Well. I finally got rid of all the following errors. Thank you!
Here's the first video of the lathe cutting a lobe.
https://www.youtube.com/watch?v=KzEPyKZ6Xjo=youtu.be
This is the first test so I'm sure I can get more speed from the X axis
and spindle next time I test. Also, I'm taking not a
>
> What kind of driver are you using? I've got HP_UHU on brushed DC servo's
> and a STMBL drive on the AC Servo Harmonic Drive. In both cases those
> fault out if the following error doesn't match. In other words, the drive
> counts the steps input and if the encoder pulses don't match the
> Don't forget I'm running servos not steppers. But yes, I'm running them in
> step+dir mode. This is the first time I'm using a servo with this control
> method so I really don't know what could happen if a commanded movement
> cannot be achieved. I suppose the servo will trigger an overload
> >
> > escribió:
> > > On Sat, 25 Apr 2020, Gene Heskett wrote:
> > > > Date: Sat, 25 Apr 2020 17:09:33 -0400
> > > > From: Gene Heskett
> > > > Reply-To: "Enhanced Machine Controller (EMC)"
> > > >
> > > > To: e
April 2020 17:04:50 Peter C. Wallace wrote:
> > > >> On Sat, 25 Apr 2020, Leonardo Marsaglia wrote:
> > > >>> Date: Sat, 25 Apr 2020 16:53:40 -0300
> > > >>> From: Leonardo Marsaglia
> > > >>> Reply-To: "Enhanced Machine Con
gt; > On Sat, 25 Apr 2020, Gene Heskett wrote:
> > > Date: Sat, 25 Apr 2020 17:09:33 -0400
> > > From: Gene Heskett
> > > Reply-To: "Enhanced Machine Controller (EMC)"
> > >
> > > To: emc-users@lists.sourceforge.net
> > > Subje
On 04/25/2020 02:53 PM, Leonardo Marsaglia wrote:
I happen to have some following erros on both X and Z axis from time to
time, mostly when the machine is not homed (but that could be my
impression).
For historical reasons, the naming of the following error
parameters are confusing.
FERROR is
anced Machine Controller (EMC)"
> >
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] Help with some sporadic followin errors
> >
> > On Saturday 25 April 2020 17:04:50 Peter C. Wallace wrote:
> >
> >> On Sat, 25 Apr 2020, L
;Enhanced Machine Controller (EMC)"
> > Subject: [Emc-users] Help with
> > some sporadic followin errors
> >
> > Hello to all,
> >
> > We've almost finished to wire and configure the mazak to work with
> > LCNC. So far, joint movements and homing a
On Sat, 25 Apr 2020, Leonardo Marsaglia wrote:
Date: Sat, 25 Apr 2020 16:53:40 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Help with some sporadic followin errors
Hello t
Hello to all,
We've almost finished to wire and configure the mazak to work with LCNC. So
far, joint movements and homing are working flawlessly. I'm using servos
in step+dir mode so no real feedback is coming from the joints of the
machine.
I happen to have some following erros on both X and Z
11 matches
Mail list logo
