Please respond to Kamran Mohajer kmoha...@cisco.com
To: emc-p...@ieee.org
cc:(bcc: Kim Boll Jensen/INT)
Subject: Temperature Measuring of Magnetic Components
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature limits on
magnetic components. I happen
that the readings are inconsistant, only
measure it one time! (Joking)
Kamran Mohajer wrote:
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature limits on
magnetic components. I happen to get involved in this and found that my
results are different than the vendors result
.
Regards
Barry Esmore
AUS-TICK
Phone: + 61 3 9886 1345
Fax: + 61 3 9884 7272
Email: bar...@melbpc.org.au
- Original Message -
From: Kamran Mohajer kmoha...@cisco.com
To: emc-p...@ieee.org
Sent: Wednesday, August 25, 1999 7:50 AM
Subject: Temperature Measuring of Magnetic Components
Hello
. 316 636 8657
Fax 316 636 8889
Fax 316 636 8315
-Original Message-
From: Kamran Mohajer [SMTP:kmoha...@cisco.com]
Sent: Tuesday, August 24, 1999 4:50 PM
To: emc-p...@ieee.org
Subject:Temperature Measuring of Magnetic Components
Dear Kamran,
Obtaining a temperature test results that is 10-15 degrees higher or lower
than your vendor is not unusual at all. We experience this all the time
with major test houses. I have had many cases where an experience test
engineer in a test house measures as much as 20 degrees lower or
the manufacturer of the
thermocouple I was using. They could not tell me how much my reading would
change but recommended taking the reading with power off.
Hope this helps.
Regards,
Fred Waechter
Kamran Mohajer wrote:
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature
: (860) 344-1651
Fax: (860) 346-9066
Email : i...@connix.com
Website: http://www.safetylink.com
ISSN : 1040-7529
-
On Tue, 24 Aug 1999, Kamran
Mohajer wrote:
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature limits
[SMTP:kmoha...@cisco.com]
Sent: Tuesday, August 24, 1999 5:50 PM
To: emc-p...@ieee.org
Subject:Temperature Measuring of Magnetic Components
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature
limits on magnetic
Mohajer [SMTP:kmoha...@cisco.com]
Sent: Tuesday, August 24, 1999 5:50 PM
To: emc-p...@ieee.org
Subject:Temperature Measuring of Magnetic Components
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature
limits
Hello EMC-PSTCers,
I wonder if anyone knows of the method of measuring temperature limits on
magnetic components. I happen to get involved in this and found that my
results are different than the vendors result by as much as 10-15 degrees on
measuring on a same magnetic component. Even
10 matches
Mail list logo
