Well after some struggling yesterday we can summarize it with, that the
magic smoke escaped the7i90HD card
because i possibly grounded it wrong and i assume i killed the 7i48 card
as well in the process.
The Argon driver survived tho, and driving it around on the Simplemotion
interface works fla
On 11 February 2015 at 20:50, TJoseph Powderly wrote:
> http://granitedevices.com/w/images/thumb/6/60/J5switches.png/500px-J5switches.png
I think that might be for applications where the drive homes itself.
(The drives are really rather clever, possibly too clever).
http://granitedevices.com/wik
Well that would be one solution i guess. Just wiring both of em to the
mesa card wouldnt work im guessing here..
They are normall closed and should have 5V signal at all times for
"enable".. and guessing when you hit a limit switch you need
to signal that back thru an input card and tell linux cn
A hack:
look at their picture
http://granitedevices.com/w/images/thumb/6/60/J5switches.png/500px-J5switches.png
isolate the 2 limit switches
add a relay contact between 5 V and this new subnet
your new invented 'enable' will _allow_ the limits to operate
else the drive thinks you are simultaneoul
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: emc-users@lists.sourceforge.net
>> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
>>
>> Oki, i can admit im stupid.. I can reprogram prob. most of this software
>> as need
On Wed, 11 Feb 2015, Andreas Pettersson wrote:
> Date: Wed, 11 Feb 2015 21:19:48 +0100
> From: Andreas Pettersson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Need wiring advice, Argon + 7
Pettersson wrote:
>>>
>>>> Date: Wed, 11 Feb 2015 17:40:33 +0100
>>>> From: Andreas Pettersson
>>>> Reply-To: "Enhanced Machine Controller (EMC)"
>>>>
>>>> To: emc-users@lists.sourceforge.net
>>>> Subjec
gt;>>> From: Andreas Pettersson
>>>> Reply-To: "Enhanced Machine Controller (EMC)"
>>>>
>>>> To: emc-users@lists.sourceforge.net
>>>> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
>>>>
>>>> Can'
On Wed, 11 Feb 2015, Andreas Pettersson wrote:
> Date: Wed, 11 Feb 2015 19:57:39 +0100
> From: Andreas Pettersson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Need wiring advice,
as Pettersson
> >> Reply-To: "Enhanced Machine Controller (EMC)"
> >>
> >> To: emc-users@lists.sourceforge.net
> >> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
> >>
> >> Can't actually find an enable input port on the Arg
eas Pettersson wrote:
>
>> Date: Wed, 11 Feb 2015 17:40:33 +0100
>> From: Andreas Pettersson
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: emc-users@lists.sourceforge.net
>> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
&
On Wed, 11 Feb 2015, Andreas Pettersson wrote:
> Date: Wed, 11 Feb 2015 17:40:33 +0100
> From: Andreas Pettersson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Need wiring advice, Argon + 7i48
dsheet, so you need to examine the
> manual more closely.
>
> -- Ralph
>
> From: Andreas Pettersson [andr...@roughedge.se]
> Sent: Tuesday, February 10, 2015 11:03 PM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Ne
thing labeled
that way on your spreadsheet, so you need to examine the
manual more closely.
-- Ralph
From: Andreas Pettersson [andr...@roughedge.se]
Sent: Tuesday, February 10, 2015 11:03 PM
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Need wiring a
I have some spare 7i37TA in the box, if that is really urgent,
shipping within EU should be within 20-30 eur limits.
Viesturs
2015-02-11 13:52 GMT+02:00 andy pugh :
> On 11 February 2015 at 10:28, Andreas Pettersson wrote:
>> using the TA or the COM has been one of my ponderings, thougt
>> if i
On 11 February 2015 at 10:28, Andreas Pettersson wrote:
> using the TA or the COM has been one of my ponderings, thougt
> if i could get away with the COM cards, because waiting time on the TA
> card is about 6-8 weeks atm.
http://www.duzi.cz/shop_cnc/index.php?main_page=product_info&cPath=1_5&pr
On 2015-02-11 10:51, andy pugh wrote:
> On 11 February 2015 at 07:03, Andreas Pettersson wrote:
>> The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i
>> need to split the encoder cables from the Driver and connect em to the
>> mesa card as well.. Not sure if this is the right w
On 11 February 2015 at 07:03, Andreas Pettersson wrote:
> The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i
> need to split the encoder cables from the Driver and connect em to the
> mesa card as well.. Not sure if this is the right way of doing it.
>
> https://docs.google.com/
So i got this Mesa 7i48 analog servo card, a 15pin differential encoder,
and the argon driver.
Make notice i have no clue what im doing, so i made this chart and just
connect the pins together basicly
with a color chart.
The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i
nee
19 matches
Mail list logo