On 11/9/21 8:46 PM, Sam Sokolik wrote:
Anyone have specs on this brushed servo from the 70's?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
If I remember correctly the 2000 in the
Anyone have specs on this brushed servo from the 70's?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Tuesday 09 November 2021 13:03:28 John Dammeyer wrote:
> Thanks Stuart,
> They have several different types. I thought maybe you still had the
> original container. No problem. Almost finished my mist coolant
> system. Should be installed this weekend I hope. I'll start with
> that.
> John
John,
I don't remember the name/number of the coolant I had. I got it almost 7
years ago and when I closed my shop two years ago I still had 35 gallons in
the 55 gallon drum. It was their top of the line machining coolant. It has
probably changed names now but I am sure whatever they call it it is
Thanks Stuart,
They have several different types. I thought maybe you still had the original
container. No problem. Almost finished my mist coolant system. Should be
installed this weekend I hope.
I'll start with that.
John
> -Original Message-
> From: Stuart Stevenson
Hi Gene,
No butinski applogy needed.
What I've found doing it 'manually' with air hose, can of WD-40 or a few drops
of cutting oil, depending on what I'm milling is that the air hose is the
nicest other than chips _all_ over the place.
If I watch videos of flood coolant what I observe is that
