Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 21:25:08 Ken Strauss wrote:

> Now they are $34.75 ($347.50 for 10) for ER20. On the other hand they
> arrive quickly, seem good quality and shipping (in the US) is $17.74
> for 10.
>
I went back and looked again. $34.75 is still nearly 3x what these I use 
now cost. Quality, accuracy diffs remain TBD, if you've the stuff to 
measure it. I'd certainly expect Tormods stuff to meet or exceed the 
normal tolerances for that.  Most such measurements are ignored here as 
I quite often get the TLO from a conact pad on the table, and touch off 
to that so any diffs in the tool mount are moot as long as it doesn't 
walk out of the collet. They do have that tendency if working the tool 
to its normal capacity.

Thanks Ken.

> > -Original Message-
> > From: Gene Heskett [mailto:ghesk...@shentel.net]
> > Sent: Saturday, April 07, 2018 8:03 PM
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] TTS style toolholders
> >
> > On Saturday 07 April 2018 19:17:23 Ken Strauss wrote:
> > > Tormach has reduced the costs from their original prices. With the
> > > higher prices + shipping costs + questionable quality on eBay I
> > > have recently ordered mine from Tormach.
> >
> > The last time I looked at the Tormach site, their prices were pretty
>
> scary.
>
> > Where are they for 10 of them now?  I have one of theirs now, and I
> > rather liked it.
> >
> > --
> > Cheers, Gene Heskett
> > --
> > "There are four boxes to be used in defense of liberty:
> >  soap, ballot, jury, and ammo. Please use in that order."
> > -Ed Howdershelt (Author)
> > Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> --
>-- --
>
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
> --
> Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Ken Strauss]

Now they are $34.75 ($347.50 for 10) for ER20. On the other hand they arrive
quickly, seem good quality and shipping (in the US) is $17.74 for 10.

> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: Saturday, April 07, 2018 8:03 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] TTS style toolholders
>
> On Saturday 07 April 2018 19:17:23 Ken Strauss wrote:
>
> > Tormach has reduced the costs from their original prices. With the
> > higher prices + shipping costs + questionable quality on eBay I have
> > recently ordered mine from Tormach.
>
> The last time I looked at the Tormach site, their prices were pretty
scary.
> Where are they for 10 of them now?  I have one of theirs now, and I rather
> liked it.
>
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>

--
> Check out the vibrant tech community on one of the world's most engaging
> tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 19:17:23 Ken Strauss wrote:

> Tormach has reduced the costs from their original prices. With the
> higher prices + shipping costs + questionable quality on eBay I have
> recently ordered mine from Tormach.

The last time I looked at the Tormach site, their prices were pretty 
scary. Where are they for 10 of them now?  I have one of theirs now, and 
I rather liked it.

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 19:02:54 Ken Strauss wrote:

> ER16
> https://www.ebay.ca/itm/wholesales-10pcs-C3-4-ER16-1-38-Straight-colle
>t-chuc k-holder-CNC-Milling-Lathe-/162336054811
>
> ER20
> https://www.ebay.ca/itm/New-5pcs-C3-4-ER20-1-38-Collet-Chuck-Straight-
>Collet -Chuck-CNC-Milling-Lathe-/282305551099
>
> ER25
> https://www.ebay.ca/itm/new-10pcs-C3-4-ER25-1-38L-collet-chuck-holder-
>CNC-Mi lling-and-1pcs-Wrench-/282406689535
>
> ER32
> https://www.ebay.ca/itm/New-5pcs-C3-4-ER32-1-38L-collet-chuck-holder-C
>NC-Mil ling-and-1pcs-Wrench-/162336042034
>
> > -Original Message-
> > From: Gene Heskett [mailto:ghesk...@shentel.net]
> > Sent: Saturday, April 07, 2018 6:55 PM
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] TTS style toolholders
> >
> > On Saturday 07 April 2018 18:22:16 andy pugh wrote:
> > > On 7 April 2018 at 23:11, Gene Heskett  
wrote:
> > > > What has happened to the chinese (or korean) TTS tool holders?,
> > > > there are NONE for sale on ebay tonight.
> > >
> > > https://www.ebay.com/sch/Business-
> >
> > Industrial/12576/i.html?_from=R40&_n
> >
> > >kw=C3%2F4
> >
> > Looks like I get some bigger R8-ER32 adaptors to use those collets,
> > it was actually ER20's I was looking for. And no ER-20's at the link
> > above.
> >
> >
> > I'll go back and look some more. And there still aren't any. TTS
> > tool holder gets me shelving to store TTS stuffs, but no
> > toolholders.
> >
> > WTH?
> >
Finally found some different ones that should work. Delivery could be the 
middle of May though. Gr. Each adaptor comes with a 1-13mm collet 
kit, and I needed both. No clue where they rolled off to, but my 4-5-6 
collets can't be found in that midden heap.  

