You would need to look into customizing the boot loader. Arch linux
documentation has good Docs on this.
Den 22 maj 2017 6:53 em skrev "Ricardo Moscoloni" :
> Hi folks, maybe a dumb question but!:
> anyone knows how to start LCNC wheezy installation disk in efi mode to
> stand side by side with w
http://gcodes.net
checked here?
On Dec 26, 2016 3:33 AM, "TJoseph Powderly" wrote:
> Nicklas
>
> On 12/25/16 23:30, Nicklas Karlsson wrote:
> > Then trying to figure which g-codes or more precise *-codes in general
> could be useful for EDM I started to write a database of codes for
> different
Is there a working updated rtai kernel for say linuxmint 18, ubuntu 16,
debian jessie yet?
I remember i could run linux mint 17.3 with a 3.4-9 pae build, but that
is broken as well with the latest updates.
The package is still there in the linux repository tho but i only get
kernel panics when
rting in the end Sebastian suggested and fiddle from there.
Thanks for the input tho.
// A
Den 2016-11-29 kl. 17:36, skrev andy pugh:
> On 29 November 2016 at 16:21, Andreas Pettersson wrote:
>
>> thought it could be a challenge of making a webui for a device running
>> li
h't use Java and I have kept away from Java since I do not
> consider it the best of programming languages for several reasons. Secondary
> reason is I have limited amount of time.
>
>
> On Tue, 29 Nov 2016 17:40:29 +0100
> Andreas Pettersson wrote:
>
>> Well, web ui
> need to install software.
>
>
> On Tue, 29 Nov 2016 17:21:49 +0100
> Andreas Pettersson wrote:
>
>> awesome, i gonna take a look at the C++ examples.
>> thought it could be a challenge of making a webui for a device running
>> linuxcnc on a lattepanda or a beaglebo
kl. 16:40, skrev Sebastian Kuzminsky:
> On 11/29/2016 07:34 AM, Andreas Pettersson wrote:
>> Would there be something that limits one to implement a UI for LinuxCNC
>> as a restful service
>> in say Python - that would listen to like port 8080 and take commands like
>>
&
Would there be something that limits one to implement a UI for LinuxCNC
as a restful service
in say Python - that would listen to like port 8080 and take commands like
/moveXAxis/positive/10/mm
Why, cuz i want to. And i guess one could bind a zeromq realtime
component into it or something like
Setting up the 5i25 or 6i25 with a 7i77 is definitly not turnkey unless you
are intimatly familiar with how both hw and sw works.
compared to most windows solution that is up and running within a couple of
hours. tuning and setting up and finding out howto with linuxcnc is a
tremendous pain that t
code.html
>
> Dave Caroline
>
> On 26/07/2015, John Thornton wrote:
>> Just because code is available in other controls doesn't automagicly
>> mean it is included in LinuxCNC. That is an unrealistic expectation...
>>
>> On 7/26/2015 6:29 AM, Andreas Pettersson wrote
It don't seem that LinuxCNC supports M98 and M99 for repetitive tasks..
like cutting slots with a specific distance..
For example..
G91 G21
F30
G1x-4.12
G0x5
M98 P1000 L9
G0x2
G90
G0Z50
M30
o1000
G0Z2.34
G1x-5
G0x5
M99
%
(this would work in Mach3, for making several grooves on a cnc lathe).
-
Well its alot of GPL opensoftware that is funded but still released
under the rules of GPL.
Just take OpenSSL for example - that is funded by microsoft, ibm, debian
foundation, redhat foundation - and several others.
Its still open source and still follows the GPL rules.
If Tormach is releasing
Those and Intel Pro 100/1000 cards are prob. the best bet to get going tho.
Reliable cards. =)
// Andreas
John Thornton skrev den 2015-04-08 13:53:
> Yea, I have several PCI network cards and I just grabbed one from the
> pile and put it in.
>
> JT
>
> On 4/8/2015 6:49 AM,
JT
>
> On 4/8/2015 6:31 AM, Andreas Pettersson wrote:
>> So you dont have a a eth0 at all. then you need to add something like this.
>>
>> allow-hotplug eth0
>> iface eth0 inet static
>> address 192.168.1.150
>> netmask 255.255.255.0
>> broadcast 192
have a router with dhcp/dns
you use the second one if not you need to staticly configure.
// Andreas
John Thornton skrev den 2015-04-08 13:26:
> etc/network/interfaces contains two lines:
> auto lo
> iface lo inet loopback
>
> JT
>
> On 4/8/2015 6:17 AM, Andreas Pettersso
You would prob. need to activate the card in the config.
You will find the config file under /etc/network/interfaces
Prob. is the pci card on eth1 instead of eth0 - even if its deactivated
in the bios.
it usually "adresses" it self, just not useable.
// A
John Thornton skrev den 2015-04-08 13:1
Been looking for that for a while now - the included documentation is
not really that comprehensible. Figured out more by looking at pictures
of others wiring and forums than from the PDF.
