On Monday 27 March 2017 03:56:53 Gene Heskett wrote:
> On Monday 27 March 2017 00:17:19 Erik Christiansen wrote:
> > On 26.03.17 18:53, Gene Heskett wrote:
> > > But is 7 the correct factor? It should be fairly easy to jack it
> > > back out.
> >
> > Gene, I've never made one of them, but looking
thanks gene and andy looks like i have some more reading to do
i will see whats available here and see what i can come up with
On 17-03-27 01:29 AM, Gene Heskett wrote:
> On Monday 27 March 2017 01:38:13 linden wrote:
>
>> An other question for the Electronics experts on here;
>>
>> Is there a
I can't see how lathe alignment could affect your angle. If you turned the OD
running forwards with the cutting tool in front and bored the ID running in
reverse with the cutting tool in back, then yes. But if both were done with
the spindle going forward then the tip of the cutting tool is
I find myself astonished that I don't have a 3D printer.
I am thinking of buying one.
Longer-term I think I will end up making a large-format delta pritner,
so the one I buy will be more ot a toe-dipping exercise, and I am
looking at:
http://www.ebay.co.uk/itm/182454763977
Any thoughts?
--
atp
Kind of small.
ACME leadscrews instead of ballscrews
Not much detail on the build platform (other than thickness)
Probably OK for a learning experience & making small toys.
Ray
--J. Ray Mitchell Jr.
jrmitche...@gmail.com
(818)324-7573
The dogmas of the quiet past, are inadequate to the
This morning one of the machine operators ran an update on a machine that had
been working fine yesterday.
The machine is an older Lucid install with Linuxcnc 2.7.8.
It looks to me like the problem has something to do with the Gladevcp, but it
had been working before. Anyone know what the
On Tuesday 28 March 2017 10:06:12 John Kasunich wrote:
> I can't see how lathe alignment could affect your angle. If you
> turned the OD running forwards with the cutting tool in front and
> bored the ID running in reverse with the cutting tool in back, then
> yes. But if both were done with
I know linuxcnc does not work with latest version of glade but not much more.
On Tue, 28 Mar 2017 10:36:50 -0400 (EDT)
"Todd Zuercher" wrote:
> This morning one of the machine operators ran an update on a machine that had
> been working fine
2017-03-28 17:48 GMT+03:00 andy pugh:
> I find myself astonished that I don't have a 3D printer.
> I am thinking of buying one.
> Longer-term I think I will end up making a large-format delta pritner,
> so the one I buy will be more ot a toe-dipping exercise, and I am
> looking at:
>
That's a clone of a Flashforge, which is a clone of the Makerbot Replicator
(old Replicator, not the new one which they also oddly called the
Replicator). It's upgraded in some ways, possibly downgraded in others.
But it is known to work pretty well. My original Replicator is still
excellent
I have one that is very similar and I bought it pretty much out of
curiosity. It sits in the corner of my office gathering dust. My
experience with 3D printing was pretty underwhelming. It is very finicky
and the results aren't that great. It gets pretty frustrating when
something goes wrong 4
xxcoder and I have one of these which goes on sale tomorrow for $196
https://www.aliexpress.com/item/Full-Metal-Frame-3D-Printer-Professional-3d-Color-Printer-with-8GB-SD-Card-LCD-One-Roll/32705186296.html
It does need a bit of TLC in some areas but seems to print OK. It is a
Prusa i3 clone. I
On Tuesday 28 March 2017 10:48:18 andy pugh wrote:
> I find myself astonished that I don't have a 3D printer.
> I am thinking of buying one.
> Longer-term I think I will end up making a large-format delta pritner,
> so the one I buy will be more ot a toe-dipping exercise, and I am
> looking at:
>
On 28 March 2017 at 17:18, Les Newell wrote:
> The prints also aren't that strong. If you
> put enough time into it you can get some good results but most of the
> stuff I want to make either needs to be strong or dimensionally accurate
> (or usually both together).
