Tis a bit of a minor flaw in 7.1 that the graphics installer
doesn't complain much.
I have seen "My computer resets right after 'in second stage
install'"
"freezes at selecting the mouse"
or "refuses to boot"
or "Shows the opening screen and resets"
I reproduced each of these errors last nig
I would if I could. Tried is just now and the link (at the top of
http://www.linux-mandrake.com/en/ )timed out.
Will definately try again, though.
Bill
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Civileme
> Sent: Friday, June 16, 2000 4:45 PM
Well, that depend on how you set up a regular NIC, I guess.
I set up my PCMCIA by hand using the scripts from RedHat 6.0 or so, but
this is not the "Mandrake way."
Basically, when you plug the PCMCIA in, it should be set up as eth0; you
just have to configure eth0 using whatever GUI Mandrake su
When you run lilo and is says:
Warning: /dev/hdb is not on the first disk
it is telling you "I will write the boot program to /dev/hdb but your BIOS
will probably never look for the boot loader on hard drive B!" You are
probably booting the lilo on /dev/hda which now points to a kernel th
Please check out the league for programming freedom.
Every time I send mail, I supply the URL; it's in my signature.
Also, you should all join the EFF.
Unless we support the fight against software patents and the work of the
EFF, we may soon lose the legal right to even run the free software t
All,
Ok I've answered my own question. It seems to be a link problem in the
menu. If I go to Configure > Other > MenuEdit I get the menu editor. If
I go to Panel > Edit Menu It tells me that the menu editor isn't
installed. H guess I need to file a bug report. The Panel icon of
c
Vern,
As much as I like, and appreciate, this type of information, I think OT
would be a better subject as it does cost some of our list members for
every byte they download. Just a suggestion...
PJ
[EMAIL PROTECTED]
At 07:32 PM 6/16/00 -0700, you wrote:
>Be very afraid!
>Looky here!
> \
You will have to boot from your floppy. Then open your console and login as SU. From
there, just type "lilo" + enter and you're
done. It should reboot without the floppy. I get this once in awhile with my Lin/Win
boxes.
Seve
-Original Message-
From: LinuxMan <[EMAIL PROTECTED]>
To:
Hi,
I've been using Mandrake since version 6.0 or 6.1 I beleive. I really like
the distribution, especially the ease of installation. I had a few gripes and
problems with my most recent attempt.
1. First I tried to upgrade from 7.0->7.1. My distro of 7.0 was kept
up-to-date
with MandrakeUpdat
Tom,
I had a similar problem on my laptop. ( a Libretto running Mandrake
) with my 3com ethernet card. I tested the card on several other laptops
and found that it was the card not my setup. Every time I inserted it BANG
the system was totally locked up. No access at all. I would chec
All,
With 7.1 installed. and finally running I've been "tweeking" kde etc to
my liking and I've run into two problems. First the rpm install from
kdepackage of the secure kernel patch had some real trouble, It wouldn't
complete the install. I went into shell forced it to re-install ran l
Be very afraid!
Looky here!
\/
\/
\/
Gore Leads "Second American Revolution"
The "Father Of the Internet" Vice President Al Gore promised to lead a
"second American Revolution" by bringing the government to a totally
online status.
Complete story:
http://www.maximumpc.com
Okay Alan, thanks!
I learn more each day, I hope they will stand behind
these disks too. This is my first try with CheapBytes
I hope it's not "too good to be true".
Thanks again!
vern
Alan Shoemaker wrote:
>
> vernthe cheaper ones are mass produced, usually by an
> outside contractor and t
I'm running a Sony Z505S laptop with Mandrake 7.0. I've got a new
digital camera with a compact flash (CF) memory card (formatted as a DOS
fs), but am having trouble configuring the laptop to accept the card.
The symptom is a complete system lockup when the card is inserted into
the pcmcia slot;
Civileme, I'm just very thankful I didn't get caught
up in the i820 turmoil. My first "new" computer in
ten years! HP ain't what it used to be! :-)
vern
PS It sounds as though I need to steer clear of Xfree 4.0!!
