On 30 Jan 2018, at 22:58, Gene Heskett wrote:
> I'll use a bit of this code to locate the backplate centerhole, then the
> data logged by this, to drill/enlarge the boltholes in this backplate
> just enough bigger that I can skid it around to as close to zero run-out
> as I can get it.
>
W
On Tuesday 30 January 2018 11:47:44 Jon Elson wrote:
> Gene,
>
> Here's a hole probe routine I have used with my touch
> probe. The constant 0.1526 is the effective radius of the
> probe tip. Due to the lag in sensing the probe, it makes a
> fairly rapid touch first at F10, backs off, and then d
We have CSS on and are threading with a G33 on our Emco lathe and we are seeing
the spindle decelerating during the cut. Seems like the spindle speed should
be fairly steady at a given X location during a G33 and what it seems like is
that the spindle is still decelerating to speed while it’s i
On Tue, 30 Jan 2018 10:47:44 -0600
Jon Elson wrote:
> Gene,
>
> Here's a hole probe routine I have used with my touch
> probe. The constant 0.1526 is the effective radius of the
> probe tip. Due to the lag in sensing the probe, it makes a
> fairly rapid touch first at F10, backs off, and th
Gene,
Here's a hole probe routine I have used with my touch
probe. The constant 0.1526 is the effective radius of the
probe tip. Due to the lag in sensing the probe, it makes a
fairly rapid touch first at F10, backs off, and then does it
again, from very close, at F1. It writes out the coo