Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-08-14 Thread Sven Wesley
Nice! I was on the pre-release and a major mess AKA RTAI version conflict occured. Nevermind, the computer isn't hooked up to a machine yet so I might as well reinstall. /Sven 2014-07-31 22:51 GMT+02:00 Leonardo Marsaglia : > Thanks as always to the developers and users that get involved in th

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-31 Thread Leonardo Marsaglia
Thanks as always to the developers and users that get involved in this wonderful community!. As I always say, you're giving a great help to people, not only in the immediate future, but as the time goes by you find that you've learned a lot of valuable things. I don't want to be dramatic, but cert

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-31 Thread Alexandru Joni
That was me. Hope it's ok.. Alex On July 31, 2014 4:55:30 PM EEST, Sebastian Kuzminsky wrote: > > >On July 31, 2014 6:02:17 AM MDT, John Thornton >wrote: >>Hi Seb, >> >>I think the link http://linuxcnc.org/docs/html/ should point to 2.6.0 >>docs now. > >I just changed it. > >Was it you that up

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-31 Thread Sebastian Kuzminsky
On July 31, 2014 6:02:17 AM MDT, John Thornton wrote: >Hi Seb, > >I think the link http://linuxcnc.org/docs/html/ should point to 2.6.0 >docs now. I just changed it. Was it you that updated the www.linuxcnc.org front page? If so, thanks! -- Sebastian Kuzminsky ---

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-31 Thread John Thornton
Hi Seb, I think the link http://linuxcnc.org/docs/html/ should point to 2.6.0 docs now. JT On 7/28/2014 11:51 PM, Sebastian Kuzminsky wrote: > Howdy folks, at long last LinuxCNC 2.6.0 is here. > > Here is a summary of changes since 2.5, although if you've been > following the 2.6 pre-release an

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-30 Thread Sebastian Kuzminsky
On 07/30/2014 03:45 AM, Andrew wrote: > 2014-07-30 11:11 GMT+03:00 Andrew >: > > E: Package 'linux-image-3.4.55-rtai-2' has no installation candidate > E: Package 'rtai-modules-3.4.55-rtai-2' has no installation candidate > > What could be the problem? > >

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-30 Thread Andrew
2014-07-30 11:11 GMT+03:00 Andrew : > E: Package 'linux-image-3.4.55-rtai-2' has no installation candidate > E: Package 'rtai-modules-3.4.55-rtai-2' has no installation candidate > > What could be the problem? > OK, I used *$ sudo apt-get install linux-image-3.4-9-rtai-686-pae rtai-modules-3.4-9-

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-30 Thread Andrew
2014-07-29 7:51 GMT+03:00 Sebastian Kuzminsky : > Howdy folks, at long last LinuxCNC 2.6.0 is here. > > Here is a summary of changes since 2.5, although if you've been > following the 2.6 pre-release announcements you already have more detail > than what's here: > > http://wiki.linuxcnc.org/c

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-29 Thread andy pugh
On 29 July 2014 15:37, Chris Radek wrote: > On my collet-using machine, I'm using remap of M6 to probe the > length of the new tool and write it to the tool table. Remap really is an enormously useful new feature in 2.6. Michael Haberler is owed something of a vote of thanks for that. -- atp I

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-29 Thread Gene Heskett
On Tuesday 29 July 2014 10:37:11 Chris Radek did opine And Gene did reply: > On Mon, Jul 28, 2014 at 10:51:40PM -0600, Sebastian Kuzminsky wrote: > > Howdy folks, at long last LinuxCNC 2.6.0 is here. > > This is great, thank you, and thanks to everyone who has worked on > it! > > On my collet-usi

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-29 Thread Chris Radek
On Mon, Jul 28, 2014 at 10:51:40PM -0600, Sebastian Kuzminsky wrote: > Howdy folks, at long last LinuxCNC 2.6.0 is here. This is great, thank you, and thanks to everyone who has worked on it! On my collet-using machine, I'm using remap of M6 to probe the length of the new tool and write it to the

Re: [Emc-users] LinuxCNC 2.6.0 is out!

2014-07-29 Thread Jeff Epler
On Mon, Jul 28, 2014 at 10:51:40PM -0600, Sebastian Kuzminsky wrote: > Howdy folks, at long last LinuxCNC 2.6.0 is here. Thank you Seb! Jeff -- Infragistics Professional Build stunning WinForms apps today! Reboot your Wi

[Emc-users] LinuxCNC 2.6.0 is out!

2014-07-28 Thread Sebastian Kuzminsky
Howdy folks, at long last LinuxCNC 2.6.0 is here. Here is a summary of changes since 2.5, although if you've been following the 2.6 pre-release announcements you already have more detail than what's here: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Released_2.6.X If you want to upgrade from an