Civileme wrote:
>
> vern wrote:
>
> > Same experience here with a HP 6540C, nomo
Do you mean even if and when we receive our "new" Mandrake 7.1
versions in the mail, we will have to upgrade the kernel???
vern
Denis HAVLIK wrote:
>
>
> :~>
> :~>Oh well... At least I've got a copy of mandrake 7.1 coming in the mail...
>
> Kind of nice, but you will still have to upgrade the
You can use esound, the Enlightenment Sound Daemon (Comes with Mandrake).
You'll have to do some RTFM, and problably use gnome, since kde does not
support it.
I've seen it work, it's fantastic, however I never tried it, so you're on
your own.
Jean-Michel Dault
[EMAIL PROTECTED]
On Fri, 16 Jun
TK Kim wrote:
>
> I tried to change the icon of the symlinks on my desktop, btw the icons are
> different from those of 'root' after installing Helix Gnome 1.2. I would go
> into property of a symlink and change the icons, but no effect. And, i
> checked the permission and it's alright.
> Anyon
What vga card are you using ?
>> Original Message <<
On 6/16/00, 11:23:46 PM, "M Thompson" <[EMAIL PROTECTED]> wrote
regarding Re: [expert] Promise ATA-66:
> I started installing MDK 7.1 last night and *YES* it does support the
PCI
> Promise Ultra66 PCI cont
On Fri, 16 Jun 2000, you wrote:
> tal amir wrote:
> >
> > Yes it is :-)
> >
> > >> Original Message <<
> >
> > On 6/15/00, 2:35:45 PM, "Cecil Watson" <[EMAIL PROTECTED]> wrote
> > regarding [expert] Promise ATA-66:
> >
> > > Is the Promise ATA-66 supported
Hi.
This really baffles me: since yesterday my system slows down to a crawl
every 30 secs to every 20 min, usually starting about 10 min after boot. And I
mean scrawl: I have to wait for typed characters to appear on the
screen. I think it gets worse with system uptime.
'top' shows no unusual ac
I am confused about supermount vs. automount/autofs.
They seem very similar by looking at the man pages,
but apparently they are different. Right? The install
of 7.1 has autofs as a possible service to start, and
I guess that I was confused about it vs. supermount so
left it checked to start. S
What rpms are you looking 4 ?
maybe we can help.
>> Original Message <<
On 6/16/00, 7:49:43 PM, Andre Steden <[EMAIL PROTECTED]> wrote regarding
[expert] Mdk7.1 - missing SRPMs:
> Hello,
> it seems that a lot or SRPMS are missing on the mirrors.
> Where
Heya all !
Can lilo boot from hdb ?
My primary disk is configurd as hdb cause i had
problems to config it as primary...
tried to tell lilo to boot from hdb and all i get is
li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04
I started installing MDK 7.1 last night and *YES* it does support the PCI
Promise Ultra66 PCI controller card!! In case you can't tell,
I'm very excited that I didn't have to feed the I/O numbers to the kernel in
order to make it see the Ultra66 card.
...After getting to 98% compl
Bonjour!
You're really making this more difficult than necessary. All you need
is the first box checked, didn't it say extra like on the paper envelope
that the disc was in? The second and third check boxes say
applications, you didn't want those did you?
-- Armand
"Joseph S. Gardner" wrote:
I was pleasantly surprised to see the banner on the
linux-mandrake home page regarding a petition for no
ePatents.
This makes me wonder, where is the American
equivalent? It is in fact the U. S. Patent and
Trademark Office that is one of the biggest
embarassments of the digital age. If you want
Hi!
i did not change any settings in my bios since i installed mandrake...
in fact , this happened from the first boot after installation... :(
when running lilo i get :
[root@webug /root]# lilo
Warning: /dev/hdb is not on the first disk
Added linux *
Added failsafe
Added floppy
[root@webug
Hi !
As i mentioned is one of the replys to this massage , i did not change
any defenitions in
my bios settings since system installation.
When booting with a floppy , everything is ok.
