On Monday 16 December 2019 23:12:20 bari wrote:
> On 12/16/19 9:02 PM, Gene Heskett wrote:
> > intel cpus are better than equ dated amd's, my old quad core phenom
> > was phenominally bad at latency-test. 100+ microseconds. New 9th gen
> > 6 core i5, 4 or 5 microseconds. Till kmail beeps the
On 12/16/19 9:02 PM, Gene Heskett wrote:
> intel cpus are better than equ dated amd's, my old quad core phenom was
> phenominally bad at latency-test. 100+ microseconds. New 9th gen 6 core
> i5, 4 or 5 microseconds. Till kmail beeps the chassis speaker, then its
> 200 u-secs.
BIOS issues likely
On Monday 16 December 2019 21:17:40 John Dammeyer wrote:
> > > For example. The board in the machine at the moment generates a
> > > Servo Jitter of 33217 and Base Jitter of 131983.
> >
> > Thats pretty slow john, I'd take that machine to the office and
> > bring out the office machine. It
On 12/16/19 5:40 PM, John Dammeyer wrote:
>
> For example. The board in the machine at the moment generates a Servo Jitter
> of 33217 and Base Jitter of 131983.
> For the MESA and PP configuration I have:
> BASE_PERIOD = 24000
> SERVO_PERIOD = 100
>
> If I understood the document link
> >
> > For example. The board in the machine at the moment generates a Servo
> > Jitter of 33217 and Base Jitter of 131983.
> Thats pretty slow john, I'd take that machine to the office and bring out
> the office machine. It might just be faster. :)
>
Yes Gene,
I sometimes wonder if there
On Monday 16 December 2019 18:40:35 John Dammeyer wrote:
> > -Original Message-
> > From: bari [mailto:bari00...@gmail.com]
> > Sent: December-16-19 10:51 AM
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] Latency Warning Messages
> >
> > It depends on how you
> -Original Message-
> From: bari [mailto:bari00...@gmail.com]
> Sent: December-16-19 10:51 AM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Latency Warning Messages
>
> It depends on how you configure and run Linuxcnc with your intended
> hardware.
>
> In the .INI
On Monday 16 December 2019 16:28:30 andy pugh wrote:
> On Mon, 16 Dec 2019 at 20:19, Gene Heskett
wrote:
> > But, why do you think you need it?
> >
> > Theres one place in the misters control where on the 6040 where I
> > could stand to defeat the D designation by makeing a logic 1 true,
> >
On Monday 16 December 2019 16:26:47 andy pugh wrote:
> On Mon, 16 Dec 2019 at 20:10, Gene Heskett
wrote:
> > https://www.cnczone.com/forums/uncategorised-metalworking-machines/1
> >72
> >
> > >314-cnc.html
> >
> > No, but the lack of a geardown makes the step a major portion of the
> > error,
On Monday 16 December 2019 15:43:10 Chris Albertson wrote:
> Is it really so heavy that you need a hoist or winch?
57 kg? Yes, with my ancient back, let redy kilowatt do the heavy work.
> A cheaper
> solution is a rope and a set of pulleys. If you have a marine
> hardware store near
On Mon, 16 Dec 2019 at 20:19, Gene Heskett wrote:
> But, why do you think you need it?
>
> Theres one place in the misters control where on the 6040 where I could
> stand to defeat the D designation by makeing a logic 1 true, srcing to
> drive instead of sinking it.
I think that the
On Mon, 16 Dec 2019 at 20:10, Gene Heskett wrote:
> https://www.cnczone.com/forums/uncategorised-metalworking-machines/172
> >314-cnc.html
>
> No, but the lack of a geardown makes the step a major portion of the
> error, whereas the use of a much smaller stepper with 8/1 or better on
> that
Is it really so heavy that you need a hoist or winch? A cheaper
solution is a rope and a set of pulleys. If you have a marine
hardware store near you you can find some really nice 3:1 or even 6:1
pulley systems. Buy the kind made for single person racing dinghies
as they are strong
On Monday 16 December 2019 14:11:46 andy pugh wrote:
> On Mon, 16 Dec 2019 at 17:26, Gene Heskett
wrote:
> > Bah! Windows 10. I've one machine that might run it. Windows
> > anything gives me the hives.
>
> https://www.xilinx.com/member/forms/download/xef.html?filename=Xilinx_
On Monday 16 December 2019 14:06:57 andy pugh wrote:
> On Mon, 16 Dec 2019 at 17:21, Gene Heskett
wrote:
> > I see that the worm drive that indexes this thing is not in the
> > base, but in the part that tilts.
>
> It has to be, surely? I can't see how you could tilt the worm and not
> move the
On Mon, 16 Dec 2019 at 17:26, Gene Heskett wrote:
> Bah! Windows 10. I've one machine that might run it. Windows anything
> gives me the hives.
https://www.xilinx.com/member/forms/download/xef.html?filename=Xilinx_ISE_DS_Lin_14.7_1015_1.tar
Linux 14.7 ISE direct link.
But, why do you think you
On Mon, 16 Dec 2019 at 17:21, Gene Heskett wrote:
> I see that the worm drive that indexes this thing is not in the base, but in
> the part that tilts.
