regards
John
John McAuley
www.cei.ie
.
BTW, has a new word, Provoqium, been invented? I can't find it in any
dictionary. Comes up as a variation of provoke.
Best regards
John McAuley
*
DISCLAIMER: The information contained in this e-mail may be confidential
Hi Andrew
Providing the protective earth is the same on the two UPSs then there should
be no issue.
The purpose of an A and B supply to ensure security of supply and they have
to be run off separate supplies.
Best regards
John
www.cei.ie http://www.cei.ie/
www.fms-corp.com
and was also free from contact noise.
John McAuley
Sent from my iPhone
On 3 May 2012, at 19:37, Macy m...@basicisp.net wrote:
EMI considerations: emanations relate to amount of energy available, little
energy = little emanations
1. voltage surges are usually 'shielded' by metal structures
is to look at manufacturers environmental specifications
and the EU EMF Recommendation 1999/519/EC is also a useful reference.
Best Regards
John McAuley
DISCLAIMER: The information contained in this e-mail may be confidential and
is intended solely for the use of the named addressee. Access
Helge
If you go to www.cenelec.eu and put 50527 in the Database search window you
will find it.
Best regards
John McAuley
*
DISCLAIMER: The information contained in this e-mail may be confidential and
is intended solely
.
By careful use of input attenuation and observing the results, a traditional
skill used by users of spectrum analysers may help?
BR
John McAuley
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Jim Eichner
Sent: 02 December 2008 08:03
To: emc-p...@ieee.org
Subject: RE: EMI Receiver
guessing that the ESL will work fine perhaps with the HP filter and
pulse limiter. However, it would be a good idea to keep a fully compliant
receiver to hand as a check. I would be interested in comments.
John McAuley
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Jim Eichner
Ravinder
1 Gauss = 1000 mGauss = 100 microTesla = 79.6 A/m
John McAuley
www.cei.ie
john.mcau...@cei.ie mailto:john.mcau...@cei.ie
*
DISCLAIMER: The information contained in this e-mail may be confidential and
is intended
Gail
See this link http://ec.europa.eu/consumers/dyna/rapex/rapex_archives_en.cfm
regards
John McAuley
www.cei.ie
john.mcau...@cei.ie
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended
with some of these though, they use laser trimming
which results in affine line across the resistor that causes arcing. I
understand that the one listed above does not use laser trimming.
BR
John McAuley
www.cei.ie http://www.cei.ie
john.mcau...@cei.ie mailto:john.mcau...@cei.ie
of
emissions from these is the door. A new oven would help. If the door is in
anyway loose they leak quite heavily.
Shielding around the door would help.
John McAuley
www.cei.ie
john.mcau...@cei.ie
*
DISCLAIMER: The information
from military test labs that have experience of
testing immunity of equipment to pulsed fields up to 18 GHz. How frequently do
conventional circuits fail high level EMI testing?
Many thanks for any information provided.
Best regards
John McAuley
Compliance Engineering Ireland Ltd
EN 50178,
prepared by the
CENELEC Task Force BTTF 60-1: Assembly of electronic equipment.
John McAuley
www.cei.ie
john.mcau...@cei.ie
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely
John
I fully support your points. However, 100 mG by my calculation is 10 µT, which
is even less of an increase relative to 1800 µT.
I would like to find the reference to the paper that investigates 100 mG
exposure for one year.
John McAuley
Compliance Engineering Ireland Ltd
John
10 microtesla is correct. My micro did not survive in the ether.
Another question - what is the effect of travelling through the earths
magnetic field (~50 microTesla) at speed? It is not static anymore.
John McAuley
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John
that stayed with Chase that repaired the units.
Regards
John McAuley
www.cei.ie
john.mcau...@cei.ie
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee
26 matches
Mail list logo