>> Original Message <<
On 6/16/00, 11:44:44 AM, Civileme <[EMAIL PROTECTED]
On Fri, Jun 16, 2000 at 07:29:00AM -0700, Eric Peters wrote:
> Also you might want to "su -"
> the "-" will allow the person to inherent root's environment this also goes
> for any user you want to su to example "su - eric". Please also note you
> have to be su'ed already.
>
> i.e. "Note the name
Hello
Which package(s) should I install if I want Java Servlets on my web server?
The server is now working just fine with PHP and now I want to try java
servlets. I prefer rpms insteed of compiling the program myself.
/ Martin
The "gateway" router will need a static route of 0.0.0.0 0.0.0.0 "isp
ip-address" or, if dhcp assigned, "eth0 - substitute actual interface name"
(all without quotes of course). The inside computers will need a static
route (or default gateway for MS Windows) of 0.0.0.0 0.0.0.0 "ip-address of
gate
On Thu, 15 Jun 2000, you wrote:
>
> BTW, why does IMWheel leave its root-only PID file in the /tmp
> directory after Root logs out? Real bitch to SU in a terminal just to
> let imwheel run normally as a user.
>
chmod a+x imwheel will fix that. Then, ANYONE will be able
to use imwheel.
Jo
G'day All,
I know a console consists of a display, keyboard, mouse combination
and these are also assigned to the $DISPLAY var during an X session.
Thing is, on my home net I have a server (with heaps of mem & hd space)
and an old Compaq Pressario (very limited resources) set up as a client.
I
On Thu, 15 Jun 2000, you wrote:
> I'm using Netscape Communicator 4.51. Whenever I go to a site that uses Java
> Netscape kills itself. Any idea on how to fix this or do I need to install
> a newer version of Netscape? Thanks.
>
Turn off Java. Trust me on this! :-)
John
Hello,
it seems that a lot or SRPMS are missing on the mirrors.
Where can i get the missing packages?
--
Andre Steden <[EMAIL PROTECTED]> - GPG ID: 332441FB
I'm trying to install a verisign certificate on apache 1.3.9, mod_ssl,
openssl, jserv
I have the certificate from verisign, but the only instructions on
installation given are for RedHat and it doesn't seem to be working.
I have the cert.cer and I need openssl to generate the pem file... help!
Eric Peters writes:
> Hey gang
>
> I'm sitting here installing 7.1 on my boss's laptop which is a dell inspiron
> 7000 with an ATI Mach64 w/ 4 megs of memory. but when I choose any lcd panel
> or monitor the test screen dose come up but the panel is acting like the
> refresh rate is way l
On Fri, Jun 16, 2000 at 07:46:40AM +, José Ignacio Alvear Zapata wrote:
>
>
>
> >Hello Ernie,
> >
> >i login as superuser! (root) on console 1 !!
> >
> >Then i want to switch to the user frank.
> >
> >su frank
> >
> >and i get the /dev/tty1 Permission denied.
> >
> >but the user id has chan
vernthe cheaper ones are mass produced, usually by an
outside contractor and the more expensive ones are burned
individually by a CD-R usually in-house. The pre-oder is
because of the lead time required by the outside contractor to
produce a significant order (don't know how many probably 100
> Hi,
>
> I'm using Mandrake 7.0 on a laptop. My laptop has a removable CD and a
> removable floppy. THe CD is in there most of the time but if I do a df,
the
> command hangs for a long time because it's trying to stat /mnt/floppy,
even
> though the drive isn't there. This also causes problems w
On Fri, 16 Jun 2000, you wrote:
> Tomif you mean things like Star Office, Worperfect,
> VMWare, Acrobat Reader, IglooFTP, IBM-Via Voice, MPEG-TV and
> all of the Loki demo's, then sure, nobody'll miss any of
> those. :-)
>
> Alan
point well taken ;)
>
>
> Tom Brinkman wrote:
> >
> >
(Smacking myself on the head)
This was a renewal certificate. I installed the origional last year and
this one was an update. So while I was running in circles attempting to
generate a new private key, it wanted the same private key we used last
year for this year's certificate.
