For sale:
I want to sell my very clean flex5000 (vu5k) s/n 3510-2932. It is fully loaded
with second rx, atu, and 2m/70cm vu transverter. It just came back from a
grease job and oil change at flexradio in Austin and has all of the cables and
manuals. I'm
asking $3300 shipped.
73,
Richard
After destroying several other brands during the heat of a contest, I got
several of the linemaster switches and I've not yet needed the spare after
several 1000 Q contests.
Richard W5SXD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Did anyone make any long tuneable recordings of the six meter activity
during the June VHF contest?
Richard W5SXD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
I use a coaxial relay with the de-energized side going to a dummy load and the
other to multiband hf antenna. The relay is powered by a wall wart that is
plugged into one of the sockets on my Ethernet power controller.
I live near Houston and my remote station is 50 miles west of Fort Worth. I
Gerald,
I give up. What is a cement mixer overpass?
5000 is rxing 435 MHz great on satellites! I wish the sats were as well
stabilised and accurate as the 5000.
Regards,
Richard W5SXD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Russel KF1K,
I could not find your e-mail address; hope you see this.
As soon as Flex (wisely) stopped providing SVN access I requested and
received the complete source for 2.0.6 and successfuly built it.
There were a few minor problems but it came up after they were fixed.
All I wanted to
Jeff,
As you suspected, the cyan numbers on the right represent the delta freq, the
amplitude of the largest signal, and the frequency of the largest signal. They
represent the entire window width, not just the selected bandwidth.
There is also another set that appears on the left side when
The windowing functions only change the shape of the signals in the display.
You will not hear any difference between them since they are only applied to
the display. It can only be seen. They really have nothing to do
with noise reduction.
See p 102 in the current manual.
If you tune to a
I am trying to remove vcom. According to portmon and other resources, com10
thru com23 are assigned as VCom10 thru VCom23. Can anyone tell me how to get
rid of these assignments?
In addition, com8 was, at one time linked to com9 thru vcom. I don't see this
in the vcom configurator but
windoze xp sp3, vcom from several years ago (v226a I think)
Richard
Tim Ellison telli...@itsco.com wrote:
(02/16/2009 11:54)
What operating system are you using?
-Tim
Sent from my iPhone
On Feb 16, 2009, at 12:50 PM, richard allen r...@rcallen.com wrote:
I am trying to remove vcom
-radio.biz
[mailto:flexradio-boun...@flex-radio..biz] On Behalf Of richard allen
Sent: Sunday, January 04, 2009 11:12 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] vac glitches?
I am running the vac at MME 512 buffer and 8000 Hz sample rate on PowerSDR
(several versions including the latest
I am running the vac at MME 512 buffer and 8000 Hz sample rate on PowerSDR
(several versions including the latest) and an sdr1000. I am receiving the
output in a spectrum analyser from virtual cable 1 running at 8000 Hz sample
rate and doing 4096
point ffts. ABout every five seconds I get a
; [EMAIL PROTECTED]; richard
allen
Subject: Re: [Flexradio] old stuff!
Check out 1961... lot's of good ham gear in there...
http://www.radioshackcatalogs.com/catalogs/1961/
--
Phil Covington
Software Radio Laboratory LLC
Columbus, Ohio
http://www.srl-llc.com
from back when radio shack sold ham gear:
http://www.radioshackcatalogs.com/catalogs/1939
Richard W5SXD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Notes on using Faros 1.2 with sdr-1000 and fa-66 audio.
You can use Faros 1.2 with your sdr-1000 if you are using the Edirol fa-66
sound device.
First set the fa-66 and sdr-1000 up for 96000 Hz sample rate. Go to 14.100 CWU
with CW Pitch set to 600 Hz. Turn off SR (Spur Reduction). Also make
Is anyone using Faros with VAC and an sdr1000 and getting
proper delay timing? I seem to have a timing drift problem.
see Faros at http://www.dxatlas.com/faros/
Thanks,
Richard W5SXD
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
Thanks to Bob, N4HY, for squashing all my concerns
about the bottom end of six meters on the flex5000.
See the fine power spectrum at: http://rcallen.com/6meter.png
Nice job guys!
Enjoy,
Richard W5SXD
___
FlexRadio mailing list
Tim,
Your updates to the FLEX-5000 FAQ have been great. Is there some way to
tell what things have been changed from one version to the next? The time
on the FAQ is two hours after the time of your announcement and I don't want
to miss any little detail changes.