My
I have done relatively little 3D printing myself. I do run a community
hackerspace with a number of 3D printers, most of which are broken.
Many, many cheap 3D printers just can't work out of the box. Badly designed
linear axes, terrible ratsnest of wiring, extruder designs that do nothing but
I'm confused about not owning one either.
I keep looking at the items made, at trade shows, and in plastic it all
looks like junk. Good for fridge magnets mostly.
But they're so popular. I must be missing something...
Metal printing on the other hand, would be very useful, but the cost of
powders
On Tuesday 28 March 2017 10:48:18 andy pugh wrote:
>> I find myself astonished that I don't have a 3D printer.
>> I am thinking of buying one.
>> Longer-term I think I will end up making a large-format delta pritner,
>> so the one I buy will be more ot a toe-dipping exercise, and I am
>> looking
> I have one that is very similar and I bought it pretty much out of
> curiosity. It sits in the corner of my office gathering dust. My
> experience with 3D printing was pretty underwhelming. It is very finicky
> and the results aren't that great. It gets pretty frustrating when
> something
On 28 March 2017 at 23:49, Charles Steinkuehler
wrote:
> you may need to
> reprogram the controller with an open-source firmware and switch to
> using a standard slicer vs. the one that comes with it.
I have already written one slicer (runs inside Autodesk Inventor,
Maybe something that uses pellets vs filament and has a large nozzle:
http://www.titan3drobotics.com/pellet-extrusion-3d-printing-on-the-atlas/
https://i0.wp.com/dev.titan3drobotics.com/wp-content/uploads/2016/07/engine-block-edit.jpg
33 hours for that print
On 03/28/2017 09:48 AM, andy pugh
On 3/28/2017 9:48 AM, andy pugh wrote:
> I find myself astonished that I don't have a 3D printer.
> I am thinking of buying one.
> Longer-term I think I will end up making a large-format delta pritner,
> so the one I buy will be more ot a toe-dipping exercise, and I am
> looking at:
>
On 03/28/2017 02:25 PM, Chris Albertson wrote:
> I see the argument as going like this
>
> One group says these 3d printers are worthless because they can't be used
> to make the stuff I am now making. For example "I can't print an exhaust
> valve for a diesel truck motor."
>
> The second group
On 3/28/2017 6:01 PM, andy pugh wrote:
> On 28 March 2017 at 23:49, Charles Steinkuehler
> wrote:
>> you may need to
>> reprogram the controller with an open-source firmware and switch to
>> using a standard slicer vs. the one that comes with it.
>
> I have already
That same one can be had on Ebay, for $154, with free US based shipping:
http://www.ebay.com/itm/332158713527
If you are a minimalist, there's a version for $1.00 less:
http://www.ebay.com/itm/112220106379?var=412749117925=true
On 03/28/2017 11:05 AM, John Thornton wrote:
> xxcoder and I
On 28 March 2017 at 23:54, MC Cason wrote:
> I can envision a future where you see something on whatever
> future version of the internet is, you order it, and it is built in your
> home manufacturing unit. Instant gratification at it's finest.
> However, a LOT of
On 03/28/2017 06:07 PM, andy pugh wrote:
> On 28 March 2017 at 23:54, MC Cason wrote:
>> I can envision a future where you see something on whatever
>> future version of the internet is, you order it, and it is built in your
>> home manufacturing unit. Instant
If you want inexpensive but good quality and compact, check out the Monoprice
Select Mini. (AKA Malyan M200) There's a Facebook group for it with over 5,000
members, many of which have two or more of the printers.
It comes fully assembled out of the box, mostly steel construction and weighs
PVC foam moulding might be another option:
https://www.homedepot.ca/en/home/p.1-inch-x-4-inch-x-8-feet-veranda-pvc-trim-board-white.1000761916.html
You can make large blocks by glueing 1x4 or 1x6 pieces with PVC glue. I've
been using it as an alternative to machineable wax. It is more
I've got a 3D printer here, a PrintrBot Simple, wooden one.