Sig I've ins
Set your homepage to "about:" at
edit--->preferences>navigator
>> Original Message <<
On 6/16/00, 3:11:03 AM, Daryl Pawluk <[EMAIL PROTECTED]> wrote regarding
Re: [expert] Netscape problem:
> Daniel Hammer wrote:
> > BS''D
> >
> > > > -> > On 12 Jun, T
Grub is a boot loadermuch like lilo...
>> Original Message <<
On 6/16/00, 3:06:45 AM, Daryl Pawluk <[EMAIL PROTECTED]> wrote regarding
Re: [expert] Grub?:
> "Michael H. Collins" wrote:
> > Who or what is a grub? As I watch it being installed..
> >
If it is one of the older ISA modems that supports both the use of jumpers for
configuration and PnP you might try the following if you haven't already. Use the
jumpers to configure the modem for COM2 IRQ and disable your build in COM2 in your
CMOS setup. Although my modem isn't a USR is is the me
On Fri, Jun 16, 2000 at 07:46:40AM +, José Ignacio Alvear Zapata wrote:
->
->
->
-> >Hello Ernie,
-> >
-> >i login as superuser! (root) on console 1 !!
-> >
-> >Then i want to switch to the user frank.
-> >
-> >su frank
-> >
-> >and i get the /dev/tty1 Permission denied.
-> >
-> >but the us
On Fri, 16 (06/00) at 01:34 +, James Sparenberg <[EMAIL PROTECTED]> wrote:
> All,
>A question which may or may not be in the right place but here
> goes. How can I obtain a bare bones no and I mean no frills install with
> the new loader. No X No mp3 players nothing but base linux. It
"José Ignacio Alvear Zapata" <[EMAIL PROTECTED]> writes:
> >Hello Ernie,
> >
> >i login as superuser! (root) on console 1 !!
> >
> >Then i want to switch to the user frank.
> >
> >su frank
> >
> >and i get the /dev/tty1 Permission denied.
> >
> >but the user id has changed... Why i get this messa
Thanks!
>
> Yes, it is, BUT
>
"Joseph S. Gardner" wrote:
> Ray wrote:
>
> > I think it is a great feature that you can use the same install to install the
> > powerpack. They are not pushing anythng you can uncheck them real easy...
> > Added funtionality and people assume the worst. I would love to be able to pick
> > all of
John Aldrich wrote:
>
> On Tue, 13 Jun 2000, you wrote:
> > What does "(ext2) is designed properly, so there's no need" mean?
> >
> > No filesystem can be designed to eliminate fragmentation. If
> > you are constantly "churning" on your disk, especially if your
> > disk is > 80% full, it *will*
On Fri, Jun 16, 2000 at 11:47:05AM +0200, Joachim Holst (QCS) wrote:
> Hi !
>
> Just wonder if there isn't a tool (except /usr/local/bin/isdn) for configuring an
>internal
> ISDN card in Drake 7.1?
>
> Been using RedHat previously, and they have something called isdn-config to do the
>job..
>
Also you might want to "su -"
the "-" will allow the person to inherent root's environment this also goes
for any user you want to su to example "su - eric". Please also note you
have to be su'ed already.
i.e. "Note the names have been changed to protect the innocent."
login: eric
Password:***
Tomif you mean things like Star Office, Worperfect,
VMWare, Acrobat Reader, IglooFTP, IBM-Via Voice, MPEG-TV and
all of the Loki demo's, then sure, nobody'll miss any of
those. :-)
Alan
Tom Brinkman wrote:
>
> I think y'all are attributing some sinister motives here that
> prob'ly are
Hello
I am configuring a dual homed gateway as a router and
have some problems.
the configuration is that I have a subnet of three
computers with one having two nic's.
I want the other two computers one nic of the router
to be connected to the hub and the other nic to the
switch connceting to t
Well I just added a WD Ultra ATA-66 hard drive to my
setup. I have an Intel 810 chipset, am I in trouble??
Not knowing much about hardware timing and all!
vern
PS. It's on a ASUS mobo that HP hacked for the Pavilion
series of PC's, HP also hacked the BIOS so I can't turn
off the on board video! :
And they are the lucky ones in rural Kentucky
we have a blazing 24K wire (intermitant at that).
