-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Sonntag, 16. Februar 2003 16:03 schrieb leo:
> Sometime ago i had setup a mdk8.2 machine with postfix and sasl which
> worked great. Now I've got another machine where i installed mdk 9.0 and
> did the same configuration but when I try to telnet int
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Donnerstag, 13. Februar 2003 10:21 schrieb Chuck Burns:
> On Friday 14 February 2003 3:16 pm, Dave Laird wrote:
> *snipped stuff about xnest gui*
>
> > In case your findings come to you off this list, could you please forward
> > any information you
Hello!
I have the little server on INTEL SHG2 Matherboard
with INTEL RAID Controller SRCMRU...
But can't installing Mandrake 8.0...
Where can I find the working driver for INTEL RAID
Controller SRCMRU ?
All _ best _ to _ you
!!!_654086,RUSSIA,NOVOKUZNETSKOAO ZO
For a true SCSI tape drive (not an IDE tape drive that is accessed as a SCSI
tape drive using the ide-scsi module), you do not need to run makedev nor
re-install -> just load the scsi tape module (note the SCSI controller module
has to be loaded first). I think that even the module will be auto
On Sun, 2003-02-16 at 17:14, Greg Meyer wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> I have always wondered this, so I'll throw it out and hopefully someone can
> shed some light for me.
>
> Many times after a new version of Mandrake comes out, I like to rebuild some
> of the ke
On Sat, 2003-02-15 at 17:32, g wrote:
> i tried it, but found that makedev was not installed. could also be why when i
> tried 'man makedev', i got a 'not found'. so i did not go any further with it.
>
Just to let you know makedev is MAKEDEV.
Mike
--
Michael Noble
mailto: [EMAIL PROTECTED]
On Sunday 16 February 2003 01:00 pm, Wolf N. Paul wrote:
> I am having trouble getting a 120G Maxtor 4G120J8 disk
> working on my Mdk 9.0 system.
>
> When I attach the drive and reboot, the boot hangs
> indefinitely at the partition check, both when the disk
> was virginal from the store, and now t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have always wondered this, so I'll throw it out and hopefully someone can
shed some light for me.
Many times after a new version of Mandrake comes out, I like to rebuild some
of the key packages, like glibc, XFree and KDE with GCC optimizations fo
Since you have Windows, the first thing I would do is d/l the diagnostic
utility (PowerMax) from the Maxtor web site and run that. (Actually, you run
the downloaded program that then creates a boot disk...)
It may be co-incidence, but I just got the same drive for my father (at least
it was a
If there is a jumper on the disk to reduce the size, try that (for
testing), this might eliminate the possiblity that the drive is faulty.
Although it works in win2k, have you done a surface scan there?
It really does sound like its the kernel thats the problem though, you
could search google
Michael Noble wrote:
On another system that I had, I did try and use makedev, but it did
not work. It made the devices, but links were not made to correct
locations
I ended up rebuilding the system with the drive in and all went well.
The system now sees the tape drive, there really ought t
On Sunday 16 Feb 2003 8:46 pm, James Sparenberg wrote:
> On Sun, 2003-02-16 at 10:48, Anne Wilson wrote:
> > On Saturday 15 Feb 2003 12:18 am, Chuck Burns wrote:
> > > On Sunday 16 February 2003 5:14 am, john wrote:
> > > *snip*
> > >
> > > > Anne,
> > > >
> > > > I think this is what you need,
> >
I am having trouble getting a 120G Maxtor 4G120J8 disk
working on my Mdk 9.0 system.
When I attach the drive and reboot, the boot hangs
indefinitely at the partition check, both when the disk
was virginal from the store, and now that I have created
a single large primary partition on it with Win2K
Guy Zelck <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Simon Ree wrote:
>
> >Guy Zelck <[EMAIL PROTECTED]> wrote:
> >
> >
> >>Hello all,
> >>
> >>Will there ever be a KDE3.1 version released for 8.x?
