On 04.03.13 19:44, TJoseph Powderly wrote:
At the time I got your email,
I was writing oneshots for arduino,
triggered by the beginning of current flow,
an OnTimeShot runs, then a single OffTimeShot.
This makes each tiny crater a uniform size, where a
constant on/off/on/off will vary in
On 03/05/2013 02:48 AM, Erik Christiansen wrote:
Is that diameter variation with depth, and if it's due to constant
mark/space ratio, are you adjusting the timing ratio of the one-shots to
achieve compensation?
Erik, hello,
Basically, yes :)
The depth and diameter is governed by the
Jeez tomp, that thing got a flux capacitor in it yet? Hell I'd just
piss on the spark plug if I thought it would do any goodLOL that is
some deep stuff you are playing with man glad and amazed that you are able
to do it with linuxcnc. Keep on Merlin's on that is some very
On 03/04/2013 08:40 AM, sam sokolik wrote:
oops - here are the pictures of his edm work
http://electronicsam.com/images/Pete_G/edm.jpg
http://electronicsam.com/images/Pete_G/edm_xc.jpg
sam
On 3/4/2013 8:30 AM, sam sokolik wrote:
I had a little CNC get-together Saturday mainly to help
On Monday 04 March 2013 22:13:36 TJoseph Powderly did opine:
On 03/04/2013 08:40 AM, sam sokolik wrote:
oops - here are the pictures of his edm work
http://electronicsam.com/images/Pete_G/edm.jpg
http://electronicsam.com/images/Pete_G/edm_xc.jpg
sam
On 3/4/2013 8:30 AM, sam