Date: Sun, 20 Nov 2011 16:18:09 -0800
From: dengv...@charter.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] tool changer question
On Mon, 14 Nov 2011 16:06:54 +0330
Farzin Kamangar farzin.kaman...@gmail.com wrote:
Hello, dear EMC users;
Considering the tool
On Wednesday, November 23, 2011 02:45:44 PM Sam sokolik did opine:
You were going to write something, Sam?
Date: Sun, 20 Nov 2011 16:18:09 -0800
From: dengv...@charter.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] tool changer question
On Mon, 14 Nov 2011 16:06:54
On Mon, 14 Nov 2011 16:06:54 +0330
Farzin Kamangar farzin.kaman...@gmail.com wrote:
Hello, dear EMC users;
Considering the tool changing process, is there a way to send
some movement commands from PLC to CNC?
I have entered the TOOL_CHANGE_POSITION and TOOL_CHANGE_QUILL_UP in
the INI
dave wrote:
Some years ago a group of emcer's converted a Mazak V5 to emc. Lots of
information is available in the wiki, logs, logic, etc but I cannot
find an entry on the classicladder code (for tool change), etc. Maybe
someone else can help here.
Every EMC2 install should have the CL
Hello, dear EMC users;
Considering the tool changing process, is there a way to send some
movement commands from PLC to CNC?
I have entered the TOOL_CHANGE_POSITION and TOOL_CHANGE_QUILL_UP in the INI
file and in the EMCIO section. This is fine and causes the tool go to the
tool change
On Monday, November 14, 2011 08:06:29 AM Farzin Kamangar did opine:
Hello, dear EMC users;
Considering the tool changing process, is there a way to send some
movement commands from PLC to CNC?
I have entered the TOOL_CHANGE_POSITION and TOOL_CHANGE_QUILL_UP in the
INI file and in the
Farzin,
an alternate route would be to use an M6 remapped to a o-word procedure, which
is now in master.
For an example, see
On Mon, 2011-11-14 at 16:06 +0330, Farzin Kamangar wrote:
... snip
I was wondering how these actions could be done without using subroutine
calls in the Gcode? Please
let me know if I am not clear enough.
... snip
I use HAL comps for my changers. My lathe has a simple one:
2011/11/14 Farzin Kamangar farzin.kaman...@gmail.com:
Hello, dear EMC users;
Considering the tool changing process, is there a way to send some
movement commands from PLC to CNC?
How about using PLC part of EMC2 - ClassicLadder? It seems to me that
this would perfectly fit Your intended
On Mon, 2011-11-14 at 16:06 +0330, Farzin Kamangar wrote:
Hello, dear EMC users;
Considering the tool changing process, is there a way to send some
movement commands from PLC to CNC?
I'm not familiar with PLC's but they should at the very least have pins
that can set or clear bits. You
10 matches
Mail list logo