On 11/22/2013 09:43 AM, Tomaz T. wrote:
I am setting XHC HB04 wireless pendant up. I am almost satisfied how
everything works except for bouncy buttons.
Did you maybe found any good workaround to prevent unwanted switching from
world to joint mode after executing MDI command programmed for
On Thu, Nov 21, 2013 at 08:08:57PM +, andy pugh wrote:
On 21 November 2013 16:32, Marius Alksnys marius.alks...@gmail.com wrote:
I am thinking which way to go:
1. add debouncing to the pendant driver
2. use additional 'debounce' components in hal
3. Change halui behaviour to take
I am setting XHC HB04 wireless pendant up. I am almost satisfied how
everything works except for bouncy buttons. The problem is actual for
start button, which starts the program, the pause button and the spindle
button.
Due to halui pin structure I am using 'toggle2nist' component. But it
On 21 November 2013 16:32, Marius Alksnys marius.alks...@gmail.com wrote:
I am thinking which way to go:
1. add debouncing to the pendant driver
2. use additional 'debounce' components in hal
3. Change halui behaviour to take only one input pin for start / pause /
resume program or start /
I am setting XHC HB04 wireless pendant up. I am almost satisfied how
everything works except for bouncy buttons.
Did you maybe found any good workaround to prevent unwanted switching from
world to joint mode after executing MDI command programmed for certain button?
