Frank Mayhar wrote:
Nick Sayer wrote:
Frank Mayhar wrote:
Well, this doesn't help me a whole lot with pcm.
I think it does. Try configuring pcm0 at 0x534 (4, not 0), irq 5,
dma 0, flags 0x11 (presuming the BIOS says 0x530, irq 5, dma 0 1).
This did work for me once upon a time,
On Mon, 10 Jan 2000, Stephen McKay wrote:
The problem is that calcru() thinks that P_INMEM means that the proc
structure is fully and accurately populated. But P_INMEM is one of the
first flags set.
So, calcru() and possibly some other places, are looking at a struct proc
before it's all
At least from the January 9 after 'cvsup',
'make buildworld','make installworld', 'make install kernel'
I can't 'kldload linux'. 'Kldload" says:
kldload: can't load linux: Exec format error
and /kernel says:
/kernel: link_elf: symbol NDFREE undefined
This is obviously
so, ok,
i've tried several checkout dates for sys and tested the compiled kernels.
as i cannot reproduce this freeze thing, this is quite vague, but kernels
up to 04 Jan 2000 worked fine, those from 05 Jan 2000 up to now don't.
maybe, this is useful information.
--
Christian
To
On Tue, 11 Jan 2000 [EMAIL PROTECTED] wrote:
At least from the January 9 after 'cvsup',
'make buildworld','make installworld', 'make install kernel'
I can't 'kldload linux'. 'Kldload" says:
Probably one of these is not up to date, or is out of sync. I had this
problem yesterday when
On Mon, 10 Jan 2000, Stephen McKay wrote:
The problem is that calcru() thinks that P_INMEM means that the proc
structure is fully and accurately populated. But P_INMEM is one of the
first flags set.
So, calcru() and possibly some other places, are looking at a struct proc
before it's all
On Tue, Jan 11, 2000 at 01:41:18AM -0800, Kris Kennaway wrote:
On Tue, 11 Jan 2000 [EMAIL PROTECTED] wrote:
At least from the January 9 after 'cvsup',
'make buildworld','make installworld', 'make install kernel'
I can't 'kldload linux'. 'Kldload" says:
Probably one of these is
* Christian Carstensen [EMAIL PROTECTED] [000111 02:03] wrote:
so, ok,
i've tried several checkout dates for sys and tested the compiled kernels.
as i cannot reproduce this freeze thing, this is quite vague, but kernels
up to 04 Jan 2000 worked fine, those from 05 Jan 2000 up to now
On Tue, 11 Jan 2000, Brian Fundakowski Feldman wrote:
On Mon, 10 Jan 2000, Stephen McKay wrote:
The problem is that calcru() thinks that P_INMEM means that the proc
structure is fully and accurately populated. But P_INMEM is one of the
first flags set.
So, calcru() and possibly
* Edwin Mons [EMAIL PROTECTED] [000111 03:37] wrote:
Marc Solsona wrote:
I'm using wdm o the 3-stable branch. Since I migrated to current wdm is
not reponding to keyboard. Although when I start it manually it does.
Any ideas?
Thanks
To Unsubscribe: send mail to [EMAIL
Charlie wrote:
On Tue, Jan 11, 2000 at 01:41:18AM -0800, Kris Kennaway wrote:
On Tue, 11 Jan 2000 [EMAIL PROTECTED] wrote:
At least from the January 9 after 'cvsup',
'make buildworld','make installworld', 'make install kernel'
I can't 'kldload linux'. 'Kldload" says:
Hi,
It seems than long-standing problem (see PR dated May '97:
http://www.FreeBSD.org/cgi/query-pr.cgi?pr=3441) with C++ exceptions in shared
libraries is still here. It affects both -current and -stable branches and
prevents some modern software (Mico for example) from functioning properly.
