On 19 February 2010 07:12, Belli Button be...@iafrica.com wrote:
Here's a question for those in the know. I have a 5I20 that I intend to use
for driving step/dir signals for my stepper motors. I would like to add
encoders to the steppers so that I can measure if I have lost any steps at
Dave wrote:
Do you think you will have any issues with the ultrasonic sensor and
the water mist from the waterjet? I was to work on a waterjet system
next week but the project has been delayed. That machine has a
constant mist/cloud of water vapor around it.
Yeah, I was wondering about
Andy Pugh wrote:
On 19 February 2010 07:12, Belli Button be...@iafrica.com wrote:
How can I
get axis to display the desired positon and the encoder position?
I don't know. But does it actually gain you much? If the numbers are
different you need to stop
You can use a pyvcp
On Fri, 19 Feb 2010, Belli Button wrote:
Date: Fri, 19 Feb 2010 09:12:55 +0200
From: Belli Button be...@iafrica.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
Flying Electron wrote:
Hi,
I was using one of the inputs to read my E-STOP button which shorts to
ground when triggered, but I kept on getting false positives. I looked
at the input pin in halscope and saw a square wave that goes high for
2ms then low for 2ms and repeats. I removed the