If you make one, make sure to post it. =)
Marius Alksnys skrev den 2015-04-01 22:39:
> Is there any more vi
Easiest way is to create a new user and startx on that user so you drop
all previous configs.
then just copy you home folder setting files to your old user again..
// A
Erik Christiansen skrev den 2015-03-25 08:36:
> On 24.03.15 22:51, Mark Johnsen wrote:
>> I got a hum dinger...
> You sure have
https://industruino.com/
And Arduino unit in the DIN form factor - could be useful in our
applications im guessing. =)
// A
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and
My guess is that you would need 2x RS232, one for Rx and one for Tx, to
achieve the speed necessary, and a SPI interface card that could talk
dual channel properly.. As Andy said, persuaded - was looking into this
as well actually a while back.
// A
andy pugh skrev den 2015-03-08 12:18:
> On 7
Sweet thanks - *keeps on digging*
// Andreas
Sebastian Kuzminsky skrev den 2015-03-05 22:56:
> On 3/5/15 2:52 PM, Andreas Pettersson wrote:
>> So im digging through the code after figuring out the infrastructure i
>> figure that
>> there somewhere is a library exposing its
So im digging through the code after figuring out the infrastructure i
figure that
there somewhere is a library exposing itself to python and tcl.
And wonder if someone know what that is called in the source.
What im talking about is the bridge between the NML in Linuxcnc and Python
import lin
anyway. =)
// Andreas
John Kasunich skrev den 2015-02-27 23:37:
> On Fri, Feb 27, 2015, at 02:13 PM, Andreas Pettersson wrote:
>> If its stable running after 15min of basicly 100% cpu load - do i need
>> to bother running it any longer?
>>
> Is if 15 minutes of doing th
If its stable running after 15min of basicly 100% cpu load - do i need
to bother running it any longer?
// Andreas
Sebastian Kuzminsky skrev den 2015-02-27 19:49:
> On 2/27/15 11:44 AM, Andreas Pettersson wrote:
>> So im guessing the step, where you do ./configure -a in the debian
>
glxgears, gzip -c /dev/urandom /dev/null, stress -c 16 -l 16 -m 16 -t1
4400
So i think im in the clear now. =)
Uspace build could handle alot more punishment. =)
// Andreas
Sebastian Kuzminsky skrev den 2015-02-27 19:49:
> On 2/27/15 11:44 AM, Andreas Pettersson wrote:
>> So im guessing
configure and see what it crashes on.. (a step that
ive got stuck on at several times).
// Andreas
Sebastian Kuzminsky skrev den 2015-02-27 18:26:
> On 2/27/15 9:20 AM, Andreas Pettersson wrote:
>> But stock wheezy is 64bit and with the RT_PREEMPT kernel, you managed to
>> compile lin
Ah i see, i was considering rebuilding the kernel, so if this isnt
working i will do that.
But this could be useful to learn as well. - just reinstall for the 30th
time this day.. *lmao*
// Andreas
Sebastian Kuzminsky skrev den 2015-02-27 19:21:
> On 2/27/15 11:17 AM, Andreas Pettersson wr
Sweet im gonna try that, having issues with PAE not claiming one of the
memory modules. =)
Thanks!
// A
Sebastian Kuzminsky skrev den 2015-02-27 18:26:
> On 2/27/15 9:20 AM, Andreas Pettersson wrote:
>> But stock wheezy is 64bit and with the RT_PREEMPT kernel, you managed to
&
:
> On Fri, 27 Feb 2015, Andreas Pettersson wrote:
>
>> Date: Fri, 27 Feb 2015 17:20:53 +0100
>> From: Andreas Pettersson
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Machine Controller (EMC)"
>> Subject: Re:
But stock wheezy is 64bit and with the RT_PREEMPT kernel, you managed to
compile linuxcnc with that? All i get when trying that is "No realtime
kernel present" error.. :/
// A
Peter C. Wallace skrev den 2015-02-27 17:15:
> On Fri, 27 Feb 2015, Andreas Pettersson wrote:
>
>
Are you running a standard Wheezy AMD64 install and the master buildbot
installations as well then??
I can always reinstall, i rather have a 64bit OS than the PAE version
anyday. =)
// A
Peter C. Wallace skrev den 2015-02-27 16:20:
> On Fri, 27 Feb 2015, Andreas Pettersson wrote:
>
&
So i had some issued with drivers, but got around that by installing the
machinekit-rtai kernel
and then manually compile linuxcnc ontop of wheezy..
Well i dont think its optimal.
The setup is a Core i5, 8gb ram and running SSD drivers in a raid 0
configuration.
Lets say it boots like its on a
So built another pc, for linuxcnc, and installed it with the 2.6 image.
Installing works fine, and it finds the network card and all.
But once booted it will not detect the wired network anymore.
The chipset is something onboard, known as Intel i217-V.