Lucky to have voice lines here! The all knowing
"data technician" from BellSouth told me so!!
May have to go to the big city and rent a motel
room and do an all night download fest!
Where are them damn
I think y'all are attributing some sinister motives here that
prob'ly aren't deserved. I installed 7.1 from lland.com 2 Cd's
just a few day's ago. When I was asked for a 3rd CD, I just lied
and clicked OK anyhow. Install said, 'can't find' the files and went
online to d/l 'em. When I saw i
I have a similar question on Cheapbytes one version is
called CDR and the other is just CD, so why the difference??
Also the one you have to preorder and wait for is about
half the price of the other. So having much more time than
money guess which I sent away for??
vern
Alan Shoemaker wrote:
>
Actually a 2 button with the wheel configured to be the third, but what I
was saying is there are some things like web pages that do the whole damn
thing in images. Graphics of text don't exaclty cut and paste into vi.
(Ever seen a 10,000 word essay as a giant gif, I have)
-David Talbot
At
Hi there,
I'm having a hard time installing Mandrake 7.1 on a Sony Vaio PCG-N505X
(that's one of these small subnotebooks).
To install, the kernel needs to know that the CD-ROM is on a tertiary
IDE-controller, i.e. you need a kernel parameter like ide2=0x180,0x386,15
With older versions of Ma
Ray wrote:
> I think it is a great feature that you can use the same install to install the
> powerpack. They are not pushing anythng you can uncheck them real easy...
> Added funtionality and people assume the worst. I would love to be able to pick
> all of my packages at one time to install
>
>
>Hello Ernie,
>
>i login as superuser! (root) on console 1 !!
>
>Then i want to switch to the user frank.
>
>su frank
>
>and i get the /dev/tty1 Permission denied.
>
>but the user id has changed... Why i get this message??
>(with Mdk 7.1).
>
>bye
>--
>Andre Steden <[EMAIL PROTECTED]> - GPG ID:
On Fri, Jun 16, 2000 at 01:34:40AM -0700, James Sparenberg wrote:
-> All,
->A question which may or may not be in the right place but here
-> goes. How can I obtain a bare bones no and I mean no frills install with
-> the new loader. No X No mp3 players nothing but base linux. It boots, I
I'm close but not quite there. I ran a small Java based news server under Windows
for a few small local news groups that I am trying to get working under LM 7.02. I
downloaded and installed the JRE1.2.2 and I can run the news server fine from the
command line when the system boots up and I have l
On Fri, Jun 16, 2000 at 12:12:17AM -0400, Brian T. Schellenberger wrote:
-> John Aldrich wrote:
-> >
-> > On Wed, 14 Jun 2000, you wrote:
-> > > As to the zie of file, I heard about this formula: 2**n, n is the
-> > > bits of your OS. SO in our case (32 bits), it's about 2.1GB. I used
-> > > IRI
Each and every time I install a release of Mandrake Linux I lose my internal
US Robotics 56K modems ability to be recognized. I takes me at least a day
to remember that last time I encountered this I had to rebuild the kernel
without the serial port driver that seems to usurp my serial ports befor
Greets all,
I purchased mandrake 7.1 disk 1 and 2 from www.lsl.com and installed
last night.
My question is, during the install (custom/workstation/install) I was
asked which of 3 additional disks did I have and none of the titles
given for the three matched that which was on either of my disks
We do have the web access. However, Netscape isn't always stable with it and
I lose some functionality. Thanks.
Jason
-Original Message-
From: Brian T. Schellenberger [mailto:[EMAIL PROTECTED]]
Sent: Friday, 16 Jun, 2000 01:53
To: [EMAIL PROTECTED]
Subject: Re: [expert] HP drivers/Outloo
At 02:35 + 2000/06/16, tal amir wrote:
>Hey you guy's ! :-)
>
>when booting lilo (mdk 7.1) i am getting :
>
>li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
>04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
>04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
>04 04 04 04 04 04 04 04 04 04 04 04
It's probably the port bind 8 uses for querying external name servers. You
can restrict this to a specific port using the "query-source address" option
in bind 8. See /etc/named.conf for details, the default MDK version contains
this option as a comment by default.