Regards,
Richard W5SXD
Eric,
The new wide waterfall is very nice! Shortly I'll be able to throw
away my SDR14!
Regards,
Richard W5SXD
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
Eric,
Is there still a timeout in the transmitter/ I am having a problem with
my remote operation. When I run on 80 meters where my swr is a bit high
and sometimes the rf gets into my cable modem and shuts down my remote
control. This has happened several time when I had my key down and I
lost
Dale (or anyone else),
It appears that the new version of tortoise is nowwhere near as easy
to start as the older one. I had no problems setting up the sdr-1000
stuff on two other computers but now it is eluding me. Can you point
me to the quick start document that you provided earlier in
- center of positive freqs
You want IF (11025) rather than baseband because soundcards roll off
towards 0Hz.
That jog it?
73
Frank
AB2KT
richard allen wrote:
Would someone please refresh my memory as to the derivation of the 11.
025 kHz value?
Richard, W5SXD
Would someone please refresh my memory as to the derivation of the 11.
025 kHz value?
Richard, W5SXD
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
Does anyone know of a program that will eat the daily FlexRadio
Digest file and allow you to browse it and reply painlessly to
messages within?
Richard W5SXD
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
What several folks seem to not know is that C# is not the same as C.
In fact, the difference between C# and C++ is almost as great as the
difference back to Visual BASIC 6. The IDE from Microsoft is what
really brought PowerSDR over so quickly from Visual BASIC. The C++
IDE is no where near
The version number is also now shown in the release notes on their
website.
Richard W5SXD
Jim Lux [EMAIL PROTECTED] wrote:
(03/17/2006 19:28)
At 03:19 PM 3/17/2006, Eric Wachsmann - FlexRadio wrote:
Several things need to be said about this release.
How do we relate a particular Preview
Lyle,
Did you find a PCMCIA or Cardbus parallel port card that worked with
the sdr1k?
I've had too much trouble keeping rf out of the FlexRadio USB adaptor.
Regards,
Richard W5SXD
Lyle Johnson [EMAIL PROTECTED] wrote:
(03/03/2006 00:27)
Is anyone using a laptop with Flex-Radio?
Beware
It would be really nice if
1: actual frequencies could be shown across the top of the pan
display
instead of relative ones. Like I2PHD's beautiful sdr display.
2. the band edges could be shown with a simple tick mark.
Richard W5SXD
Cecil,
Changing development software in the middle of a large project is a
pretty dangerous thing to do. The main problem is that while some
piece of code may compile correctly it may not work exactly the same
way as with the old development environment. Because, in a project
like this,
For some future release, a simple locut filter on the scope display
would make it easier to use at times.
Richard W5SXD
Ken,
My HP mobo RealTek sound went away on several systems as soon as I
installed the delta44. Simply going into the bios and reenabling it
worked each time for me.
As far as multi-applications using the vac, I am running MixW and
PSK31 Deluxe and my own spectrum analysis program all at
Tim,
I agree completeky but I don't think you went far enough. The
selection should probably be keyed on the object external application
and not the mode of the radio. I find my self with two or three sstv
programs, two or three rtty, and several cw decoders. It would be
nice to be able to
Very nice, Bob, at 96000 at least. No difference I can see with the
delta44 except twice the panadaptor width and half the width on the
signals. Great to see +- 20 kHz.
Now I need a sound card that will do the 192000. Is that gonna be
the firebox talked about here?
Richard, W5SXD
Robert
Bill,
You can probably get a good mathematical explanation from Bob or Frank.
I like to think that the window smooths out the edges of a set of
data to eliminate high frequency false info caused by the sharp
transitions.
Practically, some of the window functions provide nice narrow spikes
at the bottom and I wasn't
finished yet.
I like the CWX window Richard.
Mike - AA8K
richard allen wrote:
Mike,
Thanks for the report. Tab does indeed not work as a delimiter for any
of the up down controls in CWX. Enter works and bumping the values up
and down with the buttons works
Dale (and Tim)
I would suggest not trying to import your old database. In adding
the CWX form we had it cross-wired with the old CW form for some time.
The only way that I know is to start from scratch. Sorry about that.
And Tim, I agree that some form of modular or selective import would
Art,
Thanks for the report.