Hi All,
After cvsup last night:
FreeBSD relativity.student.utwente.nl 4.0-CURRENT FreeBSD 4.0-CURRENT #0:
Tue Ja n 11 04:48:17 CET 2000
[EMAIL PROTECTED]:/usr/src/sys/compi le/RELATIVITY4 i386
which includes the latest softupdates changes, I still experience random
system hangs, however not
On Tue, 11 Jan 2000, Alfred Perlstein wrote:
are you running vinum or softupdates? Kirk just fixed softupdates and
I committed a patch to vinum just last night.
yes, i am running vinum and softupdates. i've checked out the recent
sources some minutes ago, and making a new world. this will
On Fri, Jan 07, 2000 at 09:28:47AM -0800, David O'Brien wrote:
On Fri, Jan 07, 2000 at 01:29:27PM +0200, Sheldon Hearn wrote:
I think lint(1) might work with this given the following small patch.
I agree that lint might should continue to use /usr/libexec/cpp rather
than switch to
[EMAIL PROTECTED] wrote:
In [EMAIL PROTECTED] Peter Wemm peter@netple
x.com.au wrote:
Charlie wrote:
On Tue, Jan 11, 2000 at 01:41:18AM -0800, Kris Kennaway wrote:
On Tue, 11 Jan 2000 [EMAIL PROTECTED] wrote:
At least from the January 9 after 'cvsup',
'make
Both solutions seem to work with xdm, but not with wdm. It's not a big trauma
but may be I should contact the wdm mantainer.
Marc
Alfred Perlstein wrote:
* Edwin Mons [EMAIL PROTECTED] [000111 03:37] wrote:
Marc Solsona wrote:
I'm using wdm o the 3-stable branch. Since I migrated to
On Tue, Jan 11, 2000 at 08:44:48PM +0800, Peter Wemm wrote:
Can somebody with CURRENT system test 'kldload' some
of the above modules on his machine and post the results ?
First of all, can you try this please?
nm /kernel | grep NDFREE
c0186b64 T NDFREE
This is to check that
In [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
In the meantime I make another test - reboot the
system and on the loader prompt say:
disk2s1a load modules/linux.ko
disk2s1a boot
and the system boots up successfully and
kldstat shows 'linux.ko' module and Linux version of the
"Cameron Grant" [EMAIL PROTECTED] writes:
would everyone who currently has an issue outstanding with newpcm please
report it to me in the next few days directly, please, so i can get an idea
of what needs work before release. i need as much detail as possible.
My SB128 still doesn't attach:
On 11/01 07:39, Andreas Klemm wrote:
Where 4 MB isn't sufficient anymore with a GENERIC kernel. You need at least
6 MB or so to boot, then compile a custom kernel and then, if you are lucky,
can perhaps run with 4 MB.
Here are the two constituent process of a compilation spotted earlier
"Cameron Grant" [EMAIL PROTECTED] writes:
would everyone who currently has an issue outstanding with newpcm please
report it to me in the next few days directly, please, so i can get an idea
of what needs work before release. i need as much detail as possible.
My ess1869, current as of
Dag-Erling Smorgrav wrote:
"Cameron Grant" [EMAIL PROTECTED] writes:
would everyone who currently has an issue outstanding with newpcm please
report it to me in the next few days directly, please, so i can get an idea
of what needs work before release. i need as much detail as possible.
On Mon, Jan 10, 2000 at 02:21:56PM -0800, Alfred Perlstein wrote:
* Matthew Dillon [EMAIL PROTECTED] [000110 12:11] wrote:
I've reproduced the softupdates ftruncate panic and have a core dump
to play with.
I don't have a panic, but rather many processes start to get stuck
in
On Tue, Jan 11, 2000 at 01:10:10PM +0100, Dave J. Boers wrote:
So I guess some problems still remain.
replying to self here
I have had the second occurence of the hang and I can provide some more
information this time.
The thing that hang's is disk i/o. The system continues to work
Since this was publically announced I can forward this to the group.
I wish the *bsd's were included.
(Odd text and formatting below is due to Lotus Notes)
--
Daniel Ortmann, IBM Circuit Technology, Rochester, MN 55901-7829
[EMAIL PROTECTED] or [EMAIL PROTECTED] and 507.253.6795 (external)
FWIW, a couple weeks ago, I saw the same problem over NFS when autoconf
tried to test for gtk-config... It would pretty consistantly hang...
robert.
Pascal Hofstee writes:
On Mon, Jan 10, 2000 at 02:21:56PM -0800, Alfred Perlstein wrote:
* Matthew Dillon [EMAIL PROTECTED] [000110 12:11]
On my notebook I have pnp CS4232.
