On 4/14/24 22:23, Billy via Emc-users wrote:
This is for a 24k 4HP spindle. Using ER32 ISO 30 tool holders. Probably not
going to be using any drill chucks in this thing.
Not to mention at only 4hp, there will be a max drill size it can pull
at the recommended cut rate. And likely a limited
No I wouldn't use drill chucks
On Mon, 15 Apr 2024, 14:25 Billy via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
> This is for a 24k 4HP spindle. Using ER32 ISO 30 tool holders. Probably
> not going to be using any drill chucks in this thing.
>
> > On Apr 14, 2024, at 9:59 PM, gene
This is for a 24k 4HP spindle. Using ER32 ISO 30 tool holders. Probably not
going to be using any drill chucks in this thing.
> On Apr 14, 2024, at 9:59 PM, gene heskett wrote:
>
> On 4/14/24 19:29, John Dammeyer wrote:
>>>
>>> I'm just checking to get recommendations on tool setter
On 4/14/24 19:29, John Dammeyer wrote:
I'm just checking to get recommendations on tool setter placement and
workflow.
Thanks, Billy - aka Connor
Where to put the tool setter is likely where it's easiest for an operator to
also access the tool.
I don't know if the CNC router falls into an
>
> I'm just checking to get recommendations on tool setter placement and
> workflow.
>
> Thanks, Billy - aka Connor
>
Where to put the tool setter is likely where it's easiest for an operator to
also access the tool.
I don't know if the CNC router falls into an operation like changing a
> ...
> I'm also thinking about workflow and speed. If we preset the tooling before
> each job. Is there any reason to be auto
> touching off during tool changes? Only thing I can think of
> is tool breakage.
I measure tool length first and do no auto touch off during tool changes. Can't
Hey Everyone,
I'm just checking to get recommendations on tool setter placement and workflow.
This is for a 5'x10' Avid CNC router. ATC with the Tool Rack in the back.
Operator station front right, and this is for hobby use only (For a Maker
Space, not production)
My original plan was to