It has to be, surely? I can't see how you could tilt the worm and not
move the shaft.
> This throws a large monkey wrench into my plans to
-Original Message-
From: Gene Heskett
Sent: Monday, December 16, 2019 12:25 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
>Bah! Windows 10. I've one machine that might run it. Windows anything gives me
>the hives.
Maybe that's why I've been
On Monday 16 December 2019 13:02:53 Peter C. Wallace wrote:
> On Mon, 16 Dec 2019, Gene Heskett wrote:
> > Date: Mon, 16 Dec 2019 12:24:56 -0500
> > From: Gene Heskett
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users]
It depends on how you configure and run Linuxcnc with your intended
hardware.
In the .INI file there is a section EMCMOT
http://linuxcnc.org/docs/2.6/html/config/ini_config.html#sub:EMCMOT-section
The settings you place in BASE_PERIOD and SERVO_PERIOD set the length of
each of these task periods
On Monday 16 December 2019 12:54:48 Peter C. Wallace wrote:
> On Mon, 16 Dec 2019, Gene Heskett wrote:
> > Date: Mon, 16 Dec 2019 12:24:56 -0500
> > From: Gene Heskett
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users]
with succes I complete first step of mine project about C++ gui. I'm able
to see linuxcnc status Not sure about command:
1. command is send over nmlfile via emcCommand
2. emcCommand bring command from EMC_CMD_MSG structure (CASE A via
RCS_CMD_CHANNEL(NML_FORMAT_PTR, const char
On Monday 16 December 2019 12:38:18 N wrote:
> > I bought 3 different low profile video cards to try and get rid of
> > that latency message. The ultimate and best solution was to buy the
> > MESA 7i92H. Does away with the parallel port completely. John
> > Dammeyer
>
> The parrallel port cause
That's what I've found. When I run the test software to determine machine
latency the on board video provides the smallest number. Any of the add on
boards I tried all gave much worse numbers.
Also, if I understand how this works, if the fastest speed required for
stepping is not to high
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
> I bought 3 different low profile video cards to try and get rid of that
> latency message. The ultimate and best solution was to buy the MESA 7i92H.
> Does away with the parallel port completely.
> John Dammeyer
The parrallel port cause latency messages?
On Monday 16 December 2019 11:14:02 andy pugh wrote:
> On Mon, 16 Dec 2019 at 16:02, Gene Heskett
wrote:
> > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Editing_MESA_Bitfiles
>
> Last edited December 2017
>
> > I can't find the Xilinx ISE software referenced at the "here" site
> > link at the
Hello All;
I see that the worm drive that indexes this thing is not in the base, but in
the part that tilts. The advertising pix hide that fairly well, but it is what
it is.
This throws a large monkey wrench into my plans to belt drive the worm from a
motor on the rear of the base as the
On Mon, 16 Dec 2019 at 16:02, Gene Heskett wrote:
> > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Editing_MESA_Bitfiles
Last edited December 2017
> I can't find the Xilinx ISE software referenced at the "here" site link
> at the top of that page. Am I blind?
No, you need to poke about the site a
On Monday 16 December 2019 08:42:06 andy pugh wrote:
> On Mon, 16 Dec 2019 at 13:00, Leonardo Marsaglia
wrote:
> > Another question, is it possible to edit the pin files in an easy
> > way? Do I need to download the Xilinx ISE program for that?
>
> You need to edit the .vhd files.
>
>
On Mon, 16 Dec 2019 at 13:00, Leonardo Marsaglia wrote:
> Another question, is it possible to edit the pin files in an easy way? Do I
> need to download the Xilinx ISE program for that?
You need to edit the .vhd files.
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Editing_MESA_Bitfiles
--
atp
"A
Thank you Andy as always!
I just loaded a firmware with mesaflash and loaded the hm2_pci component
and everything is working fine.
Another question, is it possible to edit the pin files in an easy way? Do I
need to download the Xilinx ISE program for that?
Because sometimes as I read from Peter
On Mon, 16 Dec 2019 at 12:05, Leonardo Marsaglia wrote:
> I tried the SVST4_8 provided in the website of mesa
I think that the 6i24 is a member of the class of Mesa cards that
needs to have the firmware flashed with Mesaflash. (rather than being
part of the "loadrt hm2_pci" part of the HAL.
Correction. The jumpers are ok but they are W7 down and W9 up. I just typed
it wrong.
El lun., 16 dic. 2019 a las 9:02, Leonardo Marsaglia ()
escribió:
> Well it seems I need some extra help here.
>
> I'm trying to initialize the 6i24 with halcmd in the terminal and I can
> start the hostmot2
Well it seems I need some extra help here.
I'm trying to initialize the 6i24 with halcmd in the terminal and I can
start the hostmot2 driver ok but I can't call for any components like
stepgens or encoders. I can only see the GPIO when I load the
configuration.
I tried the SVST4_8 provided in
On Mon, 16 Dec 2019 at 05:47, Thomas D. Dean wrote:
> Looks like the on-board video adapter shares main memory with the CPU.
> Linuxcnc system requirements says this is a no=no.
That advice might be outdated, I have many systems that seem perfectly
happy with this.
> Question: Will installing
37 matches
Mail list logo