It has to work in duplex mode - 2 dmas, but it's
buggy,
and works only in simplex mode - 1 dma (play +
capture).
Is it possible to add a option to force using of
simplex mode on pnp cards?
Thanks,
Val
__
Do You
FYI,
Dave Boers wrote:
This is an SMP system with the ATA driver and with Kirk's latest
softupdates changes included.
same here on an SMP system, sym-scsi driver and softupdates;
(BTW, I installed sunday's sources on a mono-processor, sym-scsi, softupdates,
system without apparent problems)
Everyone, make sure you are using at least version 1.47 of
ffs_softdep.c.
If you manage (with the latest ffs_softdep.c ... 1.47) to get a lockup
and your system still works well enough to run commands, and you were
smart enough to keep your kernel.debug lying around, then
Is this a bug, or did I miss something on the list
that changed this procedure:
cd /usr/src/sys/i386/conf)
bash-2.03# config MYMACHINE
config: files.i386: No such file or directory
bash-2.03# exit
The files.* is missing, etc. No changes after a cvsup.
_F
To Unsubscribe: send mail to
Out of da blue Forrest Aldrich aka ([EMAIL PROTECTED]) said:
Is this a bug, or did I miss something on the list
that changed this procedure:
cd /usr/src/sys/i386/conf)
bash-2.03# config MYMACHINE
config: files.i386: No such file or directory
bash-2.03# exit
The files.* is missing,
Recently there has been a change in config directory layout (all *.i386
files has been moved from /sys/i386/conf to /sys/conf), so you have to
rebuild /usr/sbin/config first.
HTH,
Eugene
PS. PACBELLThe Handbook is, once again, your friend :-)/PACBELL.
On Tue, 11 Jan 2000, Forrest Aldrich
On Tue, Jan 11, 2000 at 07:39:40AM +0100, Andreas Klemm wrote:
On Mon, Jan 10, 2000 at 04:55:43PM +, George Cox wrote:
G'day,
While compiling a kernel today, I noticed that the '-pipe' option to gcc
was not being used. Is there any reason for this?
I think this is the
On Tue, 11 Jan 2000, Pascal Hofstee wrote:
I just experienced the same thing here on my CURRENT system with Kirk's
latest SoftUpdates patches included. i have right now a buildworld stuck in
"getblk" on rm ... and a "getblk" hang for Mozilla Tinderbox Build on gcc.
The Mozilla Tinderbox
On Fri, 7 Jan 2000, David O'Brien wrote:
This is a heads up to let you know that you need to
rm -f /sbin/chwon /bin/chgrp
after your next `make world'. Additionally you need to install a new
/dev/MAKEDEV (mergmaster(8) will assist you in this).
A while back I moved the install
In message [EMAIL PROTECTED] Doug
Russell writes:
: See, I knew there was a reason I hung on to all these 1M 30 pin SIMMs. :)
: Old 386/40s sure make nice little router/modem/whatever boxes. :)
Until their hard disks go south :-(. The biggest problems I have with
them is that they also tend
A buildworld done in the last hour with a fresh cvsup fails with the
following:
touch opt_usb.h
echo ukbd.h
echo '#define KBD_INSTALL_CDEV 1' opt_kbd.h
rm -f .depend
mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE -I- -I. -I@ -I@/../
include -I/usr/obj/usr/src/i386/usr/include
On Tue, Jan 11, 2000 at 01:53:10PM -0700, Warner Losh wrote:
In message [EMAIL PROTECTED] Doug
Russell writes:
: See, I knew there was a reason I hung on to all these 1M 30 pin SIMMs. :)
: Old 386/40s sure make nice little router/modem/whatever boxes. :)
Until their hard disks go south
I often want to know where in a "make world" I am, so I wrote this
quick little script. It breaks out the major sections, like
--
Cleaning up the elf obj tree
--
and the
On Tue, Jan 11, 2000 at 10:21:48AM -0800, Matthew Dillon wrote:
Everyone, make sure you are using at least version 1.47 of
ffs_softdep.c.
I have.