But when it warms up again, if it ever does, I'm side-tracked making a 
KREG style drill to counterbore some treated 4x4"'s, need to plant 3 of 
them about 2' tall, drop a post case and top over it, after toe screwing 
it to the decking & mount some of that fat plastic railing on it for a 
safety rail of sorts to prevent a runaway wheelchair from rolling over 
the edge of the decking and onto the ramp, which would probably spill my 
lady and break more of her paper mache bones. The washer heads of the 
screws are around 5/8" in diameter, and need to be sunk into the wood, 
kreg screw style, far enough to let the post sleeve pass.

The post covers I don't figure need to be a full 52" tall, so 2 foot of 
treated 4x4 in the bottom should be sufficient to stand them up straight 
and fairly solidly.  These screws, toe screwed into the 2x4 flooring are 
all the holddown they'll get.

> > --
> > Cheers, Gene Heskett
> > --
> > "There are four boxes to be used in defense of liberty:
> >  soap, ballot, jury, and ammo. Please use in that order."
> > -Ed Howdershelt (Author)
> > Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> --
>-- --
>
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
> --
> Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 18:58:26 andy pugh wrote:

> On 7 April 2018 at 23:55, Gene Heskett  wrote:
> > Looks like I get some bigger R8-ER32 adaptors to use those collets,
> > it was actually ER20's I was looking for. And no ER-20's at the link
> > above.
>
> Yes there are. Possibly not on the first page.
>
> https://www.ebay.com/sch/i.html?&_nkw=C3%2F4+ER20
>
> Just search for C3/4 and ER20

Thanks Andy, found what I wanted as a $32 combo pack. Slow ship though, 
might be 5 weeks!  That slow makes the far eastern stuff a bit less 
appetizing.  And these adapters do not have the tool length registration 
collar either. So little no chance of ever using them in a tool changer.

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Ken Strauss]

Tormach has reduced the costs from their original prices. With the higher
prices + shipping costs + questionable quality on eBay I have recently
ordered mine from Tormach.

> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: Saturday, April 07, 2018 7:04 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] TTS style toolholders
>
> On Saturday 07 April 2018 18:48:59 Ken Strauss wrote:
>
> > https://www.ebay.ca/itm/New-5pcs-C3-4-ER20-A-1-38-Collet-Chuck-Straigh
> >t-Coll et-Chuck-CNC-Milling-Lathe/282305551099
> >
> >
> > https://www.ebay.ca/itm/New-10pcs-C3-4-ER20A-1-38-Collet-Chuck-
> Straigh
> >t-Coll et-Chuck-CNC-Milling-Lathe/162336059658
> >
> This one is the item, but the price has gone up, shipping is outrageous at
$50.
> Thinking. Thanks Ken.
>
> > > -Original Message-
> > > From: Gene Heskett [mailto:ghesk...@shentel.net]
> > > Sent: Saturday, April 07, 2018 6:12 PM
> > > To: emc-users@lists.sourceforge.net
> > > Subject: [Emc-users] TTS style toolholders
> > >
> > > Greetings guy;
> > >
> > > What has happened to the chinese (or korean) TTS tool holders?,
> > > there are NONE for sale on ebay tonight. I thought I'd get 10 more
> > > of them to go
> >
> > with the
> >
> > > 2 pack of 19 ea metric collets I just bought since its handy to have
> > > them preloaded and ready to go.
> > >
> > > Thanks for any leads at a comparable price ($160/10 pack IIRC) that
> > > we
> >
> > bought
> >
> > > them for about 2 or 3 years ago.
> > > --
> > > Cheers, Gene Heskett
> > > --
> > > "There are four boxes to be used in defense of liberty:
> > >  soap, ballot, jury, and ammo. Please use in that order."
> > > -Ed Howdershelt (Author)
> > > Genes Web page <http://geneslinuxbox.net:6309/gene>
> >
> > --
> >-- --
> >
> > > Check out the vibrant tech community on one of the world's most
> > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > > ___
> > > Emc-users mailing list
> > > Emc-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
> > --
> > Check out the vibrant tech community on one of the world's
> >most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
>
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>

--
> Check out the vibrant tech community on one of the world's most engaging
> tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 18:48:59 Ken Strauss wrote:

> https://www.ebay.ca/itm/New-5pcs-C3-4-ER20-A-1-38-Collet-Chuck-Straigh
>t-Coll et-Chuck-CNC-Milling-Lathe/282305551099
>
>
> https://www.ebay.ca/itm/New-10pcs-C3-4-ER20A-1-38-Collet-Chuck-Straigh
>t-Coll et-Chuck-CNC-Milling-Lathe/162336059658
>
This one is the item, but the price has gone up, shipping is outrageous 
at $50. Thinking. Thanks Ken.

