Hi
Shank diameter 5.9 or 6.2 (near the square, thinner near the thread)
Square size 4.75 to 4.85 mm
But I've had ones with smaller shanks and/or heads.
On 12/9/2021 22:56, johnd wrote:
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my
On Thu, 9 Dec, 2021 at 4:32 PM, johnd wrote:
To: enhanced machine controller (emc)
Hi Gene. Would you measure and post the results please.I bought a very
expensive spiral tap that I expected would meet ISO or DIN standards.
Not!Another I have also doesn't. So I'm curious. Thanks John
Now
December 9, 2021 8:28:26 PM CET andrew beck
wrote:First off I don't think you can change the shank.
I need a more taper 4 centre for my cnc lathe.
If you want to sell it.
I'm also not sure what they are worth. But we could look it up I guess.
On Fri, 10 Dec 2021, 07:39 grumpy via
Hi Gene. Would you measure and post the results please.I bought a very
expensive spiral tap that I expected would meet ISO or DIN standards.
Not!Another I have also doesn't. So I'm curious. Thanks JohnSent from my
Samsung S10
Original message From: Gene Heskett
Date:
On 12/9/21 2:56 PM, johnd wrote:
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
There are a couple of different standards.
Iso
Jis
And a few more
On Fri, 10 Dec 2021, 10:00 johnd, wrote:
> Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank
> and flat dimension?Sent from my Samsung S10
> ___
> Emc-users
On Thu, 9 Dec, 2021 at 3:58 PM, johnd wrote:
To: enhanced machine controller (emc)
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
It will vary John, I have at least 3 of them, and no two are the same size.
Get one and
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
First off I don't think you can change the shank.
I need a more taper 4 centre for my cnc lathe.
If you want to sell it.
I'm also not sure what they are worth. But we could look it up I guess.
On Fri, 10 Dec 2021, 07:39 grumpy via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
>
> I
I bought a pallet of miscellaneous items.
In it there is a Point Tech 4BNL30 live center.
This is a beefy piece of hardware.
My lathe takes a MT3 so I can't use it.
It is in the original box in the original wrapper.
I can't see any sign it was ever used.
Does anyone know what this is worth?
I
10 matches
Mail list logo