I think there may still a problem but I haven't been able to reproduce
it yet.
Don't know if this helps, but the problem seems
In message [EMAIL PROTECTED] Brooks Davis writes:
: On Tue, Jan 11, 2000 at 01:53:10PM -0700, Warner Losh wrote:
: In message [EMAIL PROTECTED] Doug
:Russell writes:
: : See, I knew there was a reason I hung on to all these 1M 30 pin SIMMs. :)
: : Old 386/40s sure make nice little
On 2000-Jan-12 07:58:12 +1100, Brooks Davis [EMAIL PROTECTED] wrote:
I think that's why IBM has jumpers on some of their disks that limit
them to 2GB. I can't see why else you would want to take a perfectly
good 8GB+ disk and use it as a 2GB drive.
The volumes probably mean it's not
Before you ask, I've also tried to use the tapr[*] CF - IDE adapter to
see if I could get these systems to boot off a 16MB CF card with no
luck. I even have a mini486 based system from NEC that I bought
surplus that I thought could use the CF card, but no joy. Works great
on all the modern
On Tue, Jan 11, 2000 at 01:32:49PM -0700, Doug Russell wrote:
On Tue, 11 Jan 2000, Wilko Bulte wrote:
FWIW: 3.3R ran (crawled?) in 4Mb. I tried it 2 months ago on a 386SX40 with
4Mb.
Compiling a GENERIC kernel was 5 hours or so ;-) That is when I gave up
on my idea to 'make
I'm currently dealing with an increasing set of *very* large files,
most of them in the order of gigabytes. It becomes impossible to
figure the size of a file with ls -l with 9 or more digits displayed.
I would propose a new flag to ls which will together with option -l
change the unit to
Hi all,
I propose to change rc.network in the way that portmapper and the
nfs services are started _before_ any nfs filesystems get mounted.
This will fix loopback and local mounts in fstab. But cause portmap
is located in /usr/sbin, we have to move it into /sbin, else some
nfs mounted /usr
On Wed, Jan 12, 2000 at 11:04:56AM +1300, Joerg Micheel wrote:
[ls whith sizes in k,M]
Would such a patch find the blessing of the team and the maintainer
of ls ?
You could try gnuls -h
-fn-
--
~/.signature not found: wellknown error 42
To Unsubscribe: send mail to [EMAIL PROTECTED]
On Tue, Jan 11, 2000 at 11:23:54PM +0100, Frank Nobis wrote:
On Wed, Jan 12, 2000 at 11:04:56AM +1300, Joerg Micheel wrote:
[ls whith sizes in k,M]
Would such a patch find the blessing of the team and the maintainer
of ls ?
You could try gnuls -h
As much as I tried - this is not
Joerg Micheel wrote:
On Tue, Jan 11, 2000 at 11:23:54PM +0100, Frank Nobis wrote:
On Wed, Jan 12, 2000 at 11:04:56AM +1300, Joerg Micheel wrote:
[ls whith sizes in k,M]
Would such a patch find the blessing of the team and the maintainer
of ls ?
You could try gnuls -h
As
On Wed, Jan 12, 2000 at 11:35:28AM +1300, Joerg Micheel wrote:
On Tue, Jan 11, 2000 at 11:23:54PM +0100, Frank Nobis wrote:
On Wed, Jan 12, 2000 at 11:04:56AM +1300, Joerg Micheel wrote:
[ls whith sizes in k,M]
Would such a patch find the blessing of the team and the maintainer
of
On Wed, Jan 12, 2000 at 11:35:28AM +1300, Joerg Micheel wrote:
You could try gnuls -h
As much as I tried - this is not within GNU fileutils. Which version and
package are you referring to ? Are you using a FreeBSD system ?
Joerg
Hi!
Have you tried it in:
/usr/ports/misc/gnuls ?
[Charset windows-1252 unsupported, skipping...]
Arghh... windblows...
I'm currently dealing with an increasing set of *very* large files,
most of them in the order of gigabytes. It becomes impossible to
figure the size of a file with ls -l with 9 or more digits displayed.
