2012/1/7 Spiderdab <77...@tiscali.it>:
>
> Note that the same setup works on my machine. Here it is under Virtualbox,
> and i want to know why it doesn't run.
AFAIK it has never been encouraged to run EMC on virtual machines.
First of all, due to incredible latency numbers.
I have not been playin
day, 7 January 2012 10:15 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] problems with USB inside my sim (was: .so
> components?)
>
>
> > > ...tgvcp.hal:141: Pin 'hidcomp.0.Slider.fvalue' does not exist
> > The pin is not cr
ehm... it must be something stupid with Virtualbox memory i think..
I just started again Vbox without 3Dsupport, neither VT-x or any kind of
acceleration.
Then first time run the full machine and it runs ok!!
closed the window, then re-run the same machine and it gives me error...
i'm starting to
> > ...tgvcp.hal:141: Pin 'hidcomp.0.Slider.fvalue' does not exist
> The pin is not created but i don't know if it's .hal fault or hidcomp's.
...
> if i try to run my setup with hidcomp, but without gladevcp i have two cases:
> -it's ok if it's the first thing i do after turning on the machine
Il giorno sab, 07/01/2012 alle 09.25 +1100, Frank Tkalcevic ha scritto:
> > in my setup i use a joystick, and i load that using hidconfig/hidcomp.
> > if i run hidconfig it can see the joystick, so i think permissions are
> right. but
> > when i run my machine i have this error:
> > ..2012/01/06
>
> in my setup i use a joystick, and i load that using hidconfig/hidcomp.
> if i run hidconfig it can see the joystick, so i think permissions are
right. but
> when i run my machine i have this error:
> ..2012/01/06
> 16:56:49.243,2011,1,hiddevice.cpp:172,Error,hidcomp,HIDDevice,Error
> reading HID
I've solved my kins-compile problem. I just had to uninstall emc2 and
install emc2-sim, also if i've compiled my emc2-dev as simulator.
Now I have another problem. I'm far from my machine pc, so i've copied
my setup and try to run that as sim, to work on my Gladevcp panel. I
i've installed emc2 wi