> > -Original Message-
> > From: Gene Heskett [mailto:ghesk...@shentel.net]
> > Sent: Saturday, April 07, 2018 6:12 PM
> > To: emc-users@lists.sourceforge.net
> > Subject: [Emc-users] TTS style toolholders
> >
> > Greetings guy;
> >
> > What has happened to the chinese (or korean) TTS tool holders?,
> > there are NONE for sale on ebay tonight. I thought I'd get 10 more
> > of them to go
>
> with the
>
> > 2 pack of 19 ea metric collets I just bought since its handy to have
> > them preloaded and ready to go.
> >
> > Thanks for any leads at a comparable price ($160/10 pack IIRC) that
> > we
>
> bought
>
> > them for about 2 or 3 years ago.
> > --
> > Cheers, Gene Heskett
> > --
> > "There are four boxes to be used in defense of liberty:
> >  soap, ballot, jury, and ammo. Please use in that order."
> > -Ed Howdershelt (Author)
> > Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> --
>-- --
>
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
> --
> Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Ken Strauss]

ER16
https://www.ebay.ca/itm/wholesales-10pcs-C3-4-ER16-1-38-Straight-collet-chuc
k-holder-CNC-Milling-Lathe-/162336054811

ER20
https://www.ebay.ca/itm/New-5pcs-C3-4-ER20-1-38-Collet-Chuck-Straight-Collet
-Chuck-CNC-Milling-Lathe-/282305551099

ER25
https://www.ebay.ca/itm/new-10pcs-C3-4-ER25-1-38L-collet-chuck-holder-CNC-Mi
lling-and-1pcs-Wrench-/282406689535

ER32
https://www.ebay.ca/itm/New-5pcs-C3-4-ER32-1-38L-collet-chuck-holder-CNC-Mil
ling-and-1pcs-Wrench-/162336042034


> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: Saturday, April 07, 2018 6:55 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] TTS style toolholders
>
> On Saturday 07 April 2018 18:22:16 andy pugh wrote:
>
> > On 7 April 2018 at 23:11, Gene Heskett  wrote:
> > > What has happened to the chinese (or korean) TTS tool holders?,
> > > there are NONE for sale on ebay tonight.
> >
> > https://www.ebay.com/sch/Business-
> Industrial/12576/i.html?_from=R40&_n
> >kw=C3%2F4
>
> Looks like I get some bigger R8-ER32 adaptors to use those collets, it was
> actually ER20's I was looking for. And no ER-20's at the link above.
>
>
> I'll go back and look some more. And there still aren't any. TTS tool
> holder gets me shelving to store TTS stuffs, but no toolholders.
>
> WTH?
>
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>

--
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[andy pugh]

On 7 April 2018 at 23:55, Gene Heskett  wrote:

> Looks like I get some bigger R8-ER32 adaptors to use those collets, it
> was actually ER20's I was looking for. And no ER-20's at the link above.

Yes there are. Possibly not on the first page.

https://www.ebay.com/sch/i.html?&_nkw=C3%2F4+ER20

Just search for C3/4 and ER20

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Gene Heskett]

On Saturday 07 April 2018 18:22:16 andy pugh wrote:

> On 7 April 2018 at 23:11, Gene Heskett  wrote:
> > What has happened to the chinese (or korean) TTS tool holders?,
> > there are NONE for sale on ebay tonight.
>
> https://www.ebay.com/sch/Business-Industrial/12576/i.html?_from=R40&_n
>kw=C3%2F4

Looks like I get some bigger R8-ER32 adaptors to use those collets, it 
was actually ER20's I was looking for. And no ER-20's at the link above.


I'll go back and look some more. And there still aren't any. TTS tool 
holder gets me shelving to store TTS stuffs, but no toolholders.

WTH?

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[Ken Strauss]

https://www.ebay.ca/itm/New-5pcs-C3-4-ER20-A-1-38-Collet-Chuck-Straight-Coll
et-Chuck-CNC-Milling-Lathe/282305551099


https://www.ebay.ca/itm/New-10pcs-C3-4-ER20A-1-38-Collet-Chuck-Straight-Coll
et-Chuck-CNC-Milling-Lathe/162336059658

> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: Saturday, April 07, 2018 6:12 PM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] TTS style toolholders
>
> Greetings guy;
>
> What has happened to the chinese (or korean) TTS tool holders?, there are
> NONE for sale on ebay tonight. I thought I'd get 10 more of them to go
with the
> 2 pack of 19 ea metric collets I just bought since its handy to have them
> preloaded and ready to go.
>
> Thanks for any leads at a comparable price ($160/10 pack IIRC) that we
bought
> them for about 2 or 3 years ago.
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>

--
> Check out the vibrant tech community on one of the world's most engaging
> tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] TTS style toolholders

[andy pugh]

On 7 April 2018 at 23:11, Gene Heskett  wrote:

> What has happened to the chinese (or korean) TTS tool holders?, there are
> NONE for sale on ebay tonight.

https://www.ebay.com/sch/Business-Industrial/12576/i.html?_from=R40&_nkw=C3%2F4



-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] TTS style toolholders

[Gene Heskett]

Greetings guy;

What has happened to the chinese (or korean) TTS tool holders?, there are 
NONE for sale on ebay tonight. I thought I'd get 10 more of them to go 
with the 2 pack of 19 ea metric collets I just bought since its handy to 
have them preloaded and ready to go.

Thanks for any leads at a comparable price ($160/10 pack IIRC) that we 
bought them for about 2 or 3 years ago. 
-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users