--- On Fri, 5/10/13, YES NOPE9 wrote:
> Is anyone using /
> experimenting with a delta setup ?
> Such as the ones SeeMeCNC.com sells ?
Ones like that can be fast, but the style that uses 3 or 4 levers directly
connected to servos can be extremely fast.
https://www.youtube.com/watch?feature=e
Here is how I have done array repeats in LinuxCNC.
O100 sub
(insert the g-code you want repeated here)
G0 X0Y0
O100 endsub
O102 repeat [2] (number of rows)
O103 repeat [4] (number of colums)
O100 call
G0 X2.38Y0 (width of colums)
G92 X0Y0
O103 end repeat
G92.1
G0 X0Y23.5 (length of rows)
G92 X0
Here is one way i have done it with a program where i machine some
blocks on an indexer on a jig, to machine all 3 faces
handy when you have more than work offsets stored in the control, if
your programmers used to fanuc and used the G52 its pritty similar in
some points i guess...
(SET G54 X)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 5/10/2013 3:58 PM, YES NOPE9 wrote:
> Is anyone using / experimenting with a delta setup ? Such as the
> ones SeeMeCNC.com sells ?
I'm headed that way, but got side-tracked porting to the BeagleBone
ARM platform. If you want to use a PC and not an
Is anyone using / experimenting with a delta setup ?
Such as the ones SeeMeCNC.com sells ?
Best
Gus
--
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases
Sorry but I have to ask, does this mean you no longer make mistakes or you
no longer learn from mistakes? :-)
Roger Neal
-Original Message-
From: John Thornton
Sent: Thursday, May 09, 2013 7:57 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] DIY G-Code
You should hav
2013/5/11 Chris Radek
> On Fri, May 10, 2013 at 11:18:42PM +0300, Viesturs L??cis wrote:
>
> > G0 Z15
> > G0 x0 y0
> > G10 L2 P2 X0 Y0 Z15
>
> I did not check everything, but I think you probably meant L20, not
> L2, here.
>
> http://linuxcnc.org/docs/html/gcode/gcode.html#sec:G10-L2_
Thank
On Fri, May 10, 2013 at 11:18:42PM +0300, Viesturs L??cis wrote:
> G0 Z15
> G0 x0 y0
> G10 L2 P2 X0 Y0 Z15
I did not check everything, but I think you probably meant L20, not
L2, here.
http://linuxcnc.org/docs/html/gcode/gcode.html#sec:G10-L2_
---
This is something I have never understood too well either so I am gonna be
listening intently LOL carry on.
Pete
On Fri, May 10, 2013 at 4:55 PM, Stuart Stevenson wrote:
> How many times are you calling the subroutine?
>
>
> g54
> call
>
> g55
> call
>
> g56
> call
>
> ...
>
>
> On Fri,
How many times are you calling the subroutine?
g54
call
g55
call
g56
call
...
On Fri, May 10, 2013 at 3:36 PM, Kenneth Lerman
wrote:
> On 5/10/2013 4:18 PM, Viesturs Lācis wrote:
> > Hello!
> >
> > Today I was helping my client to prepare a g-code for their new machine I
> > built.
> > The
On 5/10/2013 4:18 PM, Viesturs Lācis wrote:
> Hello!
>
> Today I was helping my client to prepare a g-code for their new machine I
> built.
> The particular code was manually optimized for faster performance and I
> thought that having a code for one part in subroutine and then creating
> another f
Hello!
Today I was helping my client to prepare a g-code for their new machine I
built.
The particular code was manually optimized for faster performance and I
thought that having a code for one part in subroutine and then creating
another file, which just moves around material and calls subroutin
On 5/10/2013 10:29 AM, Norton Allen wrote:
>
> Without a power interlock, what conditions will turn the machine off?
I am running with just the emcrsh interface.
Step 1: virtually disconnect the home switch from the limit pins.
Startup and drive 2 inches off the limit. Shutdown emc
Step 2: virtua
On 5/10/2013 9:43 AM, Kent A. Reed wrote:
> On 5/10/2013 3:05 AM, andy pugh wrote:
>> On 10 May 2013 03:28, Norton Allen wrote:
>>> In this remote configuration, at the moment I do not have access to the
>>> graphical display. Is there a way to alter the configuration so I can
>>> start up from th
On 5/10/2013 3:05 AM, andy pugh wrote:
> On 10 May 2013 03:28, Norton Allen wrote:
>> In this remote configuration, at the moment I do not have access to the
>> graphical display. Is there a way to alter the configuration so I can
>> start up from the command line without a GUI interface?
> You ca
Maybe the reason it's uncommon is that junk (swarf, dust, whatever) will
collect in the groove?
On 9 May 2013 19:08, Gregg Eshelman wrote:
> I'm looking for rollers, wheels or bearings with a pointed edge to run in
> a slot, but all I find are V groove wheels made to run along a pointed edge
>
McMaster sells the wheels with the carraige part number 9904K1 will get
you to the page.
JT
On 5/9/2013 12:08 PM, Gregg Eshelman wrote:
> I'm looking for rollers, wheels or bearings with a pointed edge to run in a
> slot, but all I find are V groove wheels made to run along a pointed edge
> ra
On 10 May 2013 03:28, Norton Allen wrote:
> In this remote configuration, at the moment I do not have access to the
> graphical display. Is there a way to alter the configuration so I can
> start up from the command line without a GUI interface?
You can, but it might not help.
You can define the
18 matches
Mail list logo