Regards,
Tony
> -Original
tal amir wrote:
>
> Yes it is :-)
>
> >> Original Message <<
>
> On 6/15/00, 2:35:45 PM, "Cecil Watson" <[EMAIL PROTECTED]> wrote
> regarding [expert] Promise ATA-66:
>
> > Is the Promise ATA-66 supported in 7.1? Thanks in advance,
>
> > Cecil
Yes, it i
Hi !
Just wonder if there isn't a tool (except /usr/local/bin/isdn) for configuring an
internal
ISDN card in Drake 7.1?
Been using RedHat previously, and they have something called isdn-config to do the
job..
/Jocke!
tal amir wrote:
>
> Hey you guy's ! :-)
>
> when booting lilo (mdk 7.1) i am getting :
>
> li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04
All,
A question which may or may not be in the right place but here
goes. How can I obtain a bare bones no and I mean no frills install with
the new loader. No X No mp3 players nothing but base linux. It boots, I
can get the net, telnet and ftp are available, a minimal install. From
the
On Thu, Jun 15, 2000 at 01:03:31PM -0400, Ernest N. Wilcox Jr. wrote:
> I just tried this with 7.0, and got the "permission denied" responce as well.
>
> Try becomming a superuser, then the other user and it will work - but you
> will still be logged onto your first user's home folder.
>
> So
Jason,
if you happen to come across 4050N driver during your serches, i will
be heppy to know about it.. :)
10x...
>> Original Message <<
On 6/16/00, 7:52:40 AM, "Brian T. Schellenberger" <[EMAIL PROTECTED]>
wrote regarding Re: [expert] HP drivers/Outlook:
Hi
under windowz , tracert to your isp and get the dns name and ip
number.
Update your dialer in Linux , and browse on !! :)
>> Original Message <<
On 6/15/00, 5:16:16 PM, "george r." <[EMAIL PROTECTED]> wrote regarding
[expert] ISP connect:
> How can I fin
I didnt to :)
>> Original Message <<
On 6/15/00, 6:44:47 PM, John Aldrich <[EMAIL PROTECTED]> wrote
regarding Re: [expert] parallel Port CD Burner:
> On Thu, 15 Jun 2000, you wrote:
> > I'm sure this has been beaten to dealt but is it possible to run a
Par
1) check ownership on the dir
2) is there a user "frank" ?
>> Original Message <<
On 6/15/00, 7:03:31 PM, "Ernest N. Wilcox Jr." <[EMAIL PROTECTED]> wrote
regarding Re: [expert] Mdk71 - su question !:
> On Wed, 14 Jun 2000 - Andre Steden, you wrote:
> | Hel
Yes it is :-)
>> Original Message <<
On 6/15/00, 2:35:45 PM, "Cecil Watson" <[EMAIL PROTECTED]> wrote
regarding [expert] Promise ATA-66:
> Is the Promise ATA-66 supported in 7.1? Thanks in advance,
> Cecil
Yeah...upgrade netscape...
it's getting old.
Get 4.73
>> Original Message <<
On 6/15/00, 8:04:47 PM, "Payne Stanifer" <[EMAIL PROTECTED]>
wrote regarding [expert] Old Netscape and Java:
> I'm using Netscape Communicator 4.51. Whenever I go to a site that
use
Hey you guy's ! :-)
when booting lilo (mdk 7.1) i am getting :
li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04
Type winipcfg in windows. This will show you all the necesary information.
On Thu, 15 Jun 2000, you wrote:
> How can I find the domain name and the DNS IP address of my ISP? I
> can't contact them (their website is unreacheable) to find out if something
> has changed. However, everything worked
Greetings, Linux-Mandrake users!
I'am using recent bind-8.2.2P5-6mdk on my masquarading linux-Mandrake v6.1
host .
I have probably paranoic question.
The command 'netstat -a | grep udp' issues among known hosts:ports following
result:
udp *:2826*:*(A
86 matches
Mail list logo