I would
At 2:49 PM -0800 1/11/00, Rodney W. Grimes wrote:
Another thing that ``works for me''. Only make it ki, mi, and gi
to fit with the new binary mode international appreviation standards,
unless of cource you use base 10 divisors.
Why not KB, MB or GB, since that's what you're actually
Hello, looks like I'll join the fray as well.
I've just turned on IPSec between two machines, an i386 and Alpha,
both running very recent currents, each has the IPSEC and IPSEC_ESP
config options set, but does not have IP6 support enabled. I used
setkey and could establish what appear to
"Cameron Grant" [EMAIL PROTECTED] writes:
would everyone who currently has an issue outstanding with newpcm please
report it to me in the next few days directly, please, so i can get an idea
of what needs work before release. i need as much detail as possible.
SB AWE64 (ISA) works fine
Garance A Drosihn wrote:
[trimmed list of recipients to just -current]
personally, I'd just as soon use K, M, and G and have it mean
the base-10 values. If I'm looking at a decimal number for one
file (because it's small enough), I don't want a base-2 version
of the similar number for some
Hi,
I've got sound working on my laptop with ESS1878 with -current as of Jan 10th:
sbc1: ESS ES1878 at port 0x220-0x22f,0x388-0x38b,0x300-0x301 irq 7 drq 1,0 on isa0
pcm0: SB DSP 3.01 (ESS mode) on sbc1
Anyone mind if I commit the following patch to add support for this chip?
Index: sbc.c
Have people seen these?
=== node82 1/2 ===
bash-2.02# gdb -k *.22
GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show
I figured I'd address these two issues in one posting here. First of
all, does anyone work with Mozilla by checking out the source code by
anon cvs? One of the build stages does a "cvs co" when you do gmake
-f client.mk. There's a lot of long pauses where you see a lot of
"waiting for lock
On Tue, Jan 11, 2000 at 01:32:49PM -0700, Doug Russell wrote:
On Tue, 11 Jan 2000, Wilko Bulte wrote:
FWIW: 3.3R ran (crawled?) in 4Mb. I tried it 2 months ago on a 386SX40 with
4Mb.
Compiling a GENERIC kernel was 5 hours or so ;-) That is when I gave up
on my idea to 'make
Oops, sorry. Apply the attached patch to /sys/modules/ukbd/Makefile.
Kazu
A buildworld done in the last hour with a fresh cvsup fails with the
following:
touch opt_usb.h
echo ukbd.h
echo '#define KBD_INSTALL_CDEV 1' opt_kbd.h
rm -f .depend
mkdep -f .depend -a -nostdinc -D_KERNEL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 11 Jan 2000, Rodney W. Grimes wrote:
Because KB MB and GB mean different things than KiB MiB and GiB.
K = 10^3, Ki = 2^10
M = 10^6 Mi = 2^20
G = 10^9 Gi = 2^30
Why not use Knuth's (good) suggestion for differentiating these
On Tue, 11 Jan 2000, Donn Miller wrote:
I figured I'd address these two issues in one posting here. First of
all, does anyone work with Mozilla by checking out the source code by
anon cvs? One of the build stages does a "cvs co" when you do gmake
They should use cvs -R to do it read-only..
:hi,
:
:I just discovered some strange points about using vn devices (files) as
:swap devices.
:
:I have placed below some output gathered with script(1) and now
:some comments.
:
:1) I can easy unconfigure vn device which already mounted as swap device
:and then remove swapfile without any
At 2:49 PM -0800 1/11/00, Rodney W. Grimes wrote:
Another thing that ``works for me''. Only make it ki, mi, and gi
to fit with the new binary mode international appreviation standards,
unless of cource you use base 10 divisors.
Why not KB, MB or GB, since that's what you're
On Sun, Jan 09, 2000 at 02:20:51PM -0800, William Woods wrote:
Running 4.0 -current as of today.on a DEC Alphaststion 233 when I dial out
I connect for about 30 seconds then it dies...here is a copy of the ppp.log
I got the same thing once in a while. I'm using PPPoE. I cannot quote
Running 4.0 -current as of today.on a DEC Alphaststion 233 when I dial out
I connect for about 30 seconds then it dies...here is a copy of the ppp.log
[.]
