Re: [Emc-users] MPG Handwheel for use with 7i73
Rick, I may be able to help you out fixing your mpg. I am just up the road from you in Ann Arbor. I sent you a message a couple days ago but it may have gone into your spam mailbox. -Tom > On Feb 7, 2016, at 9:55 AM, r...@superiorroll.com wrote: > > We do need the whole pendant, I found these same ones on eBay, with a 2-3 > week delivery. The ones we normally buy are 3-4 weeks, and cost $150 plus > shipping. > > We broke the stems off of the selector switches on one of the pendants on one > of our turning centers, so I stole the unit off of our machining center > temporarily. > > The selectors are pcb mounted, and I'm not near talented enough to unsolder > the 13 little pins out of the sockets, and solder the new ones back in. > > Rick > > > > ---- Original Message ---- > Subject: Re: [Emc-users] MPG Handwheel for use with 7i73 > From: "John Thornton" <j...@gnipsel.com> > Date: Sun, February 7, 2016 7:45 am > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > Do you just need the MPG or a pendant? I thought AliExpress was for when > you didn't need something in a hurry... > > JT > > On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: >> Just wondering if anyone has had a chance to look at this, all the units we >> already have in service have a "Line Driver" type output, this says "TTL", >> but they are out of stock of the ones we use, and I need one pretty quickly, >> >> Thanks >> >> Rick >> >> >> Original Message >> Subject: MPG Handwheel for use with 7i73 >> From: "Rick Lair" <r...@superiorroll.com> >> Date: Tue, February 2, 2016 2:01 pm >> To: "Emc Users" <emc-users@lists.sourceforge.net> >> >> This is mainly directed at PCW, but after looking at this, >> >> >> http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 >> >> >> Will this be an acceptable handwheel to use with a 7i73? >> >> It says >> - Required 5V+, 150mA, power for MPG >> - Phase output is A ,/A and B,/B; >> - TTL output, drive capability +-20mA; >> >> Not sure about the "TTL" part >> >> > > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
Do you just need the MPG or a pendant? I thought AliExpress was for when you didn't need something in a hurry... JT On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: > Just wondering if anyone has had a chance to look at this, all the units we > already have in service have a "Line Driver" type output, this says "TTL", > but they are out of stock of the ones we use, and I need one pretty quickly, > > Thanks > > Rick > > > Original Message > Subject: MPG Handwheel for use with 7i73 > From: "Rick Lair"> Date: Tue, February 2, 2016 2:01 pm > To: "Emc Users" > > This is mainly directed at PCW, but after looking at this, > > > http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 > > > Will this be an acceptable handwheel to use with a 7i73? > > It says > - Required 5V+, 150mA, power for MPG > - Phase output is A ,/A and B,/B; > - TTL output, drive capability +-20mA; > > Not sure about the "TTL" part > > -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
http://www.amazon.com/Rotary-Manual-Generator-Handwheel-100PPR/dp/B00ZO6UNFM/ref=sr_1_7?ie=UTF8=1454849140=8-7=pulse+generator+cnc On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: > Just wondering if anyone has had a chance to look at this, all the units we > already have in service have a "Line Driver" type output, this says "TTL", > but they are out of stock of the ones we use, and I need one pretty quickly, > > Thanks > > Rick > > > Original Message > Subject: MPG Handwheel for use with 7i73 > From: "Rick Lair"> Date: Tue, February 2, 2016 2:01 pm > To: "Emc Users" > > This is mainly directed at PCW, but after looking at this, > > > http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 > > > Will this be an acceptable handwheel to use with a 7i73? > > It says > - Required 5V+, 150mA, power for MPG > - Phase output is A ,/A and B,/B; > - TTL output, drive capability +-20mA; > > Not sure about the "TTL" part > > -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
We do need the whole pendant, I found these same ones on eBay, with a 2-3 week delivery. The ones we normally buy are 3-4 weeks, and cost $150 plus shipping. We broke the stems off of the selector switches on one of the pendants on one of our turning centers, so I stole the unit off of our machining center temporarily. The selectors are pcb mounted, and I'm not near talented enough to unsolder the 13 little pins out of the sockets, and solder the new ones back in. Rick Original Message Subject: Re: [Emc-users] MPG Handwheel for use with 7i73 From: "John Thornton" <j...@gnipsel.com> Date: Sun, February 7, 2016 7:45 am To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Do you just need the MPG or a pendant? I thought AliExpress was for when you didn't need something in a hurry... JT On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: > Just wondering if anyone has had a chance to look at this, all the units we > already have in service have a "Line Driver" type output, this says "TTL", > but they are out of stock of the ones we use, and I need one pretty quickly, > > Thanks > > Rick > > > Original Message > Subject: MPG Handwheel for use with 7i73 > From: "Rick Lair" <r...@superiorroll.com> > Date: Tue, February 2, 2016 2:01 pm > To: "Emc Users" <emc-users@lists.sourceforge.net> > > This is mainly directed at PCW, but after looking at this, > > > http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 > > > Will this be an acceptable handwheel to use with a 7i73? > > It says > - Required 5V+, 150mA, power for MPG > - Phase output is A ,/A and B,/B; > - TTL output, drive capability +-20mA; > > Not sure about the "TTL" part > > -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
