ced Machine Controller (EMC)"
>> Subject: Re: [Emc-users] mesa 5i25 install woes (fwd)
>>
>> On Tue, 28 Feb 2012, Viesturs Lcis wrote:
>>
>>> 2012/2/28 :
>>>>
>>>> '/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No
Richard,
this looks to me as if the card shortened the PC data bus partially. The
PCI contacts are very narrow spaced and may almost overlap in height.
Are you sure that the card is inserted correctly and pressed down fully
to the bottom of the socket? Did you try a different socket and a
diffe
On Wed, 29 Feb 2012, kqt4a...@gmail.com wrote:
> Date: Wed, 29 Feb 2012 04:58:32 -0600 (CST)
> From: kqt4a...@gmail.com
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] mesa 5i25
I'd contact Peter at Mesa
Interfering with the hard drive seems like a very odd problem.
Dave
On 2/29/2012 5:58 AM, kqt4a...@gmail.com wrote:
> On Tue, 28 Feb 2012, Viesturs Lācis wrote:
>
>> 2012/2/28 :
>>>
>>> '/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such
>>> device
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 :
'/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such device
My unqualified guess is that 5i25 card is not recognized.
I will leave this for more knowledgeable users to comment.
Do You have a chance to attach the HDD and 5
2012/2/28 sam sokolik :
> Viesturs
>
> You must have a
>
> firmware=whatever.bit
>
> somewhere... Could it be in your hal file? Otherwise I don't think it will
> work..
No, 5i25 is different from other Mesa pci cards, the firmware is
loaded and stored right in the card. When I purchased my 5
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 :
'/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such device
My unqualified guess is that 5i25 card is not recognized.
I will leave this for more knowledgeable users to comment.
Do You have a chance to attach the HDD and 5
Is your PC now finding the 5i25 card when you do lspci ??
If not, you will never get anything to load onto the card since the PC
doesn't recognize that the card exists.
If lspci doesn't show the card you should probably try the card in a
different PC and see if the OS recognizes the card.
Dave
Viesturs
You must have a
firmware=whatever.bit
somewhere... Could it be in your hal file? Otherwise I don't think it will
work..
On 2/28/2012 1:41 PM, Viesturs Lācis wrote:
> 2012/2/28:
>> On Tue, 28 Feb 2012, Viesturs Lācis wrote:
>>
>>> 2012/2/28:
Now I have CONFIG=""
>>>
>>>
2012/2/28 :
>
> '/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such device
My unqualified guess is that 5i25 card is not recognized.
I will leave this for more knowledgeable users to comment.
Do You have a chance to attach the HDD and 5i25 to another motherboard
for a test to see,
2012/2/28 :
> On Tue, 28 Feb 2012, Viesturs Lācis wrote:
>
>> 2012/2/28 :
>>>
>>>
>>> Now I have CONFIG=""
>>
>>
>> And that is it? No stepgens or pwmgens or encoder modules loaded?
>>
>> Paste Your INI and HAL files somewhere for public review.
>>
>
> No, I only changed the config line as I unde
On Tue, 28 Feb 2012, sam sokolik wrote:
> wow - sorry about that
>
> [HOSTMOT2]
> DRIVER=hm2_pci
> BOARD=5i23
> CONFIG="firmware=hm2/5i23/SVST8_4.BIT num_encoders=0 num_pwmgens=0
> num_stepgens=3"
>
> should be
>
> [HOSTMOT2]
> DRIVER=hm2_pci
> BOARD=5i25
> CONFIG="num_encoders=0 num_pwmgens=0 num
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 :
Now I have CONFIG=""
And that is it? No stepgens or pwmgens or encoder modules loaded?
Paste Your INI and HAL files somewhere for public review.
No, I only changed the config line as I understood you to say
Richard# ###
wow - sorry about that
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i23
CONFIG="firmware=hm2/5i23/SVST8_4.BIT num_encoders=0 num_pwmgens=0
num_stepgens=3"
should be
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i25
CONFIG="num_encoders=0 num_pwmgens=0 num_stepgens=3"
From what I understand.
On 02/28/2012 01:24 PM, s
I think you need to re-read this...
2) remove the "firmware = [path/to/firmware/file]" part of the "config ="
line, keep any commands for loading stepgens, pwmgens or encoder
modules, if they are needed for Your machine.
I read that as...
DRIVER=hm2_pci
B
OARD=5i23
C
ONFIG="firmware=hm2/5i2
2012/2/28 :
>
> Now I have CONFIG=""
And that is it? No stepgens or pwmgens or encoder modules loaded?
Paste Your INI and HAL files somewhere for public review.
Viesturs
--
Keep Your Developer Skills Current with Learn
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 :
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards in INI or HAL files.
Could You, please, explain, what kind of address You mean?
In my .hal f
17 matches
Mail list logo