> >>
> >>I only now can say that I've got my 8.1 system like I want it to be. In
> >>the mean time Mandr
on the server, do a openssl -verify [certificate] to make sure that
everything is set up properly. It's very finicky IME
On Sun, 2003-02-16 at 07:03, leo wrote:
> Sometime ago i had setup a mdk8.2 machine with postfix and sasl which
> worked great. Now I've got another machine where i installed md
Ken Thompson wrote:
On Thursday 13 February 2003 12:33 pm, Mark Weaver wrote:
JOHAM,DAVID (HP-Boise,ex1) wrote:
Ken,
I notice you have cableone which I assume that means you have a
cablemodem? I live in Boise and have the same service
The reason I bring that up is that I'm curious if you
On Sun, 2003-02-16 at 06:29, Simon Ree wrote:
> Guy Zelck <[EMAIL PROTECTED]> wrote:
> > Hello all,
> >
> > Will there ever be a KDE3.1 version released for 8.x?
> >
> > I only now can say that I've got my 8.1 system like I want it to be. In
> > the mean time Mandrake raced versions, which in my
Thank you very much for the advise. I'll print this out and see if I can't
come up with a solution that will work. I don't recall this being a problem
in earlier releases. Maybe I'm just forgetting.
On Saturday 15 February 2003 07:05 am, Guy Van Sanden wrote:
> The difference betweek kmail and m
On Sun, 2003-02-16 at 10:48, Anne Wilson wrote:
> On Saturday 15 Feb 2003 12:18 am, Chuck Burns wrote:
> > On Sunday 16 February 2003 5:14 am, john wrote:
> > *snip*
> >
> > > Anne,
> > >
> > > I think this is what you need,
> > > Control Center > LookNFeel > Taskbar
> > > Uncheck the "Group simila
On Sun, 2003-02-16 at 08:41, Karsten Bräckelmann wrote:
> cheers();
>
> > > > Ok I'm hitting a wall here with close to 200,000 e-mails in evolution
> > > > I'm at a point where I really need to be able to archive a ton of this
> > > > off. BUT I also need access to these without jumping through
On Friday 14 February 2003 10:03 pm, James Sparenberg wrote:
> On Fri, 2003-02-14 at 08:31, Lorne wrote:
> > On Thursday 13 February 2003 10:25 pm, James Sparenberg wrote:
> > > Don't really know what my level is... I just send em some every month.
> > > (silver standard something like that.) Any
>> Well that depends on the time but i have tried on a
>> single clients connection also .. on which i get 1.5
>> mbps max
What you checked the duplex mode the client(s) and server is(are) at?
In windows i have seen it make a huge difference.
Rob
Want to buy your Pack or Services from Mandrake
--- Robert Wideman <[EMAIL PROTECTED]> wrote:
> >> i have a 100mbps network
> >> utp cable 10/100 mbps switch hub
>
> switch or hub? shouldnt matter but still.
SOHO 3com Switch
>
> >> 60 clients consisting of Linux , Windows &
> solaris O/S
> >> Dns is used for name resolution
> >> there is a
On Sun, Feb 16, 2003 at 02:36:36PM -0500, Praedor Atrebates wrote:
> How do I end run this mdkcustom nonsense and get a properly named kernel
> header (2.4.19-16mdk instead of 2.4.19-16mdkcustom)?
>
Go to the Makefile in the src directory /usr/src/2.4.19-16mdk/Makefile
and remove the custom fro
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
One of the many problems I am having getting wireless device drivers to build
is because of the Mandrake/Redhat business recently of FORCING any new kernel
build to be appended with mdkcustom. Big problem. I do NOT want to rebuild
my kernel at thi
>> i have a 100mbps network
>> utp cable 10/100 mbps switch hub
switch or hub? shouldnt matter but still.
>> 60 clients consisting of Linux , Windows & solaris O/S
>> Dns is used for name resolution
>> there is a local webserver "Apache" running on my
>> network which provides large media files
Praedor Atrebates wrote:
I finally went ahead and upgraded from MDK 8.2 to MDK 9.0 on my laptop (IBM
Stinkpad 1412, Celeron). It installed just fine and everything is working OK
except for wireless.
I have 2 devices to play with: an Orinoco Gold and a Zoomair. Under 8.2 I had
the Zoomair (
On another system that I had, I did try and use makedev, but it did
not work. It made the devices, but links were not made to correct
locations
I ended up rebuilding the system with the drive in and all went well.