Just wondering if anyone has had a chance to look at this, all the units we already have in service have a "Line Driver" type output, this says "TTL", but they are out of stock of the ones we use, and I need one pretty quickly, Thanks Rick Original Message Subject: MPG Handwheel for use with 7i73 From: "Rick Lair"Date: Tue, February 2, 2016 2:01 pm To: "Emc Users" This is mainly directed at PCW, but after looking at this, http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 Will this be an acceptable handwheel to use with a 7i73? It says - Required 5V+, 150mA, power for MPG - Phase output is A ,/A and B,/B; - TTL output, drive capability +-20mA; Not sure about the "TTL" part -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
fwiw you could hre some needy nerd to do it for you then you'd have a needy nerd resource for next problem tomp ( im in thailand where everybody works even if its really dumb and redundant like ticket takers ticket checkers ticket passer-backers and secondary ticket checkers :-) On 02/07/2016 10:55 PM, r...@superiorroll.com wrote: > We do need the whole pendant, I found these same ones on eBay, with a 2-3 > week delivery. The ones we normally buy are 3-4 weeks, and cost $150 plus > shipping. > > We broke the stems off of the selector switches on one of the pendants on one > of our turning centers, so I stole the unit off of our machining center > temporarily. > > The selectors are pcb mounted, and I'm not near talented enough to unsolder > the 13 little pins out of the sockets, and solder the new ones back in. > > Rick > > > > -------- Original Message ---- > Subject: Re: [Emc-users] MPG Handwheel for use with 7i73 > From: "John Thornton" <j...@gnipsel.com> > Date: Sun, February 7, 2016 7:45 am > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > Do you just need the MPG or a pendant? I thought AliExpress was for when > you didn't need something in a hurry... > > JT > > On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: >> Just wondering if anyone has had a chance to look at this, all the units we >> already have in service have a "Line Driver" type output, this says "TTL", >> but they are out of stock of the ones we use, and I need one pretty quickly, >> >> Thanks >> >> Rick >> >> >> Original Message >> Subject: MPG Handwheel for use with 7i73 >> From: "Rick Lair" <r...@superiorroll.com> >> Date: Tue, February 2, 2016 2:01 pm >> To: "Emc Users" <emc-users@lists.sourceforge.net> >> >> This is mainly directed at PCW, but after looking at this, >> >> >> http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 >> >> >> Will this be an acceptable handwheel to use with a 7i73? >> >> It says >>- Required 5V+, 150mA, power for MPG >>- Phase output is A ,/A and B,/B; >>- TTL output, drive capability +-20mA; >> >> Not sure about the "TTL" part >> >> > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
On Sunday 07 February 2016 09:55:17 r...@superiorroll.com wrote: > We do need the whole pendant, I found these same ones on eBay, with a > 2-3 week delivery. The ones we normally buy are 3-4 weeks, and cost > $150 plus shipping. > > We broke the stems off of the selector switches on one of the pendants > on one of our turning centers, so I stole the unit off of our > machining center temporarily. > > The selectors are pcb mounted, and I'm not near talented enough to > unsolder the 13 little pins out of the sockets, and solder the new > ones back in. > > Rick Surely there is someone local to you that does do soldering? Some do have the "knack" and some don't. I spent 6 months trying to teach a boy/man who wanted to be my assistant how to solder back in the late '80's, something I've been doing in my sleep for about 70 years now, and failed miserably having to go back over everything myself. But he is smart & creative, so he has been our commercial production manager/editor for the last 20 years. Might lose him though, he's thrown his hat in the ring & running for County Assessor this time around. I'd offer, but my hands are beginning to get a bit shaky now. > > ---- Original Message > Subject: Re: [Emc-users] MPG Handwheel for use with 7i73 > From: "John Thornton" <j...