2010/9/16 Andy Pugh a...@andypugh.fsnet.co.uk
Axis is written in Python (I think) so perhaps this page would help?
http://wwwx.cs.unc.edu/~gb/wp/blog/2007/02/04/python-opencv-wrapper-using-ctypes/http://wwwx.cs.unc.edu/%7Egb/wp/blog/2007/02/04/python-opencv-wrapper-using-ctypes/
I reckon
Out of my knowledge reach. This is job for someone other guy.
Na 17.9.2010 9:22, Sven Wesley je pisal:
2010/9/16 Andy Pugha...@andypugh.fsnet.co.uk
Axis is written in Python (I think) so perhaps this page would help?
Hi All;
Does anyone know where, or if there is a document for these?
The ones not so obvious to me are:
setp ppmc.0.stepgen.00-03.pulse-width-ns 3500
setp ppmc.0.stepgen.00-03.pulse-space-min-ns 3500
setp ppmc.0.stepgen.00-03.setup-time-ns 1000
1- Does this set all the steppers on a board the
Whoops, last message would be
setp ppmc.0.stepgen.04-07.pulse-width-ns 3500
If that hal pin shows up in halshow, then it most likely will
work fine. DIP switch 10 has to be OFF on the 2nd board
and you need the extension cable between boards.
Jon
Don Stanley wrote:
Hi All;
Does anyone know where, or if there is a document for these?
The ones not so obvious to me are:
setp ppmc.0.stepgen.00-03.pulse-width-ns 3500
setp ppmc.0.stepgen.00-03.pulse-space-min-ns 3500
setp ppmc.0.stepgen.00-03.setup-time-ns 1000
1- Does this set all the
On Fri, Sep 17, 2010 at 11:21 AM, Jon Elson el...@pico-systems.com wrote:
Whoops, last message would be
setp ppmc.0.stepgen.04-07.pulse-width-ns 3500
If that hal pin shows up in halshow, then it most likely will
work fine. DIP switch 10 has to be OFF on the 2nd board
and you need the
This same thing just happened to me. Try deleting the emc.var file.
Len
Hi guys,
today I started my machine and EMC2 didn't start automatically as all the
days
(it is in the start-up section) so I tried to launch it manually and I got
the
error ECMC2 is still runnnig. Restart it. So I
Il 17/09/2010 01:29, Andy Pugh ha scritto:
On 15 September 2010 18:24, Spiderdab77...@tiscali.it wrote:
hallo, in my inverted tetrapod i've set the 4 axis as: X Y Z A, in this way:
At the moment that seems to be the only way to get 4 working joints,
even on a 3-axis machine like
Il 17/09/2010 01:29, Andy Pugh ha scritto:
another question:
i can jog directly the first three axis, using arrows and pgup/down. how
can i jog the fourth axis?
You should be able to press the axis letter and use the + and -
keyboard keys or onscreen buttons.
yes this way it
Il 17/09/2010 03:16, BRIAN GLACKIN ha scritto:
Can you describe the motion of your fourth axis? Linear or radial? If
linear, what axis is it parallel to? Ir radial, what axis is its center of
rotation parallel to?
Brian
Brian, any axis is parallel to nothing. they are four linear
Hi All;
I will have to plead the Shultz Defense.
The Mill processors I am converting to EMC2 are
Athlon 64 processor 3700+ or better with the following
slots:
PCI
PCI-EX1
PCI-EX16
MGP (Mach speed graphics port).
I am currently using left over dual monitor video cards
which worked
Don Stanley wrote:
Hi All;
I will have to plead the Shultz Defense.
The Mill processors I am converting to EMC2 are
Athlon 64 processor 3700+ or better with the following
slots:
PCI
PCI-EX1
PCI-EX16
MGP (Mach speed graphics port).
I am currently using left over dual
Don Stanley wrote:
On Fri, Sep 17, 2010 at 11:21 AM, Jon Elson el...@pico-systems.com wrote:
Whoops, last message would be
setp ppmc.0.stepgen.04-07.pulse-width-ns 3500
If that hal pin shows up in halshow, then it most likely will
work fine. DIP switch 10 has to be OFF on the 2nd
13 matches
Mail list logo
