At the network ID (Alias) prompt, ask him to type in his smtp address
instead, and then enter his userid and password. Any luck after that?
Cheers,
Tony
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, November 21, 2003 10:16 AM
To: Exchange Discussions
Any of your users using Outlook 2003? If so, there's a patch...
http://support.microsoft.com/default.aspx?scid=kb;[LN];818709
I had this exact same problem and this fixed it. I haven't had to restart
OWA since.
Cheers,
Tony
-Original Message-
From: Dolphin, Jeff [mailto:[EMAIL
-
From: Tony Hlabse [mailto:[EMAIL PROTECTED]
Posted At: 28 October 2003 20:39
Posted To: Swynk Exchange (30 days)
Conversation: Exch 5.5 Routing Question
Subject: Re: Exch 5.5 Routing Question
I believe the Qwart file takes care of that in 5.5 which was elliminated in
2000.
From: Woods, Tony
I had a budget to work with, did all kinds of research until I found out we
had the Enterprise License for SAV products... This meant that I was already
licensed for SAV for SMTP Gateways, which does SPAM, Attachaments, virus
scanning, subject blocking and DNSBL's too. My point being that maybe
Hello,
Exchange 5.5 SP4 on W2K SP4 boxes. 1 ORG, 3 Sites (A, B, C) in three
different cities across N.A.
I have 2 x400 connectors setup in each location. Each site is setup the same
in that they all have two x400 connectors, each going to one of the other
sites. If the VPN link between Site A
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Friday, October 17, 2003 4:43 PM
To: Exchange Discussions
Subject: .STF files keep building
Hello,
W2K SP3 with Exchange 5.5 SP4
I have a lot of .stf files being created in the C:\exchsrvr\mdbdata dir.
Anyone know
Hello,
Exchange 5.5 SP4 on W2K SP3
This might be dumb but is there a way to force the IMS on Exchange to only
accept mail from a certain IP address? I have two MX records, one going to
our SPAM box with Cost of 10 and the other to our Exchange box with cost of
100 as fail over. The Exchange box
the world from PSTs and Bricked Backups!T
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Woods, Tony
Sent: Tuesday, October 21, 2003 1:42 PM
To: Exchange Discussions
Subject: Forcing IMS
Hello,
Exchange 5.5 SP4 on W2K SP3
This might be dumb
Hello,
W2K SP3 with Exchange 5.5 SP4
I have a lot of .stf files being created in the C:\exchsrvr\mdbdata dir.
Anyone know what is causing this? The only change is that as of this am, I
now have SAV SMTP for Gateways in front of our box accepting and delivering
email for the @moneymart.ca domain.
Hello,
NT 4 SP6a Exch 5.5 SP4 NAV for Exch 2.18
With the attachment blocking in NAV, is it possible to exclude certain files
by exact file name? We have Faxination here and it's forms call two exe's to
produce the forms. Their support said that Antigen and/or Trend have the
ability to exclude
this ability in NAV for Exchange.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Friday, September 05, 2003 1:53 PM
To: Exchange Discussions
Subject: Another NAV for Exchange Question
Hello,
NT 4 SP6a Exch 5.5 SP4 NAV for Exch 2.18
With the attachment blocking in NAV
Hi,
Outlook 2002 SP-2
I have a user who's icon's never change when they forward or reply to the
email message. When a new one comes in, it's the envelope. When she opens
it, it becomes the opened envelope. But if she replies, it never changes to
show the purple arrow. If she forwards, it never
reason I suggested RAR was I
knew NAV can't read it, so it would allow it through.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 27, 2003 16:44
To: Exchange Discussions
Subject: RE: NAV Blocking ZIP files
Well I found this
(http://service1
-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 28, 2003 08:50
To: Exchange Discussions
Subject: RE: NAV Blocking ZIP files
Yes, I did run that and I have the same build. The key in question is
AllowEncryptedArchives, correct? I set it to both 1 (it was already set
Hello, Exchange 5.5 SP4 on mix of NT 4 and w2k boxes.
I recently put the reg tweaks in for Martin's List of Danger attachments
using NAV 2.x for Exchange and have noticed that even though a ZIP file is
not listed in my list, the .exe's and .bat's...etc inside them are getting
quarantined. This is
Blocking ZIP files
That is the nature of it. I don't belief that NAV checks the mime time so an
option would be to rename them i.e. .ex_ .ba_ etc. The other option is to
password protect the Zip files and then they will not be scanned.
