On Wed, Jan 5, 2011 at 9:05 AM, wrote:
> On Tue, 4 Jan 2011, Don Stanley wrote:
>
> > Hi Richard;
> > I am not familiar with stepconfig therefore not understanding what is
> > happening.
> >
> > If you are attempting to home and stay at the + end if travel, the
> HOME=0.0
> > will
> > override a
On Tue, 4 Jan 2011, Don Stanley wrote:
> Hi Richard;
> I am not familiar with stepconfig therefore not understanding what is
> happening.
>
> If you are attempting to home and stay at the + end if travel, the HOME=0.0
> will
> override a HOME_OFFSET= setting. If that is what is happening remove th
Hi Richard;
I am not familiar with stepconfig therefore not understanding what is
happening.
If you are attempting to home and stay at the + end if travel, the HOME=0.0
will
override a HOME_OFFSET= setting. If that is what is happening remove the
HOME=0.0 and it will finish the home where you are
You may toggle the polarity of SCALE for changing direction. You may also
toggle the polarity of HOME_SEARCH_VEL, HOME_LATCH_VEL for homing direction.
-ysli
On Tue, Jan 4, 2011 at 9:03 AM, wrote:
> I used stepconf to setup my Fireball V90
> The only hitch was to invert the x direction
> Now I ad
I used stepconf to setup my Fireball V90
The only hitch was to invert the x direction
Now I added two limit switches, one at each end of the x axis
I configured pin 10 as x axis home and limit
The only problem is it homes in the wrong direction
If I once again use stepconf and uncheck the box to in
