On 12/18/23 14:09, Todd Zuercher wrote:
Probably, but we will need a better explanation of exactly what machine
responses you want to what machine inputs, before we could give a detonate yes
or instructions how to do so.
Are you asking for the machine to automatically home all joints when the
Hi There…I’m hoping to start in the ‘machine on’ state rather than estop on.
After that, yes, I would like to home the axes, then set the mode to MDI and
also set G93. I had not asked anything but the machine state as I thought it
would be better to take it one step at a time…
Thanks very
Probably, but we will need a better explanation of exactly what machine
responses you want to what machine inputs, before we could give a detonate yes
or instructions how to do so.
Are you asking for the machine to automatically home all joints when the
machine power/enable button is pressed?
On 12/18/23 12:04, Alan Thomason via Emc-users wrote:
Hi There…
We have a positioning machine that uses linuxcnc that we want to better
automate the restart procedure. Is it possible to script in the initial file
for the system to switch to Machine ON (as long as there are no active limit
Hi There…
We have a positioning machine that uses linuxcnc that we want to better
automate the restart procedure. Is it possible to script in the initial file
for the system to switch to Machine ON (as long as there are no active limit
switches).
This machine is inaccessible to humans
Someone finally got around to making simple breakout connector boards for the
Pololu stepper driver headers?
Not that it would be difficult to do a design and send it off to PCBway or one
of the other places, it'd just be easier and cheaper for a company or person to
have them made in mass
