Yes, I have an Agilent 5517D which is a frequency stabilized two
frequency laser that I got on Ebay.
How fast can the counters on the 5I20 count? I would need a pair of
perhaps 32 bit counters that can count at more than 4 MHz and can be
read out simultaneously. (Actually, copied into
On Sun, 2009-12-20 at 10:54 -0500, Kenneth Lerman wrote:
Yes, I have an Agilent 5517D which is a frequency stabilized two
frequency laser that I got on Ebay.
How fast can the counters on the 5I20 count? I would need a pair of
perhaps 32 bit counters that can count at more than 4 MHz and
On Sun, 20 Dec 2009, Kenneth Lerman wrote:
Date: Sun, 20 Dec 2009 10:54:46 -0500
From: Kenneth Lerman kenneth.ler...@se-ltd.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
Peter,
What type of counter do you use that can propagate a carry over 32 bits
in 10 nsec? That's what you need to count at 100 MHz.
Ken
Peter C. Wallace wrote:
On Sun, 20 Dec 2009, Kenneth Lerman wrote:
Date: Sun, 20 Dec 2009 10:54:46 -0500
From: Kenneth Lerman
On Sun, 20 Dec 2009, Kenneth Lerman wrote:
Date: Sun, 20 Dec 2009 13:41:30 -0500
From: Kenneth Lerman kenneth.ler...@se-ltd.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
Mike,
Have a look at this item - this will safely break out your
signals from the parallel port
http://tinyurl.com/yh6j93r
and this will give you enough parallel ports to drive up to
9 motors...
http://tinyurl.com/yzn2b9z
Best wishes,
Ian
___
Ian W. Wright
Sheffield
Hello,
First i will start with my setup. I have a Milltronics partner 4
retrofit that is almost complete minus the servo tuning.
I am using a mesa 5i20 board with 7i33 and 7i37. and AMC 30a8 amplifiers.
My first issue is with the amp tuning, I have them pretty solid, but all
axis move slowly
On Sun, 2009-12-20 at 19:10 -0700, Dustin Monroe wrote:
Hello,
First i will start with my setup. I have a Milltronics partner 4
retrofit that is almost complete minus the servo tuning.
I am using a mesa 5i20 board with 7i33 and 7i37. and AMC 30a8 amplifiers.
My first issue is with the