I think I have the missing first character problem fixed I needed to
have more delay between PTT and the start of the first keydown.
There should be a new release soon.
Regards,
Richard W5SXD
[EMAIL PROTECTED] wrote:
(02/13/2006 14:29)
When keying the SDR1K
Bob,
Do you know if this tool will run on intel processors also? The
website seems to say that it is for amd devices only. Is it also
able to be used with visual studio 2003 or just with 2005?
Richard W5SXD
[EMAIL PROTECTED] wrote:
(02/13/2006 05:57)
Carl, WN3DUG said: I noticed that a
Robert,
If you are using the delta44 audio card and perhaps others, set the
Setup-Audio-BufferSize to 256 and make sure you are running asio.
You can also try and set Setup-DSP-Keyer-HighRes although with my 3
GHz Pentium 4 I don't see much difference there. The audio buffer
size is the
In addition, Robert, you can get a copy of the new cwx section of the
manul at:
http://rcallen.com/cwx0.pdf
Richard W5SXD
José_Dumoulin [EMAIL PROTECTED] wrote:
(02/12/2006 16:36)
Robert
I don't know for 1.5.15, but I downloaded 1.5.12 from here
You are correct, Jim. The thing we are trying to determine, however,
is why the cpu loading increased from preview 13 to 14 and only on
certain folks systems. The behaviour relative to covering the window
has been present in earlier versions.
Richard W5SXD
Jim Lux [EMAIL PROTECTED] wrote:
PowerSDR 1.4.5 preview 14 has a new replacement for the old CW button
and its functionality.
To use this new version, and please do, leave the Setup-DSP-Keyer-
NewKeyer check box checked and then use the new CWX button on the
main menu to start up the new CWX functions. They are a part of
Thanks, Willi. We try to please.
Richard, W5SXD
Willi Reppel [EMAIL PROTECTED] wrote:
(02/10/2006 03:59)
bjr José,
Amazing to see that SDR1000 support is a 24 hour activity and Bruce gets the
answers served for break-fast in distant Alaska.
73, Willi
- Original Message -
From: José
That message is just information, not an error. If the program is
run for the first time, it needs to build the file containing the
editable Morse definitions. I have removed the message in the
current code.
Thanks,
Richard W5SXD
Joe - AB1DO [EMAIL PROTECTED] wrote:
(02/10/2006 11:03)
Hi,
A preliminary copy of the new CWX section of the sdr1000 manual may be
found at
http://rcallen.com/cwx0.pdf
Regards,
Richard W5SXD
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, February 10, 2006 11:48 AM
To:
73
Dale AA5XE
richard allen wrote:
A preliminary copy of the new CWX section of the sdr1000 manual may be
found at
http://rcallen.com/cwx0.pdf
Regards,
Richard W5SXD
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, February
I see you under amsat eng group.
Richard
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert McGwier
Sent: Friday, February 10, 2006 8:52 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] TeamSpeak
Has the TeamSpeak server gone down or do I have a
Lee,
Nice and simple. In fact, there is really no reason for an OFF state.
I find turning on the crosshair just one more thing to do when
powering up the radio.
Richard W5SXD
Lee A Crocker [EMAIL PROTECTED] wrote:
(02/09/2006 07:27)
The simplest would be to make the right click a 3 way
Tim and Norman,
I've tested previews 7, 9, 11, 12, and 14 on 40 m cw using a 3 GHz
Pentium, delta44 audio, 256 sample audio buffer and 1024 sample dsp
buffers. My cpu utilisation on versions after 7 is running between 4.
7 and 10.9 %. Version 7 is a bit higher at 7-12%. I see no increase
I agree with Eric also. Do not split this resource up. I also do
not read some topics but certainly want to be aware of the
discussions happening. Some of us caught some flak a few weeks ago
discussing a 'mystery signal' in the middle of one of our ham bands.
There may have been a dozen
My sympathies!
What antivirus service was it?
Richard W5SXD
Robert McGwier [EMAIL PROTECTED] wrote:
(02/01/2006 19:10)
Well I have returned home to a couple of disasters.I downloaded
email, etc. on Monday morning at 1:30 AM when I returned home.My
antivirus service updated the
, and let
me know if it worked.
Thanks!
73, Dale
richard allen wrote:
Dale,
I am trying to upload a 37,763 KB zip file containing a 66 MB .wav.
