Hello again,
My previous issue with proc's is still present, however at this point I am
confident that I am just not getting my post processor syntax correct. It keeps
putting the subroutines after the program, instead of loading subs first.
However, I need to get a run of parts out this
: [Emc-users] joint limits
On Friday, October 15, 2010 02:59:09 pm Rudy Munguia did opine:
Hello again,
My previous issue with proc's is still present, however at this point I
am confident that I am just not getting my post processor syntax
correct. It keeps putting the subroutines after
Thank you for the pointers, I looked through the wiki info, and came up with :
G90 G17
G80 G49 G40
G54
G91 G28 Z0
G90
M01
N1 M6 T1
(TOOL -1- MILL DIA 0.0607 R0. MM )G0 X0.5067 Y1.0684 Z2. S6000 M3
M8
M98 P2 (P-contour-T1)
M98 P3 (F-contour1-T1)
M98 P4 (F-contour2-T1)
M98 P5 (P-contour3-T1)
M98 P6
Hello,
I was using Mach3 up until this past week when a couple really bad storms
passed
through and killed the pc running Mach3. I had already started building an EMC2
pc because I was really tired of trying to work around windows. So I
installed
EMC 2.4(?) on ubuntu 8.04 that I had already
