thanks Andy
07.05.2021 14:49, andy pugh пишет:
On Fri, 7 May 2021 at 12:27, nkp216 wrote:
addf switchZA.0 servo-thread
...
can a component cause problems for stepper motors - they are jerky
Your switch would need to run in the base-thread to transfer steps
directly.
I am not 100%
On Fri, 7 May 2021 at 12:27, nkp216 wrote:
addf switchZA.0 servo-thread
...
> can a component cause problems for stepper motors - they are jerky
Your switch would need to run in the base-thread to transfer steps
directly.
I am not 100% clear on what you want to do, but would it work to
the machine works with a parallel port
it is required to switch outputs from stepgens depending on the tool number:
M6T1 - axis Z worked,
M6T2 - axis A worked,
M6T0 - both axes worked simultaneously
the component was written :
component switchZA "switch spindle Z A";
pin in bit stepz