-Dave Vantine
-Original Message-
From: Woods, Tony [mailto
Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 27, 2003 15:40
To: Exchange Discussions
Subject: RE: NAV Blocking ZIP files
So if I tell them to password protect the zip files, they will be left
alone? That would be good enough for me I think.
Cheers,
Tony
encrypted files, turn off that too. Or
go with RAR, I don't think NAV can read RAR's :)
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 27, 2003 15:26
To: Exchange Discussions
Subject: NAV Blocking ZIP files
Hello, Exchange 5.5 SP4 on mix of NT 4
Hello,
Just wondering if anyone in the group can recommend a piece of software to
run in conjunction with Exchange 2000. Maybe there's a product that doesn't
need to run with Exchange but I'm just looking for what others are using and
if they're happy with it.
Cheers,
Tony
Hi all, Exchange 5.5 SP4 on W2K SP3.
Every 10 seconds and up to every 2mins I get the following entry in the
Application Event Log:
ID: 41
Source: MSExchangeDSExp
Starting the directory export.
And then one second later...
ID: 38
Source: MSexchangeDSExp
The directory export is complete.
. Seielstad - MTS MCSE MS-MVP
Sr. Systems Administrator
Inovis Inc.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 1:03 PM
To: Exchange Discussions
Subject: RE: Monitoring DL Usage
Ya, I thought about that one but I thought there might
Hello,
I would like to monitor the use of our many DL's to see if they're even
being used. Does anyone have any recommendations on how to go about this?
A search of KB's didn't turn up anything but I might not have used the
right query syntax.
Cheers,
Tony
Usage
Add yourself to all of the DLs and see how often you get mail.
From: Woods, Tony [EMAIL PROTECTED]
Reply-To: Exchange Discussions [EMAIL PROTECTED]
Date: Wed, 6 Aug 2003 09:39:43 -0700
To: Exchange Discussions [EMAIL PROTECTED]
Subject: Monitoring DL Usage
Hello,
I would like
you want to spend and how do you want the reports to run
manually/auto if so daily/weekly. Which version of Exchange and what is your
configuration. Are any of the DL personal?
From: Woods, Tony [EMAIL PROTECTED]
Reply-To: Exchange Discussions [EMAIL PROTECTED]
To: Exchange Discussions [EMAIL
of
reporting.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 1:15 PM
To: Exchange Discussions
Subject: RE: Monitoring DL Usage
I actually was just asking what people might be using and would/could
recommend. I don't remember asking anyone to research
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Woods, Tony Posted
At: Tuesday, July 22, 2003 12:18 PM Posted To: Exchange Discussion List
Conversation: OWA Error
Subject: RE: OWA Error
Sorry, I misunderstood where you were going with this. Getting into OWA is
fine
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Woods, Tony Posted
At: Tuesday, July 22, 2003 12:18 PM Posted To: Exchange Discussion List
Conversation: OWA Error
Subject: RE: OWA Error
Sorry, I misunderstood where you were going with this. Getting into OWA is
fine. It's the changing the password once
). If it is, change it to 0 and see if it resolves the issue.
Jeff
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Woods, Tony Posted
At: Wednesday, July 23, 2003 9:33 AM Posted To: Exchange Discussion List
Conversation: OWA Error
Subject: RE: OWA Error
Alright, cool so that worked. Kinda bites because that's one of our Account
Policies that was set by our security committee so I'll take this one back
to them. Thanks again.
Cheers,
Tony
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 23, 2003 9:07
If you're doing an inplace upgrade, Exchange will function as normal. You'll
want to do some research on the ADC...etc
Cheers,
Tony
-Original Message-
From: Bridges, Samantha [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 23, 2003 11:53 AM
To: Exchange Discussions
Subject: Exchange
\username in the account
field or use the upn logon.
Jeff
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Woods, Tony Posted
At: Monday, July 21, 2003 1:54 PM Posted To: Exchange Discussion List
Conversation: OWA Error
Subject: OWA Error
Hi again,
Exchange
Discussions
Subject: Re: OWA Error
Think smtp address instead of UPN and it isn't.
- Original Message -
From: Woods, Tony [EMAIL PROTECTED]
To: Exchange Discussions [EMAIL PROTECTED]
Sent: Tuesday, July 22, 2003 10:40 AM
Subject: RE: OWA Error
Hi,
I've tried that as well and still no go
Message-
From: Missy Koslosky [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 22, 2003 10:13 AM
To: Exchange Discussions
Subject: Re: OWA Error
I'm saying that you can logon to OWA using your SMTP address. That simple.