It eats the file and then
displays the unknown page message below. File is named 2006-01-26
11 24 00 PM.zip.
http://www.hamsdr.com
Much wider than psk31 and a lot narrower than drm but it is very
interesting with its mesa shape. It's been there for at least the
last six months. It's 20 dB out of my noise in el29 at 1100Z this
morning.
Richard W5SXD
Fred Brandeberry [EMAIL PROTECTED] wrote:
(01/26/2006 01:01)
Hi
I'll be glad to. How do I do that?
Richard W5SXD
Dan Babcock [EMAIL PROTECTED] wrote:
(01/26/2006 15:45)
Fred,
Would you or Richard be able to upload a short (two or
three minute) wave file of the signal to WA8SRA's
www.hamsdr.com website?
BTW, this website is becoming an outstanding source
.
73 Dan N4XWE
--- richard allen [EMAIL PROTECTED] wrote:
I'll be glad to. How do I do that?
Richard W5SXD
Dan Babcock [EMAIL PROTECTED] wrote:
(01/26/2006 15:45)
Fred,
Would you or Richard be able to upload a short (two
or
three minute) wave file of the signal to WA8SRA's
Account = Upload Files. On the next page select
Public Directory and click the Upload a file button.
Then follow the directions.
The .wav files can become fairly large very quickly so
2 to 3 minutes is probably the optimum length for
recording.
73 Dan N4XWE
--- richard allen [EMAIL PROTECTED
Read n4hy tutorial on the flex-radio website. It worked for me.
Richard W5SXD
Mont O'Leary [EMAIL PROTECTED] wrote:
(01/22/2006 14:32)
I am hoping to use VAC to make the connections required to run the various
digital modes as the last step in freeing myself from my Pro-II rice box.
I say hope
Bill,
If there is a database in the directory that you run from, it will
use it else create a new one. If you run from the ide, that will be
either ..\bin\debug or ..\bin\release depending on what you told it
to do. If I have a bunch of stuff in a database that I want to keep
safe, I'll
Mike,
I agree with Eric mostly. The only problem I have had under Windows XP
is trying to install mutiple cards of the exact same type/manufacturer.
That was several years ago and they might have cleaned that up by now.
One of my machines runs with delta 44, turtle beach, creative mp3+, and
the
Gentlemen,
The DDS does Direct Digital Synthesis hence the name. It does not
divide
back to anything but runs an phase accumulation engine at 200 MHz (or
whatever
the clock rate) that produces output values to the dac at that rate.
No division is performed.
Richard W5SXD
John Ackermann
Several folks have asked me about remote operations for an sdr1000.
http://flex-radio.com/download_files/PowerSDR/Docs/SDR_Remote.pdf
outlines some basics.
My system has just started operation this week and is described here.
I have a 100 w sdr1000 operating in remote service. I use Skype for
and give it a try.
Richard W5SXD
Jiri Sanda [EMAIL PROTECTED] wrote:
(12/24/2005 04:48)
Hi Richard,
how much bandwith you need for all that stuff ?
73 !
Jiri
OK1RI
On Sat, 24 Dec 2005, richard allen wrote:
Several folks have asked me about remote operations for an sdr1000.
http://flex-radio.com
, you might want to look
at tightVNC. It has some extra .jpg compression features
that could increase your panadapter response:
http://www.tightvnc.com/
de Ken N9VV
richard allen wrote:
The Skype voip stuff for the audio is pretty low bandwidth
Martin,
If you can connect to the CAT inout of the sdr-1000 you can send the
radio a power on command from there.
Richard W5SXD
Martin Hirsch [EMAIL PROTECTED] wrote:
(12/22/2005 21:32)
Thanks Eric for your reply. Would be very nice to control the SDR1k via
touchscreen so I'll wait and for
It was really a combination of the echo and recognising your call from
this venue.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ab7r
Sent: Sunday, December 11, 2005 2:55 PM
To: Flexradio@flex-radio.biz
Subject: [Flexradio] SSB audio question
Not sure
Eric,
The desired mute needs to be more than just the audio since the agc
will get twanged badly. The objective, in addition to muting the
audio is to have the RX up and running immediately upon release of
the mute. It should, in addition to being a single hardware closure,
work thru the
Eric,
Make sure to allow the user to select if the input is a mute or an
unmute by having a check box for the sex of the input.
