[Emc-users] For Peter C. Wallace

2017-11-11 Thread Gene Heskett
Hi Peter; If I write a hal thing that changes the value pushed into the encoder's scale input, how much of a time lag might there be to make it effective? The scenario is this: I have ordered a 1000 line Omron encoder, which I intend to couple to the rear of the spindle motor shaft, feeding

Re: [Emc-users] Touchegg with LCNC - Linux multitouch gesture recognizer

2017-11-11 Thread bari
We tried LCD models similar to these but replaced the enclosures with something rugged and put the Mesa cards and motor drivers inside. https://www.newegg.com/Product/Product.aspx?Item=9SIA2F81JR8834 On 11/10/2017 10:03 AM, Chris Albertson wrote: > This does not have to be on a touch screen. It

Re: [Emc-users] showstopper on gear change tally.

2017-11-11 Thread Greg Bentzinger via Emc-users
Personally I would like to come up with a simple test cycle to verify that the machine has been manually set in the correct gear without any switches. Having a Bridgeport type machine I can adjust speed manually assuming the machine is in the right High/Low range. Simply command the VFD to

Re: [Emc-users] showstopper on gear change tally.

2017-11-11 Thread Gene Heskett
On Saturday 11 November 2017 12:33:43 Gene Heskett wrote: > On Saturday 11 November 2017 10:33:50 Gene Heskett wrote: > > On Saturday 11 November 2017 05:24:30 andy pugh wrote: > > > On 11 November 2017 at 03:01, Gene Heskett > > > > wrote: > > > > With Andy recommending

Re: [Emc-users] showstopper on gear change tally.

2017-11-11 Thread Gene Heskett
On Saturday 11 November 2017 10:33:50 Gene Heskett wrote: > On Saturday 11 November 2017 05:24:30 andy pugh wrote: > > On 11 November 2017 at 03:01, Gene Heskett > > wrote: > > > With Andy recommending about 10 mills, then I'd need 390 ohm r's > > > for current limiters. >

Re: [Emc-users] showstopper on gear change tally.

2017-11-11 Thread Gene Heskett
On Saturday 11 November 2017 05:24:30 andy pugh wrote: > On 11 November 2017 at 03:01, Gene Heskett wrote: > > With Andy recommending about 10 mills, then I'd need 390 ohm r's for > > current limiters. > > Thinking about this further, are you sure there are no limiters on

[Emc-users] Touchegg with LCNC - Linux multitouch gesture recognizer

2017-11-11 Thread Ken Strauss
Is there a similar quality unit that works with Windows? > -Original Message- > From: Chris Albertson [mailto:albertson.ch...@gmail.com] > Sent: Friday, November 10, 2017 11:04 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Touchegg with LCNC - Linux multitouch

Re: [Emc-users] showstopper on gear change tally.

2017-11-11 Thread andy pugh
On 11 November 2017 at 03:01, Gene Heskett wrote: > With Andy recommending about 10 mills, then I'd need 390 ohm r's for > current limiters. Thinking about this further, are you sure there are no limiters on the BoB? I can't imagine the ebay vendors exposing bare optos to