On Tue, Apr 24, 2018, 14:38 Peter C. Wallace wrote:
> On Tue, 24 Apr 2018, jeremy youngs wrote:
>
> > Date: Tue, 24 Apr 2018 19:17:40 +
> > From: jeremy youngs
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
On 24 April 2018 at 20:59, jeremy youngs wrote:
>> Dell optiplex 620 2.8 GHz duo core , 4gb ram , running through the
>> motherboard epp as I had seen a couple post you made on the forum about pci
>> boards being sketchy, although I have had no issues running stepper drives
On Tuesday 24 April 2018 15:17:40 jeremy youngs wrote:
> 7i90 zip extracted to public folder. Invocation of mesaflash says no
> program to open it . Tried the mesaflash icon and the mesaflash 3
> icon.
I guess I'm old fashioned. I cd to the directory its in and type
"sudo ./mesaflash"enter.
7i90 zip extracted to public folder. Invocation of mesaflash says no
program to open it . Tried the mesaflash icon and the mesaflash 3 icon. How
do I know what dependencies are required to run this. V 2.7 11? Installed
--
On Tue, 24 Apr 2018, jeremy youngs wrote:
Date: Tue, 24 Apr 2018 19:17:40 +
From: jeremy youngs
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re:
Tried 2x more, both through pnc and halrun, same results . Thank you
On Tue, Apr 24, 2018, 18:28 jeremy youngs wrote:
> Accept component changes gave no effect. Output of path in halcmd at show
> pins is this
> Component pins:
> Owner type dir value name
> Halcmd:
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3 places around a 3/32 drill shank. What spec of
5150 , do you have a kiln ? It will need bent, normalized . Treated then
tempered . It's the temper that will be most difficult . I would think
somewhere between 4-600 degrees at a 2 hour soak, exact temp will be trial
and error , so you should probably make several. A pid controlled melting
pot
Accept component changes gave no effect. Output of path in halcmd at show
pins is this
Component pins:
Owner type dir value name
Halcmd:
--
Check out the vibrant tech community on one of the world's most
engaging
On 04/24/2018 04:53 PM, Gene Heskett wrote:
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3
On Tuesday 24 April 2018 21:22:00 Ed wrote:
> On 04/24/2018 06:53 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > After 6+ months, gun farts has not shipped the magazine spring I
> > need to finish the conversion to a smaller cartridge in old meat in
> > the pot.
> >
> > This is a flat leaf,
On 24 April 2018 at 23:30, jeremy youngs wrote:
> Obviously, lying got me a bit farther along. However, after populating
> pins, x,y,z, spindle encoder, x,y,z, spindle pwm , when I continue with the
> forward button it says I forget to designate pwm or stepper signal for
>
On Tuesday 24 April 2018 20:41:43 Kirk Wallace wrote:
> On 04/24/2018 04:53 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > After 6+ months, gun farts has not shipped the magazine spring I
> > need to finish the conversion to a smaller cartridge in old meat in
> > the pot.
> >
> > This is a
On 04/24/2018 06:53 PM, Gene Heskett wrote:
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3
14 matches
Mail list logo