The system now sees the tape drive, there really ought to be a better
way to
Well sorry for this Ot Question
i have a 100mbps network
utp cable 10/100 mbps switch hub
60 clients consisting of Linux , Windows & solaris O/S
Dns is used for name resolution
there is a local webserver "Apache" running on my
network which provides large media files to clients as
downloads...
th
Have you tried installing the wireless extensions rpm?
Other than that i have no clue, havent played with wifi on linux.
Rob
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]On Behalf Of Praedor Atrebates
>> Sent: Sunday, February 16, 2003 12:53 PM
>> To: Mandr
I finally went ahead and upgraded from MDK 8.2 to MDK 9.0 on my laptop (IBM
Stinkpad 1412, Celeron). It installed just fine and everything is working OK
except for wireless.
I have 2 devices to play with: an Orinoco Gold and a Zoomair. Under 8.2 I had
the Zoomair (prism2) working just fine.
On Saturday 15 Feb 2003 12:18 am, Chuck Burns wrote:
> On Sunday 16 February 2003 5:14 am, john wrote:
> *snip*
>
> > Anne,
> >
> > I think this is what you need,
> > Control Center > LookNFeel > Taskbar
> > Uncheck the "Group similar tasks" box
> > Now every instance of every kde app will appear a
On Saturday 15 February 2003 05:45 pm, gikoreno wrote:
> Hey everyone:
>
>
>
> I would like to know if DiskDrake supports RAID0+1 or RAID1+0, and how I
> can achieve these configurations using DiskDrake.
>
>
>
> If that can't be done, what's the easiest way I can implement these, since
> I know the
On Sunday 16 February 2003 10:44 am, Guy Zelck wrote:
> Hi,
>
> Simon Ree wrote:
> >Guy Zelck <[EMAIL PROTECTED]> wrote:
> >>Hello all,
> >>
> >>Will there ever be a KDE3.1 version released for 8.x?
> >>
> >>I only now can say that I've got my 8.1 system like I want it to be. In
> >>the mean time M
cheers();
> > > Ok I'm hitting a wall here with close to 200,000 e-mails in evolution
> > > I'm at a point where I really need to be able to archive a ton of this
> > > off. BUT I also need access to these without jumping through hoops.
> > > Any suggestions on how to do this? To say the leas
Hi,
Charles A Edwards wrote:
On Sun, 16 Feb 2003 09:29:37 -0500
Simon Ree <[EMAIL PROTECTED]> wrote:
Maybe you could build it?
Though it requires some time and effort kde-3.1 will build on 9.0, since
9.0 uses qt3
8.2 uses qt2, so unless you are a programmer and can re-write some
of t
Hi,
Simon Ree wrote:
Guy Zelck <[EMAIL PROTECTED]> wrote:
Hello all,
Will there ever be a KDE3.1 version released for 8.x?
I only now can say that I've got my 8.1 system like I want it to be. In
the mean time Mandrake raced versions, which in my view is crazy .
It's becoming more and more d
Sometime ago i had setup a mdk8.2 machine with postfix and sasl which
worked great. Now I've got another machine where i installed mdk 9.0
and did the same configuration but when I try to telnet into the postfix
server i get "535 Error: authentication failed":
220 server.home ESMTP Postfi
On Sun, 16 Feb 2003 09:29:37 -0500
Simon Ree <[EMAIL PROTECTED]> wrote:
> Maybe you could build it?
Though it requires some time and effort kde-3.1 will build on 9.0, since
9.0 uses qt3
8.2 uses qt2, so unless you are a programmer and can re-write some
of the code kde-3.1 can not be built nor w
Guy Zelck <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> Will there ever be a KDE3.1 version released for 8.x?
>
> I only now can say that I've got my 8.1 system like I want it to be. In
> the mean time Mandrake raced versions, which in my view is crazy .