The city library has a set of printers and laser cutters. I think I'd use
that. Current project, drawing up some parts that will get printed at the
library or at Shapeways.
Do you really need a 3D printer? I don't - my Printrbot is
On 28 March 2017 at 18:31, John Alexander Stewart wrote:
> Do you really need a 3D printer?
No, nor do I need a lathe or milling machine, I could get parts made
by machine shops. Or simply not bother making stuff at all.
--
atp
"A motorcycle is a bicycle with a pandemonium
On Tue, Mar 28, 2017 at 10:17 AM, andy pugh wrote:
> On 28 March 2017 at 17:18, Les Newell wrote:
> > The prints also aren't that strong. If you
> > put enough time into it you can get some good results but most of the
> > stuff I want to make
Parts can be quite strong. Although, I've seen plenty of prints with a bad
layer (can be as simple as the air conditioning kicking in and shrinking the
plastic suddenly).
You can print out objects that would be difficult to mill, such as things
requiring 5-axis milling, exotic holddown
Pretty sure those are belt driven, not screw driven.
On Tue, Mar 28, 2017 at 9:14 AM, jrmitchellj .
wrote:
> Kind of small.
> ACME leadscrews instead of ballscrews
> Not much detail on the build platform (other than thickness)
>
> Probably OK for a learning experience &
I see the argument as going like this
One group says these 3d printers are worthless because they can't be used
to make the stuff I am now making. For example "I can't print an exhaust
valve for a diesel truck motor."
The second group sees the printers and thinks about using it for new
Andy
I own two 3d printers, and have had mixed results. The second one
looked like a bargain but was made out of plywood and firmly etched in
my mind the advantage of metal. My first one was a single extruder
model made out of aluminum and plastic. Later revisions are replacing
even
Not sure if anyone would be interested, but in about 11 hours, Aliexpress
is having a sale. I am seeing some 3D printers listed.
On Tue, Mar 28, 2017 at 12:53 PM, Charles Buckley
wrote:
> Pretty sure those are belt driven, not screw driven.
>
> On Tue, Mar 28, 2017 at
Andy to my comment wrote:
>> Do you really need a 3D printer?
> No, nor do I need a lathe or milling machine, I could get parts made
> by machine shops. Or simply not bother making stuff at all.
True enough, although a group of us do tend to share tools - last foreign
user of my machine shop
2017-03-28 21:59 GMT+03:00 John Alexander Stewart:
> The olde Stratasys that I had access to at work (I have since left)
> produced items about 1,000x better than I ever got from my home printer,
> despite weeks and weeks of tweaking the home printer.
>
Do you mean FDM Stratasys?
What was so
I think the cake is a little bit funny and it also taste good but it is not the
best cake around.
On Tue, 28 Mar 2017 12:25:41 -0700
Chris Albertson wrote:
> I see the argument as going like this
>
> One group says these 3d printers are worthless because they can't
The DMG-Mori combined powdered metal/laser AM
and 5-axis CNC machining is very cool, but something
close to $1M for the system. There are some efforts
being made at wire-fed welder AM systems. I met a
fellow from such a company at a 3d printing conference
two weeks ago. He was lugging around a
Two replies here:
From: Andrew
>
> > The olde Stratasys that I had access to at work (I have since left)
> > produced items about 1,000x better than I ever got from my home printer,
> > despite weeks and weeks of tweaking the home printer.
> >
>
> Do you mean FDM Stratasys?
>
> Date: Tue, 28 Mar 2017 18:17:31 +0100
> From: andy pugh
> Subject: Re: [Emc-users] 3D Printers
>
> On 28 March 2017 at 17:18, Les Newell wrote:
> > The prints also aren't that strong. If you
> > put enough time into it you can get some good
42 matches
Mail list logo