- Original Message -
From: Woods, Tony [EMAIL PROTECTED]
To: Exchange
Hello all,
W2K SP3 w/ Exchange 5.5 SP4 and OWA on the same box
I've loaded a test cert from Thawte and when I log into
https://server/logon.asp https://server/logon.asp , go to Options and
Change Password, I get the 404 file not found. I've created the virtual
dir within the IS Mgr
Hi All,
Just to update, this is now fixed. The IIS URLScan tool was causing the
grief. I uninstalled it and now it's working as expected.
Cheers,
Tony
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Monday, July 21, 2003 7:30 AM
To: Exchange Discussions
Subject
Hi again,
Exchange 5.5 SP4 on W2K SP3.
Now that I've sorted out the Change Password option, it's returning an error
when you submit. I fill in the info for Domain, Account, old, new and
confirm passwords and it says Error number: -2147023569 . Then there's a
link that says 'Back' so that you can
Hello,
Exchange 5.5 SP3 on NT 4 SP6a
I've just found out that POP3 doesn't work on my dfg.com domain. From the
command line, internally, I type telnet mail.dfg.com 110 it just sits
there and hangs. Alternatively, if I do the same for mail.moneymart.ca, it
connects immediately. Again, this is
5.5 environment or the mailbox server itself (i.e. Should you expect it
to be listening)?
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Posted At: Wednesday, July 09, 2003 4:54 PM
Posted To: swynk
Conversation: POP3 Broken?
Subject: POP3 Broken?
Hello,
Exchange 5.5 SP3
/Preventing_Third_Party_Relaying_In_MS_Ex
change_Server_55.html.
- Dave
- Original Message -
From: Woods, Tony [EMAIL PROTECTED]
To: Exchange Discussions [EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 5:00 PM
Subject: RE: Not Open Relay, but...
Hi John,
Is this in response to my question #3? If so, does everyone receive
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 9:58 AM
To: Exchange Discussions
Subject: RE: Not Open Relay, but...
I've tested via telnet and from home using Outlook Express and it always
replies with 550 so I think I'm good there. Just the amount
(Jim) [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 1:30 PM
To: Exchange Discussions
Subject: RE: Not Open Relay, but...
They're just using dfg.com. Don't bother your MX record.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 1:37 PM
address. Make sense? There's not much you can do with Exchange 5.5 to
avoid this situation unless the spammer is using a single IP address that
you can block from being able to send mail into your system.
- Dave
- Original Message -
From: Woods, Tony [EMAIL PROTECTED]
To: Exchange
Hello,
NT 4 SP6a and Exchange 5.5 SP4. Domain in question is DFG.com
I've just taken over a site's Exchange server and have noticed something
strange. It's been sometime since I had to play with Exchange this deep but
the Queues on my IMS keep filling up with 1000's of emails. We're not an
Open
: Not Open Relay, but...
NDR's (non-delivery reports) from spammer's probably.
-Original Message-
From: Woods, Tony [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 3:23 PM
To: Exchange Discussions
Subject: Not Open Relay, but...
Hello,
NT 4 SP6a and Exchange 5.5 SP4. Domain
Try starting Outlook with the /cleanfreebusy switch
Cheers,
Tony
-Original Message-
From: Rama Arumugam [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 18, 2002 9:06 AM
To: Exchange Discussions
Subject: RE: Free/busy error
2 months.
Rama Arumugam
Network Administrator
(253)
Hi all,
This is a post on behalf of a friend. Any help would be most appreciated.
~
I recently upgraded to Exchange 2000 and installed McAfee Groupshield
version 5.1.0. It was my practice with the old Groupshield to block exe
attachments and I set the new
Hi all,
We are in the process of planning the migration to Exchange 5.5 from
Netscape Mail 4.7. I'm wondering what processes there might be to getting
their old mail onto the Exchange server, besides getting it into Outlook
Express and then importing that into Outlook 2002. We know we can add
. On the server or on their desktops e.i. pst's?
- Original Message -
From: Woods, Tony G AG:EX [EMAIL PROTECTED]
To: Exchange Discussions [EMAIL PROTECTED]
Sent: Friday, November 02, 2001 1:07 PM
Subject: Migrating Netscape Mail to Exchange
Hi all,
We are in the process of planning
48 matches
Mail list logo
