Which edition of CISPR22 is the current VCCI-3 (Emissions) equivalent to?
I know that VCCI-3 has added the telecommunications port conducted emissions
test requirement and the 1-6GHz radiated emissions test requirement, so it
must be equivalent to at least CISPR22:2005+A1:2005. However
On Wed, 22 Jul 2009 13:53:17 EDT,
emcp...@aol.com wrote:
I have a question on the VCCI market sampling requests from VCCI.
A company has received a request for VCCI to send their product to Japan an
d they will test it to verify it meets the requirements. The company never
did sell
Hi Group,
I have a question on the VCCI market sampling requests from VCCI.
A company has received a request for VCCI to send their product to Japan and
they will test it to verify it meets the requirements. The company never did
sell this product to Japan and they never plan to. They just
Dear Members,
We are trying to emboss the VCCI logo in the plastic casing of an
ITE product and we need VCCI logo in dxf format. From the VCCI official
website we are able to get the eps jpg format only but we are not able to
create the logos properly with these files. May I request
...@scmmicro.co.in wrote:
Dear Members,
We are trying to emboss the VCCI logo in the plastic casing of an
ITE product and we need VCCI logo in dxf format. From the VCCI official
website we are able to get the eps jpg format only but we are not able to
create the logos properly
Hi Folks,
Can anyone tell me why we don't see VCCI logo on many AC/DC adapters on the
market?
Thanks
Pete
Plan your next roadtrip with MapQuest.com
http://www.mapquest.com/?ncid=mpqmap000304 : America's #1 Mapping
Site
Pete,
VCCI is voluntary and it applies to ITE equipment as a system, not power
adaptors. AC/DC power adaptors are covered under the Denan law and must meet
RFI (emissisions only) and safety and be marked with the PSE Mark.
Peter
peterh...@aol.com wrote:
Hi Folks,
Can
Can you apply a VCCI mark to your product as a Rank D supporting member of
VCCI?
Thanks,
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc
2007 11:17 AM
To: 'Alex Horvath'
Cc: emc-p...@ieee.org
Subject: RE: Test report requirements for C-Tick, VCCI, etc. certification
Alex,
For Australia, emissions testing to ITE products needs to be performed against
AZ/NZS CISPR 22 (Australian New Zealand national standard), which means
by the ACMA, but a valid SDofC can only be
completed by a registered company in Australia.
As for VCCI, to claim VCCI compliance, your company must first become a VCCI
member. Otherwise, VCCI compliance cannot be claimed, but I believe EMC
compliance in Japan to be voluntary otherwise.
And, see
these are still requirements
(someone on the list please verify that). Please note that C-tick approval is
a self-declaration scheme managed by the ACMA, but a valid SDofC can only be
completed by a registered company in Australia.
As for VCCI, to claim VCCI compliance, your company must first
Hi,
I work for an equipment manufacturer. Initially, we had a product tested to
FCC Part 15 and EN55022, EN55024. Subsequently we needed C-Tick and VCCI
certification. The test lab told me that the original test report is all that
is needed, the only additional step is registration (we have
1.
The response I received from VCCI is below, which also clarifies the
implementation of the telecom port conducted testing requirement.
Best regards,
Bill stumpf
DLS Electronic Systems, Inc.
262-279-0210
Dear Bill Stumpf,
I'm Jiro Kawano, Technical Manager.
It is surely misunderstanding
this clarifies your confusion.
Grace
On 6/5/07, Bill Stumpf bstu...@dlsemc.com wrote:
Dear group,
I had a question as to the meaning of upper in V-3/2007.04 clause 1.
The response I received from VCCI is below, which also clarifies the
implementation of the telecom port conducted testing
Dear group,
I had a question as to the meaning of upper in V-3/2007.04 clause 1.
The response I received from VCCI is below, which also clarifies the
implementation of the telecom port conducted testing requirement.
Best regards,
Bill stumpf
DLS Electronic Systems, Inc.
262-279-0210
Dear Bill
On Fri, 1 Jun 2007 16:24:55 EDT,
emcp...@aol.com wrote:
Does anyone know when Japan (VCCI) will require telecom port conducted
emission testing for Ethernet ports on ITE? I believe VCCI and FCC are
supposed to
adopt the new CISPR standards.
Yes, VCCI already adopted CISPR 22:2005
Hi All,
Does anyone know when Japan (VCCI) will require telecom port conducted
emission testing for Ethernet ports on ITE? I believe VCCI and FCC are
supposed to adopt the new CISPR standards.
