to be applied. The
question is where?
I swear I've seen this discussed before, but for the life of me can't find
it anywhere.
Thanks for any pointers!
-Kip
--
Slashdot TV. Video for Nerds. Stuff that Matters.
http
at 12:28:46PM -0400, Kip Shaffer wrote:
When rotation_xy is 0 (and tool_offset is all zeros) the following is
true:
Work position = actual_position - g92_offset - g5x_offset
However, when rotation_xy is not zero, a rotation has to be applied. The
question is where
found that RESUME would often turn into RUN when the machine switched
away from PAUSED.
Let me know if you would like more information.
-Kip
On Wed, May 14, 2014 at 8:10 AM, Erik Friesen e...@aercon.net wrote:
I have found myself wishing I could insert c snippets somehow, to me it is
would be way
. Reversing A and B fixed the problem.
Maybe this will help you too.
-Kip
On Mon, Nov 11, 2013 at 6:35 AM, Viesturs Lācis viesturs.la...@gmail.comwrote:
Hello!
I am trying to help a guy that has retrofitted a lathe to LinuxCNC.
He has 5i25 + 7i77 cards and 2.5.0 version installed.
The problem
have a lens with something
similar to a 10cm focal length tomorrow.
-Kip
On Thu, Nov 7, 2013 at 9:30 AM, Ralph Stirling
ralph.stirl...@wallawalla.edu wrote:
A couple of months ago I spent a bit of time working on a camera
based system for calibrating the position of a syringe needle
event.
I posted this on the wiki here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?One_Button_Run/Resume
Enjoy!
-Kip
attachment: run_pause_halui_schematic.png--
AlienVault Unified Security Management (USM) platform delivers
:
self.ini.setvalue(objectname, objectvalue)
-Kip
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
So when a user selects File-Quit, a SIGTERM should be generated? It
doesn't trigger the on_unix_signal(), whereas hitting Control-C does.
I think for now, I am going to regard auto-saving widget states as
unreliable. Instead, I will keep anything that ought to be saved in
vars, which don't
resolved the problem by putting the 'on_destroy' signal on the same
widget that was being read first. There is no way to determine which
widget will be first, other than by putting in print statements.
Has anyone else seen this behavior?
-Kip
', formerly 'RCLK'
SHCP = Shift register clock, formerly 'SRClock'
DS = Serial data Input, formerly 'Ser'
PL = Parallel Load, formerly 'SRLoad'
-Kip
On Tue, Feb 5, 2013 at 1:33 PM, kqt4a...@gmail.com wrote:
On Tue, 5 Feb 2013, Roland Jollivet wrote:
On 5 February 2013 16:11, Ralph Stirling
Good idea.
Check out
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Shift_Register_Port_Expander
-Kip
On Sun, Jan 27, 2013 at 8:44 PM, Chris Radek ch...@timeguy.com wrote:
On Sun, Jan 27, 2013 at 06:14:56PM -0500, Kip wrote:
Greetings all! My shift registers seem to be working well as a cheap
/linuxcnc/LinuxCNCShiftRegisters.pdf
It goes into a lot of detail that is probably too basic for most of the
readers of this list, but please let me know if there are things you
would like me to add.
Enjoy!
-Kip
On Thu, 2013-01-03 at 07:18 +0200, Marius Liebenberg wrote:
That sounds impressive. I
the tachometer signal from my cooling fans (120 Hz)!
On Wed, Jan 2, 2013 at 2:11 PM, Marius Liebenberg mar...@mastercut.co.zawrote:
Kip,
Would you be willing to share your module. I am in need of a similar
solution.
Marius
On 2012/12/28 02:54 PM, Kip Shaffer wrote:
Gene,
Not sure if you would
to create 16 output and 16 input lines. I use these lines
for higher-latency signals, since it takes about 1 ms to shift all the bits
in and out.
There is a good article explaining it here:
http://robots.freehostia.com/Software/ShiftRegister/ShiftRegisterBody.html
-Kip
On Fri, Dec 28, 2012 at 5
output pins and read 16 input pins
in my machine.
If this sounds useful, I'll keep you posted with my progress.
-Kip
--
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth
15 matches
Mail list logo