Richard W5SXD
Eric Wachsmann - FlexRadio [EMAIL PROTECTED] wrote:
(12/14/2005 17:28)
The solution Larry and I discussed was an audio only fix that does not
handle
, December 14, 2005 5:49 PM
To: 'richard allen'
Cc: [EMAIL PROTECTED]; 'Larry W8ER'; 'Flex Reflector'; 'Jim Lux'
Subject: RE: [Flexradio] Mute for SDR Receiver
Meaning the polarity of the switch? I didn't implement that in my first
pass, but that's a simple thing to add if necessary.
Eric Wachsmann
Would someone please send me a link to a technical reference for the
xylo board?
Thanks,
Richard W5SXD
Philip Covington [EMAIL PROTECTED] wrote:
(12/01/2005 20:38)
Hi Phil,
Good deal, sounds great! I am curious what sampling rate you were
running the Wolfson chip at and whether your were
Phil,
Are you saying that you will modify any zero sample by one count to
guarantee uniqueness of the sync? Also, it would seem that you would
not want to reduce bandwidth by 1/3 to sync every stereo sample. I
sync only once every 500 channels in a larger system in the same
manner with no
Mike,
I run one of my sdr1000s on an old 1000 MHz Toshiba running XP Pro
with 256 M of ram and MP3+ sound interface. I would consider that to
be the absolute minimum but it does run. I back the scope refresh
rate back to 5 Hz also. I can even run the development environment
assuming have
Thanks, Mitch. What computer are you running?
Mitch Easton [EMAIL PROTECTED] wrote:
(11/27/2005 06:58)
Rich,
I am using the SDR-1K via the parallel port, and an HP 2420D laserjet via
USB. Running Win XP Pro (SP2). No problems, or unwanted interactions noted
here.
Mitch - W2MDE
To: 'richard allen'
Cc: FlexRadio@flex-radio.biz
Subject: [Flexradio] hp usb printer
Rich,
I'm running a homebrew puter: Asus P4C800E mobo, P4 @ 3.2GHz, and 2GB
ram. BTW, although I have never used this program
(http://www.sysinternals.com/Utilities/Portmon.html), perhaps Portmon
could be helpful
Is anyone running their sdr1000 using the standard parallel port at
the same time as running an hp 9650 or hp 2600 printer attached to usb?
Under Windoze XP? With no problems?
Does anyone know if the hp usb printer drivers access or probe the
parallel port? I am having trouble with several
ping
C:\sysftp ftp.flex-radio-friend.net
Unknown host ftp.flex-radio-friend.net.
ftp bye
C:\sysftp flex-radio-friend.net
Unknown host flex-radio-friend.net.
ftp bye
What am I doing wrong? I would like to see these.
Richard W5SXD
Robert McGwier [EMAIL PROTECTED] wrote:
(11/22/2005 21:22)
We have an
the ripple and the
delay elements they imply.
Bob
richard allen wrote:
One more time.
-Original Message-
From: richard allen [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 23, 2005 7:36 AM
To: 'Robert McGwier'
Cc: [EMAIL PROTECTED]
Subject: RE: [Flexradio] Impulse Wave file
Looks
and will do the file again. We definitely need the equalizer.
Bob
richard allen wrote:
In our military system tests we acquire 10-20 impulses and sum them
in the frequency domain. If the ripple is actually in the system
then it will stay in. This was what the generals all wanted. In our
see http://gcc.gnu.org
They invented GPL :)
Richard W5SXD
ecellison [EMAIL PROTECTED] wrote:
(11/23/2005 18:09)
Folks
I could probably search, but is there a C or Visual C compiler for Windows
in GPL? Like the SharpDevelop program is for C#?
Got my Xylo board up and running and would
; i(int)udImpulseNum.Value; i++)
{
console.hw.Impulse();
Thread.Sleep(45);
}
}
Nothing special or fancy. Fire, wait, fire, wait.
richard allen wrote:
Looks like there is about 50 ms between them.
see http://rcallen.com/iqimps.png
Eric,
My earlier reply was probably not too useful. I've not used any free
C for windoze but there is one that runs under dos called djgpp. see
http://www.delorie.com/djgpp/
http://clio.rice.edu/djgpp/win2k/main.htm talks about a late version
that will evidently rununder2000 and xp.