@gnipsel.com> > Date: Sun, February 7, 2016 7:45 am > To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > > Do you just need the MPG or a pendant? I thought AliExpress was for > when you didn't need something in a hurry... > > JT > > On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: > > Just wondering if anyone has had a chance to look at this, all the > > units we already have in service have a "Line Driver" type output, > > this says "TTL", but they are out of stock of the ones we use, and I > > need one pretty quickly, > > > > Thanks > > > > Rick > > > > > > Original Message > > Subject: MPG Handwheel for use with 7i73 > > From: "Rick Lair" <r...@superiorroll.com> > > Date: Tue, February 2, 2016 2:01 pm > > To: "Emc Users" <emc-users@lists.sourceforge.net> > > > > This is mainly directed at PCW, but after looking at this, > > > > > > http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendan > >t-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm= > >2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644 > >_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_1000 > >4,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449 > >tsid=3161ee1c-584a-403d-94ec-f8a52a7c24f0 > > > > > > Will this be an acceptable handwheel to use with a 7i73? > > > > It says > > - Required 5V+, 150mA, power for MPG > > - Phase output is A ,/A and B,/B; > > - TTL output, drive capability +-20mA; > > > > Not sure about the "TTL" part > > -- > Site24x7 APM Insight: Get Deep Visibility into Application > Performance APM + Mobile APM + RUM: Monitor 3 App instances at just > $35/Month Monitor end-to-end web transactions and take corrective > actions now Troubleshoot faster and improve end-user experience. > Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > Site24x7 APM Insight: Get Deep Visibility into Application > Performance APM + Mobile APM + RUM: Monitor 3 App instances at just > $35/Month Monitor end-to-end web transactions and take corrective > actions now Troubleshoot faster and improve end-user experience. > Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] MPG Handwheel for use with 7i73
A lot of vendors twist verbiage about what is what. If it is TTL then it should be singled ended - ala - the voltage output will vary between something less than .7 volts as a low value and something above 3.7 volts as a high level. The A not will simply be the inversion of the A signal, but the signal will still vary between something less than .7 volts and something above 3.7 volts. A line driver (typically described by the line driver chip that is emulates) is usually a bipolar signal at the output and the receiver is a differential amplifier. The combo is much more noise immune than a single ended TTL type encoder output which can easily be corrupted by common mode noise.The two (line driver and ttl ) are generally not compatible. However there are chips that you can buy that will convert a TTL single ended signal to a line driver output and visa versa. Dave On 2/7/2016 9:55 AM, r...@superiorroll.com wrote: > We do need the whole pendant, I found these same ones on eBay, with a 2-3 > week delivery. The ones we normally buy are 3-4 weeks, and cost $150 plus > shipping. > > We broke the stems off of the selector switches on one of the pendants on one > of our turning centers, so I stole the unit off of our machining center > temporarily. > > The selectors are pcb mounted, and I'm not near talented enough to unsolder > the 13 little pins out of the sockets, and solder the new ones back in. > > Rick > > > > -------- Original Message ---- > Subject: Re: [Emc-users] MPG Handwheel for use with 7i73 > From: "John Thornton" <j...@gnipsel.com> > Date: Sun, February 7, 2016 7:45 am > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > Do you just need the MPG or a pendant? I thought AliExpress was for when > you didn't need something in a hurry... > > JT > > On 2/7/2016 6:28 AM, r...@superiorroll.com wrote: >> Just wondering if anyone has had a chance to look at this, all the units we >> already have in service have a "Line Driver" type output, this says "TTL", >> but they are out of stock of the ones we use, and I need one pretty quickly, >> >> Thanks >> >> Rick >> >> >> Original Message >> Subject: MPG Handwheel for use with 7i73 >> From: "Rick Lair" <r...@superiorroll.com> >> Date: Tue, February 2, 2016 2:01 pm >> To: "Emc Users" <emc-users@lists.sourceforge.net> >> >> This is mainly directed at PCW, but after looking at this, >> >> >> http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 >> >> >> Will this be an acceptable handwheel to use with a 7i73? >> >> It says >>- Required 5V+, 150mA, power for MPG >>- Phase output is A ,/A and B,/B; >>- TTL output, drive capability +-20mA; >> >> Not sure about the "TTL" part >> >> > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] MPG Handwheel for use with 7i73
This is mainly directed at PCW, but after looking at this, http://www.aliexpress.com/item/CNC-Pulse-Generator-4-Axis-MPG-Pendant-Handwheel-Emergency-Stop-for-Siemens-FAGOR-GSK/2009058806.html?spm=2114.01010208.3.1.ZvKjv2_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6449=3161ee1c-584a-403d-94ec-f8a52a7c24f0 Will this be an acceptable handwheel to use with a 7i73? It says - Required 5V+, 150mA, power for MPG - Phase output is A ,/A and B,/B; - TTL output, drive capability +-20mA; Not sure about the "TTL" part -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users