ment(s).
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/37f7fa85/attachment.html>
%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
>
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/30c2bbff/attachment.html>
You might want to try the compatibility patch I made for Frame 7.x so that
it works better with Windows 7. You can find it here at the end of the
Downloads page:
http://www.siliconprairiesoftware.com/Downloads.html
This application uses a compatibility shim to control settings for the
FrameMaker
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/a073dcff/attachment.html>
At the risk of sounding unlearned, how does one check whether patches were
properly applied?
Beverly
From: Writer [mailto:generic...@yahoo.ca]
Sent: Friday, September 09, 2011 2:59 PM
To: Beverly Robinson; Post Framers
Subject: Re: Vertical line at right edge of graphics frame
Another user had
I'm on Frame 8.0p277, and I occasionally get that. I select the anchored
frame, set the pen to "none" (even though, yes, it's already set to "none"),
save, and re-save the book as pdf, and that usually resolves it.
Not that helpful, maybe, but that's my workaround. It only happens
occasionally to
Another user had a very similar problem
(http://lists.frameusers.com/pipermail/framers/2010-April/019885.html), but she
resolved it by applying the (then) latest patch.
According to your post, you are all patched up. Maybe it's worth checking to
see if all of your patches were properly applied?
ramers/generic668%40yahoo.ca
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
>
>
>
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/32e37662/attachment.html>
No sorry, I haven't tried it. I've just seen it recommended on the Adobe forums
to solve Win7 issues with older versions of software.
-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Friday, September 09, 2011 12:06 PM
To: Jeff Coatsworth; 'framers at lis
st...@siliconprairiesoftware.com wrote:
> You might want to try the compatibility patch I made for Frame 7.x so
> that
> it works better with Windows 7. You can find it here at the end of the
> Downloads page:
>
> http://www.siliconprairiesoftware.com/Downloads.html
>
> This application uses a
steve at siliconprairiesoftware.com wrote:
> You might want to try the compatibility patch I made for Frame 7.x so
> that
> it works better with Windows 7. You can find it here at the end of the
> Downloads page:
>
> http://www.siliconprairiesoftware.com/Downloads.html
>
> This application uses
Environment:
TCS 2 (FrameMaker 9p255)
Windows 7 (also seen in XP SP3)
.png images created from CorelDraw X5 (also seen in screen captures done with
Snagit 7-I know, it's old)
Images imported by reference to graphics frames anchored to a Body paragraph
Image resolution typically 300 dpi (
w.maptek.com
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/3ba46abb/attachment.html>
You might want to try the compatibility patch I made for Frame 7.x so that
it works better with Windows 7. You can find it here at the end of the
Downloads page:
http://www.siliconprairiesoftware.com/Downloads.html
This application uses a compatibility shim to control settings for the
FrameMaker
will not change and since we have a large
number of manuals, I would like to make this as automatic as possible.
Is there any way to do this?
Thanks for any ideas.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/frame
Just curious Richard - did you try running it in the Win7 virtual XP machine to
see if it made any difference than XP compatibility mode?
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Combs, Richard
Sent: Fri
I have Frame 7.2 running on a new Windows 7 desktop system and haven't run into
any problems, so far. No special steps to install.
--- On Fri, 9/9/11, Jeff Coatsworth wrote:
From: Jeff Coatsworth
Subject: RE: Is FM 7.2 compatible with Windows 7?
To: "'framers@lists.frameusers.com'"
Date: Frid
meusers.com/ for more resources and info.
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.frameusers.com/pipermail/framers/attachments/20110909/eced37ee/attachment.html>
No sorry, I haven't tried it. I've just seen it recommended on the Adobe forums
to solve Win7 issues with older versions of software.
-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Friday, September 09, 2011 12:06 PM
To: Jeff Coatsworth; 'framers@lists.
Jeff Coatsworth wrote:
> Just curious Richard - did you try running it in the Win7 virtual XP
> machine to see if it made any difference than XP compatibility mode?
No, I haven't installed Virtual PC. Maybe I'll try that at some point. Have you
used it? If so, how does the performance hit comp
Jeff Coatsworth wrote:
> Just curious Richard - did you try running it in the Win7 virtual XP
> machine to see if it made any difference than XP compatibility mode?
No, I haven't installed Virtual PC. Maybe I'll try that at some point. Have you
used it? If so, how does the performance hit compa
I'll have to take a closer look at my files. I have only one set of
manuals that use graphics extensively, and they're all screen shoots. When
I need to do captions, I embed the captions in a tool like SnagIt or
Visio. I rarely use Frame's graphic tools - about the only use I make of
them is to
Hi Keith,
It is usually graphics with text in text frames on top of them.
Rick
In looking at some of my files, the problem seems to be in the ones with
graphics, so I guess I'm going to have to try Rick's plugin.
Regards
Keith
--
Keith Soltys
Senior Technical Writer
Architecture
TMX Group
(416
ttp://lists.frameusers.com/pipermail/framers/attachments/20110909/3e378e28/attachment.html>
Just curious Richard - did you try running it in the Win7 virtual XP machine to
see if it made any difference than XP compatibility mode?
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Combs, Richard
Sent: Friday
Hossack, Julia wrote:
> I am using FM 9 with no problems, but there are others in this company
> who are using 7.2. They would like to find out whether there is a
> compatibility issue before they migrate to Win 7.
After I was forced to move to Win 7, FM 7.2 crashed every time I drag-selected
t
Hossack, Julia wrote:
> I am using FM 9 with no problems, but there are others in this company
> who are using 7.2. They would like to find out whether there is a
> compatibility issue before they migrate to Win 7.
After I was forced to move to Win 7, FM 7.2 crashed every time I drag-selected
te
Hi Keith,
It is usually graphics with text in text frames on top of them.
Rick
In looking at some of my files, the problem seems to be in the ones with
graphics, so I guess I'm going to have to try Rick's plugin.
Regards
Keith
--
Keith Soltys
Senior Technical Writer
Architecture
TMX Group
(416
Hi Brian,
Two condition formats are used to mark the text: Inserted and Deleted. You
can edit these condition formats and change their colors, etc. Please let me
know if you have any questions or comments. Thank you very much.
Rick Quatro
Carmen Publishing Inc.
585-659-8267
r...@frameexp
Frame 9 on XP.
When I compare two FrameMaker files and look at the xxxCMP file, the strike-out
text is in RED, and the other text that is different is in GREEN. The Green
color is kind of hard to read. Can I change these colors?
Thanks,Brian___
You a
I am using FM 9 with no problems, but there are others in this company who are
using 7.2. They would like to find out whether there is a compatibility issue
before they migrate to Win 7.
Thanks,
Julia
[CONFIDENTIALITY AND PRIVACY NOTICE]
Information transmitted by this email is proprietary t
In looking at some of my files, the problem seems to be in the ones with
graphics, so I guess I'm going to have to try Rick's plugin.
Regards
Keith
--
Keith Soltys
Senior Technical Writer
Architecture
TMX Group
(416) 947-4397
http://www.tmx.com/
"Rick Quatro" wrote on 09/08/2011 07:45:05 AM:
32 matches
Mail list logo