Others
Ross,
1296, 23 cm, is probably the simplest band to get on and there is a
bunch of activity worldwide. Plug EME into your favorite search
engine and spend a few weeks there.
See http://www.kuhne-electronic.de/english/frameset.htm for a 28 MHz -
1296 MHz transverter, 200 w or bigger amp, and
Ross,
1296, 23 cm, is probably the simplest band to get on and there is a
bunch of activity worldwide. Plug EME into your favorite search
engine and spend a few weeks there.
See http://www.kuhne-electronic.de/english/frameset.htm for a 28 MHz -
1296 MHz transverter, 200 w or bigger amp, and
Is any one using 1.4.5.5 with the new keyer internal iambic and
paddles connected to the key in on the sdr1000 (connections:primary:
'SDR')? When set to 60 wpm on the panel I get about 18.
Richard W5SXD
the mouse wheel to tune (not
hovering, mind you). This snaps to 1kHz frequencies. Are you suggesting
that we do the same with click tuning?
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of richard allen
Sent: Saturday, November
Has anyone run the M-Audio Delta 44 with the last version of
SDRConsole? I'm having no luck. It work fine with PowerSDR, of course.
Richard W5SXD
DirectSound in the VB version.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of richard allen
Sent: Saturday, November 12, 2005 6:36 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] SDRConsole+delta44
Has anyone run
That may be. I saw the same error in the 10m bandstack using
imported database from 1.4.5.4. I went back and started from scratch
not importing the old database and the error went away.
It may have something to do with the addition of the NCDXF beacon
identifiers.
Richard W5SXD
Tim Ellison
The creative mp3+ and extigy both work fine on my laptop. I have not
yet tried the firebox. They do eat up a bunch of extra cpu cycles
and performance is right on the edge with a 1000 MHz P4 laptop.
There are several others. Which one do you have?
Richard W5SXD
Robert [EMAIL PROTECTED]
It would be nice to be able to instruct the cursor to only stop at
even 1 kHz positions
whilst moving around the panadaptor display. An amazingly large
number of ssb qso's
are one 1 kHz boundries so tuning with the cursor would be a nice
'snap to' operation.
Richard W5SXD
version 1.4.5.5 delta-44:
new keyer. Is the wpm suppossed to be correct? It seems to run at
about 1/3 of the indicated rate. Primary:SDR Iambic ... dsp buffer
1024, audio 2048
Richard W5SXD
Edgeport make models from 1 to 16 ports. They work well under XP Pro
with any programs that use the standard non-legacy drivers.
Richard W5SXD
Jim Lux [EMAIL PROTECTED] wrote:
(11/10/2005 16:06)
Folks,
I've got a need to have more than one RS232 hooked up to the legacy free
laptop I now
And for free you can have the classic hp41 running on your windoze
desktop and/or your pocketpc. The folks actually use the roms from
the real hp41 and wrote a processor to emulate the machine. It
therefore works EXACTLY like the original. Great stuff. See them
both at http://www.hp41.org
Can someone tell me how to make a recording? Playback works fine. I
press record and it lights up. I then press it again and it goes off.
Where's the file? I'm using 1.4.4 and was trying to record the v31
expedition.
Richard W5SXD
V31LL has 599 signal into north Texas on 7.005 at 0415Z 2005-10-27
working KM0T and me and others. Great sounding radio :)
Richard W5SXD
Well done, Stan.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of W4MQ -- Stan
Sent: Tuesday, October 25, 2005 5:10 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Thanks -- SDR-100 has found its home
Thanks to all and there were certainly lot of
Would someone please advise me of the Sunday net time and frequency?
Thanks,
Richard W5SXD
John,
It would be nice to have all the parameters saved. The problem is that
on restoration you may only want the frequencies and some off the wall
parameter that gets unknowingly restored on a recall will send you
scurrying to find what is wrong and, you will have lost the previous
setting.
Has anyone had success with the 1.4.5 paddle/keyer input on a usb/serial
port as opposed to a legacy true hardware port? Mine works fine on the
LPT input but not my serial/usb dongle.
Richard W5SXD
panel on the SDR-1000. It could be that
we have fixed issues with the Beta v1.4.5 Preview 1 since it was
released in house though.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of richard allen
Sent
1 - 100 of 104 matches
Mail list logo