Re: [Emc-users] Trouble with 4th axis

It's an "integrated" encoder, ( 2500 ppr incremental attached to the end of the servo) here is the servo, http://www.automationdirect.com/adc/Shopping/Catalog/Motion_Control/Servo_Systems/Medium_Inertia_(1KW_-_3KW)_Servo_Systems/3KW_Servo_System_(Med_Inertia)/SVM-230 I just found the /A and /B

Re: [Emc-users] Trouble with 4th axis

On Wednesday 25 November 2015 10:35:32 Rick Lair wrote: > It's an "integrated" encoder, ( 2500 ppr incremental attached to the > end of the servo) here is the servo, > > http://www.automationdirect.com/adc/Shopping/Catalog/Motion_Control/Se

Re: [Emc-users] Trouble with 4th axis

On 25 November 2015 at 15:35, Rick Lair wrote: > I have found though, I cannot see the index-enable signal doing anything > in halscope? And I just triple checked those two little bastards. You will only see index-enable change state at the start of a

Re: [Emc-users] Trouble with 4th axis

On Wednesday 25 November 2015 08:59:45 Rick Lair wrote: > Here is a screenshot of what it looks like, after the machine has > homed itself, http://postimg.org/image/c8s8eqret/ look at the DTG of > the A axis, why does it look like this, and why would it take off as > soon as it homes itself, to

Re: [Emc-users] Trouble with 4th axis

better (but maybe backwards) you may want to switch > the wiring of your encoder feed back to switch direction. > > - Original Message - > From: r...@superiorroll.com > To: "Emc Users" <emc-users@lists.sourceforge.net> > Sent: Tuesday, November 24, 2015 2:2

Re: [Emc-users] Trouble with 4th axis

Here is a screenshot of what it looks like, after the machine has homed itself, http://postimg.org/image/c8s8eqret/ look at the DTG of the A axis, why does it look like this, and why would it take off as soon as it homes itself, to some random position, like the one shown, at MAX_VELOCITY? To

Re: [Emc-users] Trouble with 4th axis

To: "Emc Users" <emc-users@lists.sourceforge.net> Sent: Tuesday, November 24, 2015 2:23:54 PM Subject: [Emc-users] Trouble with 4th axis Hello guys, working on my 4th axis, and I am starting to feel quite lost, I was figuring that this would be the easier of all the other

[Emc-users] Trouble with 4th axis

Hello guys, working on my 4th axis, and I am starting to feel quite lost, I was figuring that this would be the easier of all the other work I have done with this stuff, due to working with a brand spanking new servo and drive, but has turned into a nightmare for me. I have the axis