On Wednesday 05 April 2017 13:09:36 Jon Elson wrote:
> On 04/05/2017 09:30 AM, Todd Zuercher wrote:
> > I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One
> > of which seems to be locked into staying with it because of Hardware
> > limitations (an ISA interface card). In the past
Check the motherboard for capacitors with bulged or split tops or brown leakage
around them on the PCB. If it has a fan duct or the CPU cooler covers some,
take that off so you can inspect capacitors near the CPU. Same thing for the
power supply, open it up and check its capacitors.
If it's
-
From: "John Thornton" <j...@gnipsel.com>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Sent: Wednesday, April 5, 2017 1:02:50 PM
Subject: Re: [Emc-users] Freeze Up Using Ubuntu 10.04?
Check that any fans are running ok and mb and cards
On 04/05/2017 09:30 AM, Todd Zuercher wrote:
> I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One of which
> seems to be locked into staying with it because of Hardware limitations (an
> ISA interface card). In the past week one of those machines started freezing
> up while
Check that any fans are running ok and mb and cards are clean. I've had
video card fans get dirty and stop working and freeze the pc as well as
cpu fans that fail and when the cpu overheats it just shuts down.
JT
On 4/5/2017 9:30 AM, Todd Zuercher wrote:
> I still have (had) 2 machines
s@lists.sourceforge.net>
Sent: Wednesday, April 5, 2017 10:53:11 AM
Subject: Re: [Emc-users] Freeze Up Using Ubuntu 10.04?
On 04/05/2017 08:30 AM, Todd Zuercher wrote:
> I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One
> of which seems to be locked in
On 04/05/2017 08:30 AM, Todd Zuercher wrote:
> I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One
> of which seems to be locked into staying with it because of Hardware
> limitations (an ISA interface card). In the past week one of those
> machines started
I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One of which
seems to be locked into staying with it because of Hardware limitations (an ISA
interface card). In the past week one of those machines started freezing up
while running Linuxcnc. Fortunately it wasn't the machine that