Hello All,
I am searching for a facility that can conduct the cord flexing test in
accordance with IEC60227-2. Any leads that anyone can give me are greatly
appreciated.
Regards,
Ken
_
MSN Photos is the easiest way to share
I think the answer to the problem exists. The 2002 version of the National
Electric Code will require Arc Fault Interrupters in bedrooms.
See the link below from the CPSC for details.
http://www.cpsc.gov/cpscpub/pubs/afci.html
From: Colgan, Chris chris.col...@tagmclaren.com
Reply-To:
It sounds like Mike is looking for a power supply to provide power to test
electrical devices (not a power supply to be installed in a product).
I Interpret Mikes E-mail to be:
The power supply should be able to supply 50-60Hz (when connected to a 60Hz
supply, 3 phase supply (likely
Thanks guys...BUT, I am not trying to convince UL that I am correct. This is
all internal to the company I am working with.
Just to give you an idea of how confusing this issue is, I have privately
received responses stating that all the following are acceptable:
Kerosene
Isopropyl
Recently, I was asked to show that the hexane that I was using for UL1950
and related standards (Marking durability test of 1.7.15) infact complied
with the requirements in the standard, Specifically:
The petroleum spirit to be used for the test is aliphatic solvent
hexane having a maximum
I am working with a client who has posed a question that I am not sure that
I can accurately answer.
What are the NRTLs (and for that matter, other test laboratories) requiring
for Laser Certifications. Annex NAE of UL1950/CSA C22.2 No 950 is an
INFORMATIVE annex(and mentions the regultory
I am glad that I was able to assist in allowing Rich to earn his keep. I
received several responses both public and privately...most said the same
thing, it is a difficult test to conduct and comply with. Many thanks to
those that responded, your advice and expertise have given me several
I have been asked by one of our mechanical engineers to look into conducting
the Hot Flaming oil test of IEC60950 based standards (reference to Annex
A.5) Has anyone had experience with this test especially in conducting or
witnessing the test (first hand experience)?
The standards specify
I also agree that the headphones are a patient connection.
Hi,
Its been a while since I looked at UL 544, but a few comments.
1. Headphones are an applied part (UL2601-1) or patient connection
(UL544). They come into direct contact with the patient. You can argue
that they are an
9 matches
Mail list logo