Its supposed to work with the e1000e driver f
This is correct, if they "distribute" the software in any way, they are
supposed to provide the source
code within that distribution (See siemens and samsung installation
discs). But later on with GPL you
were also supposed to publish your work for download (This is rarely
followed). That is any
There is actually a universal "drop-in" made by Nick Drobchenko over at
the russian site "cnc club"
He calls it "Features", and it a veeery flexible conversational..
https://www.youtube.com/watch?v=fkOJhT69WEc
Download link; https://github.com/cnc-club/linuxcnc-features
// Andreas
John Alexande
The lathe was linuxcnc from day one, it was shipped with it even.
andy pugh skrev den 2015-02-19 00:03:
> On 18 February 2015 at 21:56, Andrew wrote:
>
>> The new TP wasn't so nesessary for a lathe, right?
>> Looks like Tormach is going to use LinuxCNC for their mills too.
>>
> The Tormach web-p
hat with no fuss.
>
> Some plastics and greasy stuff do not get along well. The *styrenes in
> particular can be turned into shattered sugar just by the vapors of
> vaselene in a surprisingly short time.
>
>> Dave
>>
>> On 2/18/2015 9:06 AM, Andreas Pettersson wrote:
&
http://www.ebay.com/itm/2pcs-GX-16mm-8-Pin-Aviation-Male-Female-Plug-Panel-Power-Chassis-Metal-Connector-/261504110088?pt=LH_DefaultDomain_0&hash=item3ce2dc0e08
works quite well .. There is several other variations as well.
kqt4a...@gmail.com skrev den 2015-02-18 14:58:
> For those who build you
That should PCW be able to answer.. If there been a buyup of MESA cards,
that would be big buisness i imagine. ;)
// A
Belli Button skrev den 2015-02-18 11:34:
> I'm more curious about the hardware, do you think they are using 5i25 from
> Mesa or is it something of their own?
>
>
>
>
> -
Well in respect for John that i have a dialog with i think i toned it
down quite a bit and did not
engage in a full on flame war - which i could have. ;)
One could be alot of more aggressive in this regard and contact a couple
of organisations
that goes after companies that does this in the cour
When you do derivative work in accordance to GPL you are supposed to
publish
your alterations with the source code in its full for other to do
derivative work off of that.
(In Accordance with the GPL licensing form, even the LGPL has this
clause and is clearly stated.)
You are allowed to make
Well so far it seems that the giving back part is what Andy found out
and posted on the NYCCNC youtube comments as well.
Digging through the source code on git I really don't see any other
major contribution other than the tool path rewrite.
And would gladly want to see a list of them contributio
Well after some struggling yesterday we can summarize it with, that the
magic smoke escaped the7i90HD card
because i possibly grounded it wrong and i assume i killed the 7i48 card
as well in the process.
The Argon driver survived tho, and driving it around on the Simplemotion
interface works fla
Well that would be one solution i guess. Just wiring both of em to the
mesa card wouldnt work im guessing here..
They are normall closed and should have 5V signal at all times for
"enable".. and guessing when you hit a limit switch you need
to signal that back thru an input card and tell linux cn
The fun part here is that i'm bounced back and forth between ask Granite
and ask Mesa.. *luls*
// A
Peter C. Wallace skrev den 2015-02-11 21:36:
> On Wed, 11 Feb 2015, Andreas Pettersson wrote:
>
>> Date: Wed, 11 Feb 2015 21:19:48 +0100
>> From: Andreas Pettersson
// A
Peter C. Wallace skrev den 2015-02-11 20:14:
> On Wed, 11 Feb 2015, Andreas Pettersson wrote:
>
>> Date: Wed, 11 Feb 2015 19:57:39 +0100
>> From: Andreas Pettersson
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Mac
uld do the same thing
>
> On Wed, Feb 11, 2015 at 1:57 PM, Andreas Pettersson
> wrote:
>
>> Well if you look at this page, and you tell me.. is there a Enable drive
>> pin??
>>
>> http://granitedevices.com/wiki/Argon_user_guide/J5_connector_electrical_interfac
eas Pettersson wrote:
>
>> Date: Wed, 11 Feb 2015 17:40:33 +0100
>> From: Andreas Pettersson
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: emc-users@lists.sourceforge.net
>> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
&
dsheet, so you need to examine the
> manual more closely.
>
> -- Ralph
> ____________
> From: Andreas Pettersson [andr...@roughedge.se]
> Sent: Tuesday, February 10, 2015 11:03 PM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Ne
On 2015-02-11 10:51, andy pugh wrote:
> On 11 February 2015 at 07:03, Andreas Pettersson wrote:
>> The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i
>> need to split the encoder cables from the Driver and connect em to the
>> mesa card as well.. Not sure
So i got this Mesa 7i48 analog servo card, a 15pin differential encoder,
and the argon driver.
Make notice i have no clue what im doing, so i made this chart and just
connect the pins together basicly
with a color chart.
The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i
nee
51 matches
Mail list logo