Thanks,
Tim Pierce
_
See what's free at AOL.com http://www.aol.com?ncid
Hi Eric,
You may wish to contact Jiro Kawano (kaw...@vcci.or.jp), the VCCI technical
manager, for clarification.
If you haven't received a clarification by the time the 2006 IEEE Symposium on
EMC held in the coming August, you may have a chance to talk to the person who
reviews VCCI site
Dear Peers,
Summary: Has anyone an authoritative and current word on the state of
the NVLAP/VCCI MOU/MRA?
In early March 2006 a VCCI person informed me that a MOU with NVLAP was
to be in place by the end of that month. Indeed, the subsequent annual
April update of the VCCI regulations showed
Derek:
If the Lab is asking you what the procedure is for obtaining VCCI
accreditation,
I suggest you find another lab.
However, for information on becoming a member and an accredited laboratory,
go to http://www.vcci.or.jp/vcci_e/index.html and all the information is in
the upper left
On Mon, 10 Apr 2006 23:54:43 -0500,
Derek Walton lfresea...@aol.com wrote:
I have been asked by a lab what the procedure is to gain VCCI approval
for the testing they perform.
Can anyone outline the process please
Send completed application to VCCI and register the test
facilities
Good morning all,
I have been asked by a lab what the procedure is to gain VCCI approval for the
testing they perform.
Can anyone outline the process please
--
Cheers,
Derek Walton
L F Research
Poplar Grove, IL 61065, USA
://www.herberg-sp.de
djumbdenst...@tycoint.com
Gesendet von: emc-p...@ieee.org
05.10.2005 18:25
An
emc-p...@ieee.org
Kopie
Thema
VCCI testing above 1 GHz
With the change in CISPR 22, anyone know how testing above 1 GHz is being
addressed in Japan today?
Don Umbdenstock
Manager
With the change in CISPR 22, anyone know how testing above 1 GHz is being
addressed in Japan today?
Don Umbdenstock
Manager Compliance Engineering
Tyco Safety Products / Sensormatic
6600 Congress Avenue
Boca Raton, FL 33487 USA
561.912.6440
djumbdenst...@tycoint.com
From: Pettit, Ghery
Duncan Hobbs duncan_ho...@xyratex.com wrote (in
daa86e35a29ef84292f56943906cbdbc02562...@xy01ex01.xy01.xyratex.com)
about 'VCCI cost', on Thu, 11 Aug 2005:
As you can imagine, getting a 205,000 Yen bill signed off involved some
explaination of the exchange rates!
Good job it wasn't in Turkish
Gary and group,
I was asked not so long ago to raise a purchase order for our membership of
VCCI
The fee we paid is 205,000 JPY (Japanese yen) which equates to about £1000 or
$2000. As I seem to remember they insist that it is paid in japanese yen.
As you can imagine, getting a 205,000 Yen
(E-mail)
Subject: VCCI cost
Anybody have the current manufacturers (not test house fee’s) for VCCI
membership – small company. I’m remembering $2k or something of that
nature. Large companies pay more – theoretically based on the number of test
reports submitted.
Thanks
Gary
Anybody have the current manufacturers (not test house fee’s) for VCCI
membership – small company. I’m remembering $2k or something of that
nature. Large companies pay more – theoretically based on the number of test
reports submitted.
Thanks
Gary
Dear Forum members,
We are looking for a lab that can help us in obtaining FCC, CE VCCI
certification for all our digital media readers and smart card readers.
Since we operate from India we prefer labs in near by location. I request
you all to help me in this regard.
Sincerely
Mike et al,
See the exact wording of exempted devices, in particular item (3) as I've
copied for you below.
Amended: April 1, 2002, 15th Edition
15th Edition applied from: April 1, 2002
[...]
Article 3 (Scope of the Implementation)
These regulations shall apply to the ITE, defined in Article
I notice in all of the VCCI documents, that it only refers to ITE. Any
opinions on whether or not it applies to ISM equipment that is operated
through an industrial PC? This would definitely be a Class A device.
Thanks,
Mike
---
This message is from
Gary,
The new URL for the VCCI web site is:
http://www.vcci.or.jp/
Click English, then Member (password-protected,)
then Documents and Forms. Form 1 is the first form
in the table. Click on Word file.
Regards,
Dan
From: Gary McInturff gary.mcintu...@worldwidepackets.com
Does anybody know the link to the VCCI conformity verification
report for 1 (as of April 1, 2001). I have the homepage but this document is
suppose to be downloadable, but darned if I can find it.