> It's becoming more and more difficult to h
On Sunday 16 February 2003 5:14 am, john wrote:
*snip*
> Anne,
>
> I think this is what you need,
> Control Center > LookNFeel > Taskbar
> Uncheck the "Group similar tasks" box
> Now every instance of every kde app will appear as a seperate icon
I'm sure you missed the point of her post. The way
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 February 2003 07:00 am, Guy Zelck wrote:
> Hello all,
>
> Will there ever be a KDE3.1 version released for 8.x?
>
You are using an operating sytem that will become unsupported on March31,
2003. About 45 days from now. I don't think you
Hello all,
Will there ever be a KDE3.1 version released for 8.x?
I only now can say that I've got my 8.1 system like I want it to be. In
the mean time Mandrake raced versions, which in my view is crazy .
It's becoming more and more difficult to have recent versions of
programs. I find myself more
On Sunday 16 Feb 2003 11:14 am, john wrote:
> On Saturday 15 Feb 2003 H:49 pm, Anne Wilson wrote:
> > One thing that winds me up is that I can open Konq as a user, then open a
> > super-user window, and they stack up under one icon on the task bar. I
> > can see no indication that they are any dif
On Saturday 15 Feb 2003 H:49 pm, Anne Wilson wrote:
> One thing that winds me up is that I can open Konq as a user, then open a
> super-user window, and they stack up under one icon on the task bar. I can
> see no indication that they are any different, which means that If I don't
> close the su o
Yeah, I noticed that, as I mentioned in my original mail, but that
didn't work well...
In the end, I managed to do it with mpage:
mpage -a -o -R -m50 tools1.ps > fix.ps
Cheers,
Hans
On Sun, 2003-02-16 at 11:28, Guy Van Sanden wrote:
> Easy, just open the pdf with kprinter, and select the opti
Hello
I run KDE 3.0.5 with Liquid style as my main Desktop Environment.
I have AquaGraphite style set for my GTK1 applications (Like evolution)
to make my desktop look consistent.
But I seem to have problems doing something similar for GTK2 apps (which
the next version of Evolution will be BTW..
Easy, just open the pdf with kprinter, and select the option...
works right away on PDF files.
On Sat, 2003-02-15 at 23:53, Erik Laxdal wrote:
> On Saturday 15 February 2003 12:49 pm, SainTiss wrote:
> > Hi,
> >
> > I'm looking for an application which can handle "resizing" pages of a
> > pdf docu
all,
Sorry about the triple send I'm running cooker here and evo is having
trouble with screen paints I click it does and I get no feedback
what so ever.. again sorry.
On Sun, 2003-02-16 at 02:02, James Sparenberg wrote:
> On Sat, 2003-02-15 at 07:20, Jack Coates wrote:
> > On Fri, 2003-02-
On Sat, 2003-02-15 at 06:20, Karsten Bräckelmann wrote:
> cheers();
>
> > Ok I'm hitting a wall here with close to 200,000 e-mails in evolution
> > I'm at a point where I really need to be able to archive a ton of this
> > off. BUT I also need access to these without jumping through hoops.
> >
On Sat, 2003-02-15 at 07:20, Jack Coates wrote:
> On Fri, 2003-02-14 at 23:18, James Sparenberg wrote:
> > On Fri, 2003-02-14 at 21:16, Jack Coates wrote:
> > > On Fri, 2003-02-14 at 20:43, James Sparenberg wrote:
> > > ...
> > > > I do this with VNC all the time. My desktop runs tight vnc but o
On Sat, 2003-02-15 at 07:20, Jack Coates wrote:
> On Fri, 2003-02-14 at 23:18, James Sparenberg wrote:
> > On Fri, 2003-02-14 at 21:16, Jack Coates wrote:
> > > On Fri, 2003-02-14 at 20:43, James Sparenberg wrote:
> > > ...
> > > > I do this with VNC all the time. My desktop runs tight vnc but o
On Sat, 2003-02-15 at 07:20, Jack Coates wrote:
> On Fri, 2003-02-14 at 23:18, James Sparenberg wrote:
> > On Fri, 2003-02-14 at 21:16, Jack Coates wrote:
> > > On Fri, 2003-02-14 at 20:43, James Sparenberg wrote:
> > > ...
> > > > I do this with VNC all the time. My desktop runs tight vnc but o
53 matches
Mail list logo