Well, you're receiving data from the peer, but the peer is not
sending any response to your config request. From what I can see,
:Have people seen these?
:
:#0 0xc012fbd0 in boot ()
:(kgdb) bt
:#0 0xc012fbd0 in boot ()
:#1 0xc012ff54 in poweroff_wait ()
:#2 0xc01c75d5 in ffs_blkfree ()
:#3 0xc01cb626 in handle_workitem_freeblocks ()
:#4 0xc01c9bbf in softdep_process_worklist ()
:#5 0xc0156ff3 in sched_sync ()
:#6
+[ Brian Somers ]-
| Running 4.0 -current as of today.on a DEC Alphaststion 233 when I dial out
| I connect for about 30 seconds then it dies...here is a copy of the ppp.log
| [.]
|
| Well, you're receiving data from the peer, but
Reinier Bezuidenhout wrote:
I'm also experiencing a dely in sound on most games ... on some
it's up to 7 seconds behind the action of the game ...
Xgalaga is an example of this delay
Any ideas ...
Luigi Rizzo explained this behavior in the old pcm driver
about a year or so ago.
Peter Wemm wrote:
Try changing the 'device pcm0 at .' to this:
options PNPBIOS
device pcm0
with *no* 'at isa?'. See what happens. If it shows up in the pnp id tags but
isn't recognized, show us the 'unknown*' lines from dmesg.
Tried that. The config and dmesg output follows. (It
On Tue, 11 Jan 2000, Bruce Evans wrote:
I broke calcru() with the monotonicity fixes (kern_resource.c rev.1.45
(1999/03/13). Accessing p-p_stats at interrupt time is only valid if
p == curproc.
Fix: move the new monotonicity fields from struct pstats to struct
proc. I only put them in
How do I disable compression
On 12-Jan-00 Andrew Kenneth Milton wrote:
+[ Brian Somers ]-
| Running 4.0 -current as of today.on a DEC Alphaststion 233 when I dial
| out
| I connect for about 30 seconds then it dies...here is a copy of the
|
%
%:
%:On Tue, Jan 11, 2000 at 10:21:48AM -0800, Matthew Dillon wrote:
%: Everyone, make sure you are using at least version 1.47 of
%: ffs_softdep.c.
%:
%:I have.
%
%Wait a sec. I've reviewed all the messages from you and I think something
%got mixed together. I'm not
:%:I have.
:%
:%Wait a sec. I've reviewed all the messages from you and I think something
:%got mixed together. I'm not convinced that your particular problems
:%are softupdates related. I recommend turning off softupdates entirely
:%for a few days to find out.
:
:Oh they are
To:[EMAIL PROTECTED]
Hi all,
I am trying to compile this database programme - mumps10freebsd32x86.tgz ,
("MUMPS" can be download from www.mumps.org) which currently works only
on i386 FreeBSD 3.2, to an Alpha machine running on FreeBSD 4.0
CURRENT-2101. The Alpha consists of Digital
On Tue, Jan 11, 2000 at 06:01:53PM -0800, Rodney W. Grimes wrote:
(ie, whatever letters you use, please just divide the values
by 1000 instead of 1024).
Please don't, there is already far to much precedence in both the
computing world and other commands (df -k and du -k come to mind
On Tue, 11 Jan 2000, Donn Miller wrote:
Or else we could put both in. There could be either a command-line
option or env variable set that selects between decimal (true metric)
or powers of two (computer metric, or whatever).
What about making ls sensitive to $BLOCKSIZE, but only if enabled
On Tue, 11 Jan 2000 11:35:27 +0100, Trond Endrestol wrote:
This is something you might want to put in /etc/rc in both -stable
and -current.
Scenario:
/tmp is MFS,
/var/tmp, /usr/tmp and /usr/local/tmp are symlinks to /tmp,
Not until someone can explain how making /var/tmp a symlink to
Hi,
This is something you might want to put in /etc/rc in both -stable
and -current.
Scenario:
/tmp is MFS,
/var/tmp, /usr/tmp and /usr/local/tmp are symlinks to /tmp,
and hence /var/tmp/vi.recover does not exist at reboot and causes
«cosmetic interference» on the console during reboot.
81 matches
Mail list logo