Thanks
Gary
---
This message
Here is my understanding. For EMC, Japan has only the VCCI, which
is the Voluntary Council for the Control of Interference. It is optional to
belong, but members must meet the equivalent of CISPR 22.
Until now, AC/DC adapters required safety certification and the use of
the Dentori-T mark
Agree, our company only recently became VCCI registered. The reason, the
company we supply was already a member and required us to demonstrate
compliance.
John Juhasz wrote:
On another note, many companies (both US and Japanese) belong to VCCI.
As a member
of VCCI, they pledge
On another note, many companies (both US and Japanese) belong to VCCI. As a
member
of VCCI, they pledge that the products that they market will be evaluated
for
compliance with the specifications, and be marked as such.
So if you are planning on doing business with a VCCI member, you will be
asked
George,
My understanding is that if anyone in the distribution chain is registered
with the VCCI, then they are obliged to distribute VCCI compliant products.
So you should check you distribution to chain,
mfg.-wholesaler-distributor-customer, to see if any is registered with the
VCCI
VCCI is a voluntary organization in that it is self-policing the ITE
industry, and is not mandatory in a legal sense (you can't be dragged into
court for non-compliance), BUT the Japanese consumers are aware of the mark
and look for it.
On the other side the failure to comply when you have
George
VCCI registration is voluntary. You do not need it to sell in Japan. BUT like
so many other things, the VCCI mark is now seen as a sign of quality and you
may find it hard to sell products in Japan without the mark.
George Stults wrote:
Hi All,
Just a basic question here about VCCI
Hi All,
Just a basic question here about VCCI, hopefully it hasn't been done
recently.
In the acronym VCCI, (Voluntary Control Council for Interference) the first
word is 'Voluntary.'
I have assumed that VCCI is a defacto standard in spite of being called
'Voluntary,'
but I don't know how
There is a pdf version of the form in the guest center on our web site at
www.curtis-straus.com
-Jon Curtis.
Jim Bacher wrote:
forwarding for : bgilmar...@cereva.com
Reply Separator
Subject:VCCI application
Author: Gilmartin; Bob bgilmar
: Wednesday, September 27, 2000 3:46 PM
To: 'chasgra...@aol.com'; Gary McInturff; jim_bac...@mail.monarch.com;
bgilmar...@cereva.com; emc-p...@ieee.org
Subject: RE: VCCI application Membership required??
Any one can be a member and there are two classes; Member
manufacturers and Member test
...@mail.monarch.com]
Sent: Wednesday, September 27, 2000 2:37 PM
To: Gilmartin; Bob; EMC Newsgroup (E-mail)
Subject: Re:VCCI application
forwarding for : bgilmar...@cereva.com
Reply Separator
Subject:VCCI application
Author: Gilmartin; Bob bgilmar...@cereva.com
Can anyone apply for VCCI registration. I thought
membership was required prior to sending in
an application.
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail
Any one can be a member and there are two classes; Member
manufacturers and Member test facilities. VCCI collects fees from both of
us. From the manufacturer's side the fee's are based upon the anticipated
number of submittals per year. The payment is billed once a year
http://www1a.meshnet.or.jp/vcci/vccie/index.html
I just cleared my disk cache and verified that it is a valid link
Eric Lifsey.
Can someone give me the link for the VCCI web page please?
Doug Frazee
EMC Compliance Engineer
Alliant Techsystems, Inc.
doug_fra...@atk.com
Questions regarding VCCI?
1) Is VCCI for a product ever MANDATORY for it to be imported into Japan?
2) If VCCI is not mandatory, is it mandatory to meet certain emissions
limits for importation into Japan?
3) If VCCI is not mandatory, for what type of products is VCCI most desirable
Here is a brief summary of a public VCCI meeting that was held in Santa
Clara, California on March 17, 1997, which I attended.
Five VCCI officials from Japan made presentaions to the audience
relative to the changes in their VCCI standards that become effective
April 1, 1997. They provided
It s in their AGREEMENT OF VCCI FOR ITE document V-2/96.03..Beware though
- I understand that they are revising this agreement AGAIN - I'll keep you
posted.
Charles Grasso
EMC Engineer
StorageTek
--
From: Arthur Poolton (MEPCD)[SMTP:arth...@apricot.mee.com]
Sent: Friday, April 04
50 matches
Mail list logo