[Flexradio] Beginner Needs Help

Hello, I am trying to set up MixW with the SDR-1000. I have MixW v2.16b8 and SDR-1000 v 1.4.5BP7. I have problems in both BPSK31 and CW. First BPSK31. I followed the steps in Bob's paper exactly through figure 12. MixW receives ok. On Transmit. the power level fluctuates between 0 and

Re: [Flexradio] Beginner Needs Help

Charles Greene wrote: Hello, I am trying to set up MixW with the SDR-1000. I have MixW v2.16b8 and SDR-1000 v 1.4.5BP7. I have problems in both BPSK31 and CW. First BPSK31. I followed the steps in Bob's paper exactly through figure 12. MixW receives ok. On Transmit. the power level

Re: [Flexradio] Beginner Needs Help

Charles, If you are having power fluctuations, the first thing to check is that the audio driving the hardware sounds correct. Try turning on the monitor (MON button on top left section of front panel). This will play the transmit audio through your speakers. Does it have audible glitches?

Re: [Flexradio] Beginner Needs Help

Charles, Once you verify the items Eric suggested, feel free to contact me off list. I have MixW 2.16 (no beta) running very well with PowerSDR 1.4.5p7 using VAC, VCOM and the Delta 44 sound card. I'm doing CW (keyboard) and all ASFK modes. Is this your basic configuration? -Tim --- Tim

Re: [Flexradio] Linux: was Scope Black Out

Ken N9VV wrote Python version of the console? - I remember reading some very encouraging info about the progress that Bob G3UKB was making on his Python implementation. The Python project is mothballed at the moment for a number of reasons. It's

Re: [Flexradio] BSD occurred while changing frequencies using BSR w/ 1.4.5p7

Let me add my thanks to both Phil and Tim. So far as I am able to tell, VAC 3.11 is completely and totally solid. I have not had a Blue Screen of Microsoft Hades since I installed it. In addition, it seems to be handling other things going on on the computer in a much better manner. It

Re: [Flexradio] RF Output down 50% from preview7

I did a little more testing with Preview 8 and if I am using VAC (no TX audio chain processing) I get the same power output as Preview 7. Without VAC the output still seem to be down about 40-50%. Has anyone else noticed this behavior with Preview 8? -Tim --- Tim Ellison ( [EMAIL PROTECTED] )

[Flexradio] Question about Auto Power on

Hello to all, I plan to put the sdr1k in a solid case together with a small itx-mainboard, 8'' LCD and shuttle pro controller. Power SDR will be in the autostart-folder. Is there a way to start the radio without taking a mouse and click the ON-button ? Maybe I take a Touchscreen LCD but in this

Re: [Flexradio] Beginner Needs Help

Tnx to all who responded. I will check the things suggested and report back in a couple of days. Tim, I am using the setup you are except I am using the Firebox sound system. 73, Chas W1CG At 11:44 AM 12/21/2005, you wrote: Charles, Once you verify the items Eric suggested, feel free to

Re: [Flexradio] Linux: was Scope Black Out

Bob Sounds like you are branching out to hardware! Recently a group of Flexers and others got together an offshoot fourm based on a little FPGA project board called the Xylo. We took it off the Flex Reflector since it is a little off topic and there was a lot of interest and activity.

[Flexradio] Unhandled Exceptions after new graphics install

Hello, all. After upgrading my CPU from an Athlon XP 1800+ to a XP 2600+ I was running v1.4.4 without a problem. I also upgraded from 512 mb of ram to 1024 mb. However, after upgrading to a new video graphics card, I have the following errors on all versions of PowerSDR Console, including

[Flexradio] Notch at 2kc Preview 8

Hi Noticed a notch in the audio pass band at 2kHz LSB. Monitoring either D44 1,2 output or via VAC (3.11) . Doesn't matter what mode. Tried it USB, LSB, CW (2.125Hz pitch) or RTTY. GDI+ or DirectX no change. Going back to prior PowerSDR does not show this hole in the pass band.